+Veltro2k Posted March 16, 2012 Posted March 16, 2012 The minute the game loads before I can even take off, the plane gets damaged on the runway. what can cause this ? Collisin points ?, aircraft position in MAX ? Quote
+Florian Posted March 16, 2012 Posted March 16, 2012 Ed, check the Prop Diameter in the Data.ini! Looking at the pic, the engine is damaged and most of the time it´s the diameter. Not sure why, but i got sometimes this result even with diameters that should work, but have success with values that are way to small. Quote
+russouk2004 Posted March 16, 2012 Posted March 16, 2012 I had this prob various times and fix I had to do was coll points for engine I think it was,but it may be the prop in your case yes. Quote
+Veltro2k Posted March 16, 2012 Author Posted March 16, 2012 this is the engine Specs SystemType=PROP_ENGINE InputName=THROTTLE_CONTROL EngineID=1 SLPowerDry=1063000.00 ThrustAngles=0.0,0.0,0.0 ThrustPosition=0.0000,0.000,0.000 ThrottleRate=0.5 AltitudeTableNumData=10 AltitudeTableDeltaX=1524 AltitudeTableStartX=0.0 AltitudeTableData=1.000,0.990,0.990,0.990,0.990,0.990,0.970,0.700,0.100,0.000 TSFCM0=0.90 TSFCM1=1.26 SpinnerNodeName=Spinner StaticPropNodeName=Prop SlowPropNodeName=SlowProp FastPropNodeName=FastProp SlowPropRPM=600 FastPropRPM=2500 MaxPropRPM=3000 IdlePropRPM=500 BSFC=0.010 ExhaustEmitterName=CleanExhaustEmitter ExhaustPosition=-0.5839,2.2828,-0.0172 FireSuppression=TRUE MinExtentPosition=-0.69,2.12,-0.648 MaxExtentPosition=0.66,3.12,0.702 ; new entries AnimationID= MaxPowerAnimationTime=0.1 MinPowerAnimationTime=0.3 PropRotationDirection= ReversePropOrientation=FALSE ConstantSpeed=TRUE NumBlades=5 PropDiameter=2.00 MomentOfInertia=2.25 PropEfficiencyAdvanceRatioTableNumData=11 PropEfficiencyAdvanceRatioTableDeltaX=0.2 PropEfficiencyAdvanceRatioTableStartX=0.0 PropEfficiencyAdvanceRatioTableData=0.023,0.39,0.60,0.80,0.86,0.87,0.87,0.87,0.87,0.86,0.85 Quote
+Florian Posted March 16, 2012 Posted March 16, 2012 Try lowering the Prop Diameter: Change PropDiameter=2.00 to PropDiameter=1.00 and see what happens. If the Problem still exists, play with the collision points or min max extension values. Quote
+Veltro2k Posted March 16, 2012 Author Posted March 16, 2012 Try lowering the Prop Diameter: Change PropDiameter=2.00 to PropDiameter=1.00 and see what happens. If the Problem still exists, play with the collision points or min max extension values. Yep thank you Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.