Polovski

If it worked fine with previous joystick it suggests something is incorrect with the new setup with your throttle. Make sure you only have 1 axis assigned to Throttle and only from 1 controller. Check things like brakes and so on if it's during take off perhaps the rudder pedals have toe brakes too?

Two main ways, one bring up the TAC, then select a target, then cycle your view to player/target - and then you can toggle that view between you and the target or vice versa. Section 22 of the WOFF BH&H II FAQ document (see support page on main website) for more details. Or use the experimental Observer mode. "J" key by default. You may see oddities with this but see section 24 of the FAQ.

Hi all, 28 October 2021: A new update to V1.17 is available for WOFF BH&H II. -which provides some superb new improvements. The improved visuals from new trees, terrain, lighting, updated clouds and more are well worth updating to! Please see the WOFF BH&H II download page on our website for more information. WOFF BH&H II CHANGE LOG: Version 1.17 1) Jasta 66 is now enabled and playable. 2) Revised Scenery Trees and Textures - all seasons, and all snow cover options. 3) Revised Scenery Lighting 4) Revised Scenery Object distance details 5) Revised Terrain Texture Quality settings and Scenery Density settings to improve FPS. NOTE: Revised Scenery and Terrain Texture detail controls 1 to 5 in Workshops The Terrain Quality (texture sharpness) and the Scenery Density (objects on the terrain) have been revised for WOFF 1.17. The controls now give a better ability to more finely tune and optimise the scenery and terrain to get maximum FPS with the best visual eye candy possible. Good starting points on a reasonably good PC are Terrain Quality 2 or 3 and Scenery Density 3 or 4, - 5 now being for very good GPUs 3080 or better. 6) Revised Clouds, Textures, and Lighting. This patch of course also includes all the previous updates

Thanks for the posting that here Sam - I am sure it will help others.

Ok great glad you got there sorry I missed the post here. Always best to contact support regarding order numbers.

Hi all, At this time we have not yet tested WOFF or WOTR with Windows 11. So for the moment our recommendation is to wait until we have done so before you upgrade to Windows 11 if possible. We hope to try WOTR and WOFF as soon as it's available officially to us.

Hi Guys, see the news announcement for what's next for WOTR.

Hi Sam, it sounds like something is blocking our DLL or it's an admin rights issue (Windows 10 has quite variants of rights issues). Try setting both WOFF.exe and cfs3.exe compatibility settings to "run this program as an administrator." To do that in \OBDSoftware\WOFF\OBDWW1 Over Flanders Fields\ folder find cfs3 application, right click on it, Properties, compatibility tab, tick/check "run this program as an administrator". Click apply. and OK. Do same for WOFF exe. Then restart the PC. Mainly as per steps 13 and 14 in the FAQ section 17.) You may also need to exclude WOFF.exe and cfs3.exe from scanning in your AV. Otherwise contact us on support see the Support page on our website to get the FAQ, which explains how to contact and what files we'd need (note do NOT post any log files in any forum please). PS Don't install WOFF into a CFS3 install or anything along those lines, and do not change the CFS3.exe either.

Hi all, work progresses on the next version of WOTR. It will be an Add-On for WOTR. More details soon, but here's a stunning pic of the recent terrain update. Some of the best looking scenery around ! (I also attached the BMP version for quality) Shot09-30-21-14-47-58.bmp

Great pics guys.

Thanks, I just posted some interesting pics on the WOFF Facebook page...

Maybe more soon, but here's a couple showing revised scenery and a tweaked Spitfire.

This is a permissions issue. Windows on the odd PC seems to require this; I asked Foobat to set both Woff.exe and cfs3.exe compatibility settings to "run this program as an administrator." To do that in \OBDSoftware\WOFF\OBDWW1 Over Flanders Fields\ folder find cfs3 application, right click on it, Properties, compatibility tab, tick/check "run this program as an administrator". Click apply. and OK. Do same for WOFF exe. Then restart the PC. Mainly as per steps 13 and 14 in the FAQ section 17.

Thanks, it's not perfect but it works for all the supplied BH&H II skins. Any other skins not supplied in BH&H II may need adjusting when the stripes are made on the skin.

Hi all, 6 September 2021 A new update to V1.16 is available for WOFF BH&H II. The change log is below. Please see the WOFF BH&H II download page on our website for more information. WOFF BH&H II CHANGE LOG: Version 1.16 6 September 2021 1 ) Fixed an issue that prevented the AI bombers from bombing when player is in bombardier station. 2) Aircraft changes;a) Added BombSight to all 2 Seaters (except Nieuport 12); Aviatik BI, Aviatik BII Aviatik CI Aviatik CI SOL Aviatik CI OBS Breguet14 A2 Bristol F2b Caudron G4 DFW CV DH4 FE2b Gotha GIV Hannover Morane L Pfalz AI RAF BE2c Early RAF BE2c RAF BE2c SOL RAF BE2c OBS Re (RE8) Roland CII Rumpler CIV Sopwith Strutter B1 Sopwith Strutter b) Added Bombsight to Strutter B1 (single seater bomber). c) Also Breguet14 fixed hub of blurred prop, fixed small issue on lower LOD when zooming out. d) Fixed fuselage mapping issue on N24, N24 Bis, N24 Bis Lewis, N24 Lewis, N27. Also includes all the previous patches.

It sounds like a can-o-worms :/ will look if I can. Thanks guys.

It is just the N24 (plain) then? I can look at the model mapping something looks to have gone wonky there.

Thanks. Could be something changed along the way, if it's only RFC40 it would be hard to fix on the model if it breaks other skins.

Many thanks 76.IAP-Blackbird

PC Pilot Magazine has just published a review of Wings Over Flanders Fields Between Heaven & Hell II, in Issue 135 out now! “WOFF BH&H II is a significant enhancement of a unique and immersive simulation.” PC Pilot Score: 95% Award: PC Pilot Platinum Award https://www.key.aero/pcpilot

WOFF and WOTR have many settings in the registry. You cannot just copy it across. You could have installed fresh, then removed the new WOFF folder and pasted your old one you backed-up (provided they were the same versions etc) and that would work to some extent, although you would need to enter your order number again and mayeb reset some options if you have some non default in the Workshop. Keys/joystick settings are in the .xca files found in another location C:\Users\<Your-Logon-User-Name>\AppData\Roaming\OBD_Games\OBDWW1 Over Flanders Fields WOFFKeys.xca C:\Users\<Your-Logon-User-Name>\AppData\Roaming\OBD_Games\OBDWW2 Wings Over The Reich WOTRKeys.xca

It seems on the PC what works for one doesn't always work for another person even with the T16000M or CH pedals etc so we can't simply just add it or whatever. The FAQ has two step-by-step examples for CH pedal setups for example.

Don't forget you can skip time if your squadron is forming up or other non combat state. If you don't see the icon to skip time, make sure you have "Campaign Date Advance" set to Manual/Auto (2nd page of Workshops).

Glad you are sorted. We just read standard DirectX inputs, if controllers want to use various other axis or sliders and so on it would often need their other software (as you have used there) to alter it.

Generally the AI are on their own missions irrespective of the player. With 'forced encounters' set on you may see more action, as WOFF (and WOTR) will try to place some of those flights nearer the player path, but as they are random, and could be part way through or even finished by the time you get there anyway, so generally speaking it doesn't really matter what waypoint you start at anyway.