Old P-51 Cockpit

[+Cliff7600 1,148]

Hello

 

Maybe some of you did this before, as it is an old cockpit.

It's the P-51 pit and I'd like to know if you already found out the mesh names of the needles in the red circles.

Maybe some tips about fixing the slip ball and the 10 000 ft counter? (red arrows)

 

I found the "suction_needle" :)

But "manifold_needle", "fuelflow_needle" are no-go...

 

 

 

Thanks

Edited November 19, 2011 by Cliff11

[Wrench 9,870]

the one used on Wolf's D-30?? There should be an OUT file in the folder (there is in mine)

 

iirc, there are 2 Mustang pits floating around ...

the older is just called "P-51D_Cockpit" and has a LOD date of 2/13/2003

the one in Wolf's is called "P-51d30pit" and has a LOD date of 10/14/2005

 

Way back then, it quite possible those functions weren't yet game supported (although the slipball damn well should be!! )

 

alternatively, there's alway's TKs stock one from ExpPak1

Edited November 19, 2011 by Wrench

[+Cliff7600 1,148]

Ok I'll search for the Wolf's D-30

 

Thank you!

[Wrench 9,870]

don't forget Stary's 'generic' WW2 pit pak too, -- worked pretty good on the Jugs I uploaded a few weeks back

[+RAVEN 414]

P-51D

P-51D_Cockpit.lod File date: 02-13-2003

 

compass_needle

Course_needle

Hourhand_needle

Minutehand_needle

Secondhand_needle

climb-dive_needle

G_needle

alt_100_needle

bank_needle

alt_1000_needle

oil_press_needle

ext_gas_needle

int_gas_needle

carbair_needle

coolant_needle

airspeed_needle

RPM_needle

suction_needle

manpress_needle

 

ADI_ball

 

Raven

 

 

[+Cliff7600 1,148]

Thank you very much Raven, you're the man

 

Very valuable