Jump to content
EricJ

Super Hornet Package for SF2 v4.1

Recommended Posts

You mean  the modex numbers?

EDIT: I checked the files and they're all there. There are no decals other than the modex number (1xx, 2xx, etc.), so after checking it checks out.

Edited by EricJ

Share this post


Link to post
Share on other sites

I have checked, those numbers of the vf-2 are missing

Captura de pantalla 2023-04-17 230258.png

Share this post


Link to post
Share on other sites

I don't understand, there should be more folders in there than that. And as a test I checked the download, and all the files are there, so I think you deleted the folders by accident. The VFA-2 (Late) skin is in the FA-18F_BlkII folder. The decals are in the FA-18F folder, which is missing. Did you delete them by accident?

Edited by EricJ

Share this post


Link to post
Share on other sites

Also tweaked the ALQ-99G Jammers to work in-line with the EA-6B Superpack. I figure that HomeFries and Co. did some good research on the jammers and figured that I can use that. What I did was make the jammers more powerful and tweaked the maximum frequency for the -L jammer pod as well. It will be in the next update but decided to upload them here now:

 

Edited by EricJ

Share this post


Link to post
Share on other sites

In going through the EA-6B Superpack I noted some progression in the power of the ALQ-99s that they modeled. So I added more power to the ALQ-99s that the Growlers use, and also the podded ones too (Low and High-band): Against Farid's SA-10 burn-through is about 15 miles or so. That's a bit better and probably realistic (I don't know how effective the real world one is of course, just taking the hint that they upgraded the pods over the years, and I'm sure it's pretty good so far). Replace the jammers and overwrite and you'll be good to go. It will be in a next update, but that won't be for some time.

ALQ99.7z

Share this post


Link to post
Share on other sites

Also tweaked the ECM in the Block II birds (E/F) and EA-18Gs (RAAF included). Until it gets updated here are the new values:

[ECM]
ReferenceName=AN/ALQ-214v5
SystemType=ECM_JAMMER
JammerType=DUAL_MODE
JammerStrength=118.8
MinFreq=2.0
MaxFreq=20.0
CanJamCW=TRUE
MinExtentPosition=-0.404,-2.859,0.608
MaxExtentPosition=0.404,-0.824,1.018

Simply copy and paste, and go fly. It will be included in a new update sometime.

Share this post


Link to post
Share on other sites

For the Growlers put this:

ReferenceName=AN/ALQ-214v5
SystemType=ECM_JAMMER
JammerType=NOISE_JAMMER
JammerStrength=118.8
MinFreq=2.0
MaxFreq=20.0
CanJamCW=TRUE
MinExtentPosition=-0.404,-2.859,0.608
MaxExtentPosition=0.404,-0.824,1.018

Share this post


Link to post
Share on other sites

Updated Growler ECM, simply open your EA-18G_Data.ini and replace it with this. This should be a final edit until the miracle happens that ECM pods work (don't ask me when as I don't know either):

[ECM]
ReferenceName=ALQ-99
SystemType=ECM_JAMMER
JammerType=NOISE_JAMMER
JammerStrength=150.0
MinFreq=2.0
MaxFreq=20.0
CanJamCW=TRUE
MinExtentPosition=-0.404,-2.859,0.608
MaxExtentPosition=0.404,-0.824,1.018

The next update will have this data. I don't know when I'll upload but figured players could use the better ECM.

  • Thanks 1

Share this post


Link to post
Share on other sites

Here are some updated decals for the EA-18G and the new skins that I've been putting out that have the new decal system installed. Simply overwrite the current ones and go fly. I can't update the decals.ini one by one but it now goes from 500 to 505 for the new textures.

Objects.7z

Share this post


Link to post
Share on other sites

One of the improvements I'm seeking with the next update is the centerline tank being  skinnable separate from the tanks. At present it's only one  texture for the tanks and after some soul-searching I came to the decision to ask FastCargo to make a separate texture for the center tank. This will give skinners more flexibility in doing skins and unfortunately something that I obviously didn't think of due to lack of knowledge of USN schemes and the like. Well I managed to start the process with this 7z file having the extra tank skin already done. Thankfully there isn't much variation so here you go, all of the EA-18G skins that I have done so far. I may go back and re-upload skins (haven't been too motivated given all the work I've done) or just keep this handy for you all to use when you do download a skin. But here are the extra files for the center tank. It's just making sure you have it. Future skins after this post will  have the center tank skin handy so no worries as I'll have them covered. Thus here are all  of the  EA-18G ones, pick and choose and hopefully the next update will have this feature.

EA-18GSkins.7z

Share this post


Link to post
Share on other sites

Here are the F/A-18F Block II skin tanks. Again it will be some time before it'll be live, but I figured since nothing was happening I might as well knock it out. More than  likely I won't re-upload the skins, and have to deal with people having issues to point to this post.

FA-18F_BlkIISkins.7z

  • Like 1

Share this post


Link to post
Share on other sites

You need to edit the options.ini for your install mod folder, or the game will default to the start year. As for bombs and stuff you need to download a weapons pack from the Downloads section, as there should be no issue with loading bombs and rockets shouldn't work as by default they're not setup due to the angled pylons. You need to edit this:

[SingleMission]
AircraftType=F-4E_75
Service=USAF
MissionMap=DESERT
MissionType=SWEEP
MissionTime=RANDOM
MissionWeather=RANDOM
AirActivity=RANDOM
AirDefenseActivity=RANDOM
FlyAll=FALSE
LoadMission=TRUE
LoadMissionFilename=C:\Users\flank\Saved Games\ThirdWire\StrikeFighters2\Missions\SoCal Mountain Warfare Trainer.MSN
MissionDate=1975
StartYear=1948
EndYear=2050

EditMission=FALSE

 

Edited by EricJ

Share this post


Link to post
Share on other sites

Update for the Growlers for the current USN operations in the Persian Gulf:

[LeftOuterWingStationAHM]
SystemType=WEAPON_STATION
StationID=7
StationGroupID=1
StationType=EXTERNAL
AttachmentPosition=-4.6057,-0.9769,-0.1579
AttachmentAngles=-4.0,-3.0,0.0
LoadLimit=157.100000
DiameterLimit=0.179000
LengthLimit=3.66000
AllowedWeaponClass=IRM
AttachmentType=USN
ModelNodeName=LeftOuterPylon
PylonMass=135.7
PylonDragArea=0.03
LaunchRailNodeName=LeftOuterAHMRail
LaunchRailHeight=0.158
MinExtentPosition=-4.376,-3.085,-0.179
MaxExtentPosition=-4.717,-0.585,0.333

[RightOuterWingStationAHM]
SystemType=WEAPON_STATION
StationID=8
StationGroupID=1
StationType=EXTERNAL
AttachmentPosition=4.6057,-0.9769,-0.1579
AttachmentAngles=4.0,-3.0,0.0
LoadLimit=157.100000
DiameterLimit=0.179000
LengthLimit=3.66000
AllowedWeaponClass=IRM
AttachmentType=USN
ModelNodeName=RightOuterPylon
PylonMass=135.7
PylonDragArea=0.03
LaunchRailNodeName=RightOuterAHMRail
LaunchRailHeight=0.158
MinExtentPosition=4.376,-3.085,-0.179
MaxExtentPosition=4.717,-0.585,0.333

 

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Hi Eric, is the Next Generation Jamming pod AN/ALQ-249(V)1 in the works for the Growler at all by any chance?

Share this post


Link to post
Share on other sites

I was planning on it as I need to do a Block III version of the Growler, and the newer pods would need to be done. When that happens isn't set in stone, but it is planned.

Share this post


Link to post
Share on other sites
On 26/04/2024 at 9:28 AM, EricJ said:

I was planning on it as I need to do a Block III version of the Growler, and the newer pods would need to be done. When that happens isn't set in stone, but it is planned.

Look forward to it mate! I noticed what I think is a typo with the engine nozzle animation settings. Try the values below and see what you think. They weren't opening and closing properly and I have tried to get the 'shape' of the nozzle at full AB/ Idol slightly tapered like the real thing.


IdleNozzle=0.65

CruiseNozzle=0.0

MilNozzle=0.0

MaxNozzle=0.0

FullABNozzle=0.65

AfterburnerEffectSize=0.775

Share this post


Link to post
Share on other sites
53 minutes ago, dtmdragon said:

Look forward to it mate! I noticed what I think is a typo with the engine nozzle animation settings. Try the values below and see what you think. They weren't opening and closing properly and I have tried to get the 'shape' of the nozzle at full AB/ Idol slightly tapered like the real thing.


IdleNozzle=0.65

CruiseNozzle=0.0

MilNozzle=0.0

MaxNozzle=0.0

FullABNozzle=0.65

AfterburnerEffectSize=0.775

I'll give it a shot, but where do I find this? In the [Engine] portion of the Data.ini?

Share this post


Link to post
Share on other sites

Nevermind, found it. Anyway looks pretty good so far.

Share this post


Link to post
Share on other sites
15 minutes ago, EricJ said:

I'll give it a shot, but where do I find this? In the [Engine] portion of the Data.ini?

Correct, here is the entire section for the F/A-18F that I have changed to the values above. Arrows showing the changes.

[Engine1]
ReferenceName=General Electric F414-GE-400
SystemType=JET_ENGINE
InputName=THROTTLE_CONTROL
EngineID=1
HasAfterburner=TRUE
NumAfterburnerStages=4
SLThrustDry=62300.00
SLThrustWet=97900.00
ThrustAngles=0.0,0.00,0.0
ThrustPosition=-0.4912,-6.7577,0.0799
ThrottleRate=0.75
NozzleAnimationID=10
IdleThrottle=0.10
IdleRPM=0.61
IdleNozzle=0.65 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
CruiseThrottle=0.37
CruiseRPM=0.82
CruiseNozzle=0.0 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
MilThrottle=0.65
MilRPM=0.90
MilNozzle=0.0 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
MaxThrottle=0.78
MaxRPM=1.0
MaxNozzle=0.0 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
FullABThrottle=1.12
FullABRPM=1.05
FullABNozzle=0.65 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
AltitudeTableNumData=10
AltitudeTableDeltaX=3048.0
AltitudeTableStartX=0.0
AltitudeTableData=1.000,0.802,0.634,0.496,0.381,0.288,0.206,0.147,0.105,0.000
DryMachTableNumData=4
DryMachTableDeltaX=0.4
DryMachTableStartX=0.0
DryMachTableData=1.000,0.980,1.172,0.000
WetMachTableNumData=7
WetMachTableDeltaX=0.4
WetMachTableStartX=0.0
WetMachTableData=1.000,0.991,1.207,1.683,2.473,2.750,3.027
MaxInletTemperature=120
GyroscopicInertia=
TSFCM0=0.505  
TSFCM1=0.818
AfterburnerTSFC=1.776
MinFuelFlow=0.01
ExhaustEmitterName=CleanExhaustEmitter
ExhaustPosition=-0.4912,-6.7577,0.0799
AfterburnerNodeName=LeftAB
AfterburnerEmitterName=F18AfterburnerEmitter
AfterburnerEffectSize=0.775 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
MinExtentPosition=-0.889,-6.819,-0.296
MaxExtentPosition=0.889,-5.022,0.465
FireSuppression=TRUE
GasTempMaxRPM=680.0
GasTempIdleRPM=420.0
GasTempChangeRate=5.0
OverheatTemp=750.0
DamageTempDelta=100.0
OilPressMaxRPM=35.0
OilPressIdleRPM=55.0
OilPressChangeRate=0.5
LowOilPress=12.0
LowOilTempDelta=400.0

[Engine2]
ReferenceName=General Electric F414-GE-400
SystemType=JET_ENGINE
InputName=THROTTLE_CONTROL
EngineID=2
HasAfterburner=TRUE
NumAfterburnerStages=4
SLThrustDry=62300.00
SLThrustWet=97900.00
ThrustAngles=0.0,0.0,0.0
ThrustPosition=0.4912,-6.7577,0.0799
ThrottleRate=0.75
NozzleAnimationID=10
IdleThrottle=0.10
IdleRPM=0.61
IdleNozzle=0.65 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
CruiseThrottle=0.37
CruiseRPM=0.82
CruiseNozzle=0.0 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
MilThrottle=0.65
MilRPM=0.90
MilNozzle=0.0 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
MaxThrottle=0.78
MaxRPM=1.0
MaxNozzle=0.0 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
FullABThrottle=1.12
FullABRPM=1.05
FullABNozzle=0.65 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
AltitudeTableNumData=10
AltitudeTableDeltaX=3048.0
AltitudeTableStartX=0.0
AltitudeTableData=1.000,0.802,0.634,0.496,0.381,0.288,0.206,0.147,0.105,0.000
DryMachTableNumData=4
DryMachTableDeltaX=0.4
DryMachTableStartX=0.0
DryMachTableData=1.000,0.980,1.172,0.000
WetMachTableNumData=7
WetMachTableDeltaX=0.4
WetMachTableStartX=0.0
WetMachTableData=1.000,0.991,1.207,1.683,2.473,2.750,3.027
MaxInletTemperature=120
GyroscopicInertia=
TSFCM0=0.505  
TSFCM1=0.818
AfterburnerTSFC=1.776
MinFuelFlow=0.01
ExhaustEmitterName=CleanExhaustEmitter
ExhaustPosition=0.4912,-6.7577,0.0799
AfterburnerNodeName=RightAB
AfterburnerEmitterName=F18AfterburnerEmitter
AfterburnerEffectSize=0.775 <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<< <<<<<<<<<<<<<<<<<<<<
MinExtentPosition=-0.889,-6.819,-0.296
MaxExtentPosition=0.889,-5.022,0.465
FireSuppression=TRUE
GasTempMaxRPM=680.0
GasTempIdleRPM=420.0
GasTempChangeRate=5.0
OverheatTemp=750.0
DamageTempDelta=100.0
OilPressMaxRPM=35.0
OilPressIdleRPM=55.0
OilPressChangeRate=0.5
LowOilPress=12.0
LowOilTempDelta=400.0

  • Like 1

Share this post


Link to post
Share on other sites

Thanks it'll be in the next update in two weeks

  • Like 1
  • Thanks 2

Share this post


Link to post
Share on other sites

Here you go, a little late but should work fine, as this is for Operation Prosperity Garden, simply copy and paste save and with the Mission Editor select it:

[ProsperityGarden]
Loadout[01].WeaponType=AIM-9X
Loadout[01].Quantity=1
Loadout[02].WeaponType=AIM-9X
Loadout[02].Quantity=1
Loadout[09].WeaponType=AIM-9X
Loadout[09].Quantity=1
Loadout[10].WeaponType=AIM-9X
Loadout[10].Quantity=1
Loadout[17].WeaponType=AIM-120D
Loadout[17].Quantity=2
Loadout[17].RackType=LAU-115CA
Loadout[18].WeaponType=AIM-120D
Loadout[18].Quantity=2
Loadout[18].RackType=LAU-115CA
Loadout[28].WeaponType=ATFLIRSH
Loadout[28].Quantity=1
Loadout[30].WeaponType=AIM-120D
Loadout[30].Quantity=1
Loadout[31].WeaponType=Tank480_FA18EFG
Loadout[31].Quantity=1

  • Thanks 2

Share this post


Link to post
Share on other sites

Here is the current (new) setting for the Super Hornets, Block II and III:

[ECM]
ReferenceName=AN/ALQ-214v5
SystemType=ECM_JAMMER
JammerType=DUAL_MODE
JammerStrength=100.0
MinFreq=2.0
MaxFreq=20.0
CanJamCW=TRUE
MinExtentPosition=-0.404,-2.859,0.608
MaxExtentPosition=0.404,-0.824,1.018

And updated ALQ99G pod

ALQ99G.7z

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..