NeverEnough

The A-4F and A-4F_74 are located in the ObjectData003 in your Objects folder. You will need to extract the ObjectData003 with the SF2 CatPak utility available in the CombatAce downloads section.

File Name: FMA IA-58a Pucara for SF2 File Submitter: NeverEnough File Submitted: 9 Aug 2009 File Category: SF2 Series Add On Aircraft FMA IA-58a Pucara for SF2 Ver 0.9 beta / 26-12-2004 by Fox Monter – Rosario, ARGENTINA Credits: Model work and Skins by Foxmonter FAU Skin by Matthew Ouellette HeloPilot Skins by Diego Martin Baker Mk GW5 Ejection Seat by Ravenclaw_007 SF2 updates by NeverEnough Installation: Simply extract the contents of the Pucara folder into your Mods\StrikeFighters2 folder. Shift 1 will open and close the canopy. Chaff and flares have been added so you can spend more time flying, and less time dying! I can not take any responsibility whatsoever regarding using of this add-on. This is freeware addon package It is not supported by me or anyone, but your feedback with suggestions and improvements is appreciated: foxmonter@hotmail.com. Have fun :)! Click here to download this file

I just checked for the latest version of HWMonitor, and version 1.14 is the most current. It is available in the Generic Utilitiies download section at guru3d. Here is the direct link: http://downloads.guru3d.com/HWMonitor-1.14...nload-1845.html

The easy quick solution to your over heating problem is to just take off the side panel of your case. Based on your description of the fans in your case, you only have one exhaust case fan. If I remember correctly, you have a GTX280 video card, which are notorious for running hotter than a two dollar pistol! The GPU fan and the CPU cooler fan do nothing to remove heat from the case, they just cool the components they are attached to. All the pre-heated air is just being recirculated inside your case, with a small amount being expelled by the rear case fan and the power supply fan. A really great utility program that reads all the temperature sensors on the motherboard, cpu and video card is HW Monitor. I think it is available for download at guru3d.com for free under the hardware utilities download section. I'm using version 1.07, but I'm going to check right after I finish typing this to check for a newer version.

Pappy, you are a wild man with a paint gun! This looks very nice, as usual for your most appreciated work.

File Name: Super Etendard v1.00 for SF2 File Submitter: NeverEnough File Submitted: 1 Aug 2009 File Updated: 1 Aug 2009 File Category: SF2 Series Add On Aircraft Super Etendard v1.00 for SF2 by foxmonter. -------------------- Read the History and specs to know about this craft. Read The cockpit help to see the features of this cockpit. (is not 100% realistic but I try!) -------------------- Credits Model work by FoxMonter Textures by FoxMonter FM by Charles Weapons Fix & Package by capun FN Skin by Pappychksix Iraq Skin by Fire Fox Martin Baker Mk7 Ejection Seat by Ravenclaw_007 SF2 updates by NeverEnough Install. -------- Simply extract the contents of the SEtendard folder into your Mods\StrikeFighters2 folder. Shift 9 will open and close the canopy, and Shift 10 will fold the wings. DONE! ------------------- If you got low FPS, disable the shadows!, the cockpit have high polys count and large textures! but is work great on my machine. ------------------- ENJOY THE FLIGHT. Click here to download this file

The F-9J is uploaded, so is C5 doing Boopidoo's Su-15TM for NF4+. If not, I'll take care of it. How about posting a list of as yet unconverted SF1 models. It looks like everything from the list Dave put together earlier in this thread has been either finished or claimed.

I'm still waiting for Marcfighter's OK on the Gnat and the Ajeet. I'll do the conversion on the F-9J while I'm waiting.

Dels does gooooood stuff! For those of you that might not have sampled it yet, you really should take Dels F-29A for a ride. Definitely a sporty ride!

If they are not taken yet, I'll do the conversions on the Super Etendard, the Gnat and the Ajeet. A while ago Storm was working on the RA-5C, but there was some problem with the file and it never re-appeared. If Storm is busy with other projects, I've already done the A-5A and could probably bang out the RA-5C quickly. Let me know if I can help out.

Hey Prowler, it is working great for me in SF2V running XP sp3. Looking forward to your F-102!

File Name: AC-119K Stinger for SF2 File Submitter: NeverEnough File Submitted: 30 Jul 2009 File Category: SF2 Series Add On Aircraft Fairchild AC-119K Stinger for SF2 Credits: Model, Textures, Skins and Cockpit: Monty CZ Lumination Flares: Deuces SF2 Updates by NeverEnough --------------------------------------------- Installation notes: Simply extract the contents of the AC-119K folder into your Mods\StrikeFighters2 folder. --------------------------------------------- I modded the stock 7.62mm M134 MiniGun, and modeled the FLIR (forward looking infrared radar)and the LAU-74/A flare launcher. 20MM_M61A1 cannons are defined as secondary guns so have them mapped as secondary guns on your controls. To switch the Searchlight ON, press CTRL+L. Use the Page Up and Page Down keys to cycle between Ground Map Mode and TV Display. !!! AI cannot shoot with guns !!! FLIR is not supposed to be used for aiming your guns, set TV instead (radar mode). Any suggestions you can post at combatace.com Enjoy it. Monty CZ Click here to download this file

I'll do the conversions on Monty's C-119 and AC-119, assuming they are still unclaimed.

File Name: S-3B Viking for SF2 File Submitter: NeverEnough File Submitted: 23 Jul 2009 File Category: SF2 Series Add On Aircraft S-3b Viking v1.00 for SF2 by FoxMonter. Flight model by C5 Beta Tester Capun, Charles VS-27 and VS-35 Skins by Sidewinder86 SF2 updates by NeverEnough -------------------- Read the specs to know about this craft. Install. -------- Simply extract the contents of the S-3B folder into your Mods\StrikeFighters2 folder. Click here to download this file

I just submitted the A-5A for approval, so I'll do the S-3B next if it is still in need of conversion. Has anyone done Enrico's G-91 Gina's? I'll take those if they have not been converted by someone else.

Hey Wrench, I'm using the 186.18 whql drivers for my 8800GT and have had no problems with the screenshots I took this morning in SF2. I was considering updating to the 190.38 whql's this morning, but decided to get some more feedback.

File Name: F4D-1 Skyray for SF2 File Submitter: NeverEnough File Submitted: 19 Jul 2009 File Updated: 23 Jul 2009 File Category: SF2 Series Add On Aircraft F4D-1 Skyray V1.0 for SF2 Credits: Model/Cockpit/Textures/Weapons: Julhelm Flight Model: Column5 Hangar Painting: Julhelm SF2 updates by NeverEnough --------------------------------------------- Features: * Virtual cockpit * Extensive exterior detail * Accurate markings for VF-102 and VF(AW)-3 * Fueltanks with unit-specific markings * Custom FFAR Rocketpods with radar targeting and which can be used by the AI when attacking aircraft! --------------------------------------------- Installation notes: Simply extract the contents of the F4D-1 folder into your ModsStrikeFighters2 folder, and then add the info contained in the GunData text file to the GunData.ini file and run the StrikeFighter2 GunsEditor to compile the file. Click here to download this file

This checklist? S-3B Monty's C-119 and AC-119's Dels C-130's and C-123's F-11F Tiger F-9J F-102A A-5A V 3.0 A-6's F-86's I'll take care of the A-5A.

Is Julhelm's A-5A v3.0 still in need of conversion to SF2? If it's available, I'll take care of it.