Jump to content
Sign in to follow this  
VonS

New Mac OS Versions and FE2

Recommended Posts

Hello gents',

A quick heads up for those running FE2 in WineSkin on a Mac - keep in mind that FE2 is a 32-bit program. MacOS 10.15 and later will not be supporting 32-bit programs anymore (only 64-bit). This of course is a problem considering that WineSkin (and other Wine programs for Macs) are currently 32-bit. While WineSkin may eventually go 64-bit (this is a slim possibility), there is no guarantee that 32-bit programs like FE/FE2 will be able to run in it even if it is 64-bit, considering that MacOS 10.15 and later are stripping out most if not all of the 32-bit code from their OS. This leaves Mac fliers of FE2 in a precarious position. Options are eventually to go over to Windows and drop fiddling with WineSkin, or to keep running your older Intel Macs (like my 2012 quad-core Mini), or grab another Mac and sort of future-proof yourself, with something like a Mac Pro or the newer Mac Mini (2018), providing you don't upgrade past MacOS 10.14 (last one to support 32-bit). SF2 by the way is 64-bit, and so is WOFFue - so those are good to go into the future of 64-bit OSes, on the Windows side. No guarantees that you will be able to fly WOFF/SF2 in future Mac OSes however because WineSkin may remain 32-bit only (no telling what's going to happen with Wine on a Mac at this point). Have been reading some forums that the Wine folks may move over to Linux entirely if the Mac world drops 32-bit...not good news for legacy simming/gaming. Anyway, I'll probably future-proof myself in some way with an extra Mac or two since I like running FE2 in WineSkin and there's no dropping FE2 once you get the modding bug. :biggrin:

Happy flying,

Von S :flyer:

UPDATE: The CodeWeaver folks working on CrossOver (a fork of Wine) may be developing a way for 32-bit code/libraries to be loaded into a 64-bit version of Wine - something that may eventually be ported to the general branch of Wine too - but again this is work in progress and no telling what will happen until the dust settles down over the next couple of years, in terms of 32-bit gaming on a Mac, in Wine. Linux has a 64-bit version of Wine that can load 32-bit code for older games, and it seems to have had this for several years already - but this is not relevant to gaming on a Mac. Will update this post further if any (good) news emerges.

Edited by VonS
Added info.

Share this post


Link to post
Share on other sites

Further update to this Mac-related thread: FE2 and RB3D work fine in WineSkin on MacOS Mojave (10.14) - for FE2, the same recommended install procedure posted under the relevant WineSkin thread (under the stickies section) works fine, using the Wine8 ver. 1.5.1 engine, the best engine to use for FE2 since decent frame rates can be attained on it.

Have also tested FE2 in Win10 under BootCamp on my MacPro and it bogs down at around 10 fps with the AMD FirePro D700 cards - but runs beautifully in WineSkin on the MacOS side. :biggrin: I included the higher quality mesh-size flightengine.ini file and frame rates still run around 50-60 fps, about 80-120 fps with the lower quality flightengine.ini file. If running FE2 on integrated Intel video cards - the lower quality flightengine.ini file is recommended. Have kept most settings in the FE2 game menu at medium since there wasn't much difference between medium and high, while fps suffer at high settings.

Will do some further testing with FE2 on the BootCamp side to see if frame rates improve by running it in Win7 compatibility mode - otherwise WineSkin is still recommended for running FE2 on a Mac, in OS versions ranging from Snow Leopard (10.6) to Mojave (10.14). System 10.12 (Sierra) and above require however that you disable "system integrity protection" in the terminal window, or games in WineSkin won't load.

Happy flying and happy holidays,

Von S :drinks:

Edited by VonS
Added info.

Share this post


Link to post
Share on other sites

Hello fellow FE/FE2 flyers, here are the latest Mac-related updates.

WineSkin is still the simplest choice up to ver. 10.14 of MacOS to run FE2 on your Mac side...ave. fps are between 50 and 80 at medium graphics settings and a resolution of 1600 x 900 on my rig (Mac Pro 2013). Also good is that FE2 now runs fine in Win10 on the BootCamp side of the Mac....the trick, as posted in another thread earlier by gTerl and others, is to include the dx9 driver directly in your FE2 game (not user directory) folder. I'm getting good results with the generic dx9 driver included with the enb-series v. 0.076 package, located at the following link:

http://enbdev.com/mod_generic_v0076.htm

The only thing you need from that file is the dx9 driver. Ave. fps range from about 60 to 150 on the Win10 side of the Mac Pro with that driver in the FE2 folder...my previous tests with the dx10 and dx11 drivers installed, and advanced shaders set to "1" (on) and dx9 set to "false," in the options.ini file, have been filed away...yes fps gets into the 200 to 300 range but the sky and clouds look less subtle, peripheral/horizon fog flickers on occasion, and the classic, thin line water droplets disappear from the inclement effects. Also nicer I think are the landscapes with the older driver - more atmospheric. Aircraft and pilot shadows may of course be set to on if you are running a discrete graphics card or two (not recommended on Intel integrated vid. cards). Occasional crashes were also experienced with the dx10 and 11 driver installed - no such problems with dx9.

Recommended in the options.ini file is to set advanced shaders to off (0), to set dx9 to "true," and vsync off to "true." Also recommended are the following settings in the AMD control panel in BootCamp, basically the same ones that work well for WOFFue:

- anti-aliasing mode (override application settings)
- anti-aliasing level (4xEQ)
- anti-aliasing filter (Edge Detect)
- anti-aliasing method (Adaptive multisampling)
- morphological filtering (off)
- anisotropic filtering mode (override application settings)
- anisotropic filtering level (8x)
- texture filtering quality (high)
- surface format optimization (off)
- wait for vertical refresh (off, unless application specifies)
- opengl triple buffering (off)
- shader cache (on)
- tessellation mode (override application settings)
- maximum tessellation level (16x)
- AMD crossfire mode (optimize 1x1)
- frame pacing (on)

The great thing about Win10 in BootCamp is that all of the in-game settings can be run at high/ultimate with no problems...the only recommendation, if you like shadows enabled, is to set them no higher than "medium," to avoid any possible shadow flickering (although with dx9 instead of dx10 enabled, there shouldn't be any flickering visible...).

Happy flying,

Von S :smile:

Share this post


Link to post
Share on other sites

Representative pics with dx9 enabled (subtler clouds, better peripheral fog, classic rain drops visible together with the tga file raindrops, more realistic/subtle smoke and fire effects). Resolution at 1920 x 1080 in BootCamp, by the way.

Von S :flyer:

img00001.JPG

img00002.JPG

img00003.JPG

img00004.JPG

Edited by VonS
Added info.

Share this post


Link to post
Share on other sites

Good news on the WineSkin side of things too - dropping the dx9 driver into the FE2 game folder, within the WineSkin wrapper, improves the fps on the Mac side as well. Recommended is to set dx9 to "true" in the options.ini file, and enhanced shaders to off (0), as specified in the post above for BootCamp. Smooth fps can be attained then, and it's fine to increase the resolution to 1920 x 1080. The in-game (graphics) settings in FE2 running in WineSkin should be set to "medium" - otherwise there is slight stuttering at high settings. (The MacOS side doesn't crossover/link the two video cards on the Mac pro...while in BootCamp high/unlimited settings are fine in FE2.) It's possible that dropping the dx9 driver into the FE2 game folder even on Macs running Intel integrated vid. cards, such as the Mac Mini, might lead to fps boosts. Some representative pics below of FE2 in WineSkin with the dx9 driver in the game folder (pics. in the post above are from BootCamp...at unlimited/high settings.) GTerl's Caporetto terrain also works great in WineSkin, by the way.

Happy flying,

Von S :flyer:

NOTE: recommended, with the dx9 tweak, is the higher mesh size flightengine.ini file, for your Flight folder, even if you have FE2 installed in WineSkin - in BootCamp I have the higher mesh size flightengine.ini file running and it works fine, even with high/ultimate graphics settings in game. Pics. below are with the higher mesh size and medium graphics settings, in WineSkin. For integrated vid. cards, best is to use the simpler/default flightengine file (both are included with the ver. 9.5 FM update pack).

img00001.JPG

img00002.JPG

img00003.JPG

Edited by VonS
Added info.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By VonS
      Hi All,
      Have been doing a bit of tinkering lately with my FlightGear install (see this thread for more info.) - and results are pleasing enough in what is a free, open-source flight sim. Managed eventually to get accurate photo-scenery working in FG, which is a noticeable improvement over the stock (dated) scenery that has been available in that sim for years on end (see pic. below for photo-scenery at work in FG, in this case in the Mesopotamian/s. Iraqi area; the Alb. D.I is a re-skin and FM-overhaul of a model done by Lester Boffo).

      On a hunch, I then converted a bunch of the photo-tiles from FG (stock format is DDS) to BMP format - so that they become visible in the FE2 terrains folder - and it does indeed work - but would require careful, aesthetic choices regarding what tiles to replace in the terrains folder, such as farms, cities, deserts, etc. - for best cohesion and not too many jarring disconnects between tiles.
      Nice to see that stock trees and buildings are populating over the satellite/ortho-terrains too, in FE2. Photo-scenery is simply an improved "satellite" carpet that covers the stock scenery and terrain framework in FlightGear - and by extension works the same way in the ThirdWire sims but requires manual conversion to BMP format and manual placement in the terrains folder (perhaps the DDS format would work too, but I didn't bother tinkering with the various settings/text files this time around in the terrains folder).
      The other good thing about FlightGear is that it is fully under the GNU GPL (General Public License; i.e., "copy-left" license) - so there are no copyright problems that I know of if one borrows such ortho-scenery for FE2 too (haven't bothered to test with SF2). And if working on such a terrain swap as a personal project - that is of course even simpler.
      A few representative pics. below with just a few ortho-scenery tiles placed over Stephen1918's upgrade of the Mesopotamian theater for FE2. Results look pretty good, particularly when flying higher up, and I haven't noticed any FPS drop with the photo-scenery tiles loaded. Some old tiles are still in place in the pics., for comparative purposes. Any empty areas are where I didn't bother to load tiles.




      Anyway - I hope you find this post interesting - it's perhaps the "cheapest" way of upgrading tiles across the various theaters available for FE2.
      If I find enough free time I might tinker further with this side-project; will post comments if the results prove particularly successful.
      Cheers & good flying,

    • By VonS


      View File Tweaked Flight Models and Realism Pack for FE2
      Hello Fellow Fliers of First Eagles 2,
      Version 11.0 of the FM/Realism Package for FE2 contains approximately 220 WWI aircraft types and sub-types, for your (virtual) flying enjoyment. For detailed installation instructions, please check over the main "Read Me First" file that is included, as well as several older (pdf) files and that cover aircraft performance info., tips, etc., across all previous versions of the FM update package.
      A great many thanks go out to Peter01 and Ojcar, also TexMurphy, for making most of those flight model files to begin with. Also a great thanks goes out to Stephen1918, MontyCZ and Laton for providing lots of beautiful planes and skins that go with those great flight models, to NBell for the many hitbox improvements provided for the planes, also to VonOben, Mike Dora and Crawford for many helpful suggestions, and to the A-Team by SkunkWorks for allowing me to tweak a few of the FMs for their models too. And of course a very big thanks goes out to Geezer for several fantastic, high-quality models that were produced for FE2.
      What I've done is tinkered with the data files further. Modifications in all cases, to a greater or lesser extent, include data under the following sections:

      (a) MissionData
      (b) FlightControl
      (c) AIData
      (d) Sound
      (e) AircraftData
      (f) Engine
      (g) Crew
      (h) Internal Guns
      (i) Control Surfaces
      (j) Landing Gears
      (k) Fuselage, Nose, Tail, Vertical Tail, LeftStab, RightStab, Rudder, Left/Right/Inner/Middle/Outer/Tip Wing components
       
      Enjoy and happy flying!,
      Von S
      NOTES: For several of Geezer's latest aircraft and my FMs for those aircraft (Nieuports, Pfalzes, etc.), which are not included in this package, please see the relevant post located towards the bottom of page 25 of the "New Aircraft" thread for FE2, on CombatAce. Also see relevant posts on pages 26, 27, and 28 of that same thread for Geezer's "early beta" collection that contains the Breguet XIV, Junkers J.I, and other updates, including performance info. for some of those aircraft types.
      DISCLAIMER: All Von S mods., for FE2, SF2, also WOFFue/pe/bh&h2, as well as for RoF (United Ed.), are subject to the CombatAce "freeware" terms of agreement. Mods. may be shared with others, included on other media devices, also modded further, providing that original documentation and/or credit is included, and providing that the mods. remain free to use. Von S mods. shall not be sold, resold, etc., and Von S takes no responsibility for injuries or fixations that may result from flying heavily tweaked FMs or from attempts to enjoy real flying without aid or instruction from a qualified flight instructor.
       
      Submitter VonS Submitted 10/16/2015 Category Flight Models  
    • By VonS
      Hello Fellow Fliers of First Eagles 2,
      Version 11.0 of the FM/Realism Package for FE2 contains approximately 220 WWI aircraft types and sub-types, for your (virtual) flying enjoyment. For detailed installation instructions, please check over the main "Read Me First" file that is included, as well as several older (pdf) files and that cover aircraft performance info., tips, etc., across all previous versions of the FM update package.
      A great many thanks go out to Peter01 and Ojcar, also TexMurphy, for making most of those flight model files to begin with. Also a great thanks goes out to Stephen1918, MontyCZ and Laton for providing lots of beautiful planes and skins that go with those great flight models, to NBell for the many hitbox improvements provided for the planes, also to VonOben, Mike Dora and Crawford for many helpful suggestions, and to the A-Team by SkunkWorks for allowing me to tweak a few of the FMs for their models too. And of course a very big thanks goes out to Geezer for several fantastic, high-quality models that were produced for FE2.
      What I've done is tinkered with the data files further. Modifications in all cases, to a greater or lesser extent, include data under the following sections:

      (a) MissionData
      (b) FlightControl
      (c) AIData
      (d) Sound
      (e) AircraftData
      (f) Engine
      (g) Crew
      (h) Internal Guns
      (i) Control Surfaces
      (j) Landing Gears
      (k) Fuselage, Nose, Tail, Vertical Tail, LeftStab, RightStab, Rudder, Left/Right/Inner/Middle/Outer/Tip Wing components
       
      Enjoy and happy flying!,
      Von S
      NOTES: For several of Geezer's latest aircraft and my FMs for those aircraft (Nieuports, Pfalzes, etc.), which are not included in this package, please see the relevant post located towards the bottom of page 25 of the "New Aircraft" thread for FE2, on CombatAce. Also see relevant posts on pages 26, 27, and 28 of that same thread for Geezer's "early beta" collection that contains the Breguet XIV, Junkers J.I, and other updates, including performance info. for some of those aircraft types.
      DISCLAIMER: All Von S mods., for FE2, SF2, also WOFFue/pe/bh&h2, as well as for RoF (United Ed.), are subject to the CombatAce "freeware" terms of agreement. Mods. may be shared with others, included on other media devices, also modded further, providing that original documentation and/or credit is included, and providing that the mods. remain free to use. Von S mods. shall not be sold, resold, etc., and Von S takes no responsibility for injuries or fixations that may result from flying heavily tweaked FMs or from attempts to enjoy real flying without aid or instruction from a qualified flight instructor.
       
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..