MigBuster

Template set for the Mirage Factory F-16A model (2006) including a layer for the ADF model.
 
Templates were created in GIMP but are included in both .xcf and .psd format for photoshop users.
 
Before you do anything unhide all the layers to make sure it hasnt already been done!
 
Also see the README file.
 
regards
Migbuster30

Hi Res skins for the Thirdwire Strike Fighters 2 F-16A Model
 
Euro Pack 4 United States Air Force (USAF)
 
Pack consists of:
 
 
USAFGrey1 2048x2048 Early Block 1 skin
USAFGrey2 2048x2048 Late Block 1 to 10 skin
 
 
 
From August 1978 the USAF received the first of over 2000 F-16s.....
 
 
 
 
 
 
Original skin templates by Thirdwire
 
*Skin is not tested on the SF1 Thirdwire WOI model - it might work though despite the template changes.

Canberra B(I) mk12 (South African AF) for the "Strike Fighters 2" Series
by Ahmed Junaid Raza and skin by Michael (Mike1) Riddell
 
Special thanks to "Spinners" for tweaking the 3D model to be more like the real Canberra - didn't realise they were so out!
 
Updated for SF 2 series by MigBuster and Spinners (July 2009)
 
Temp gunpack by Wrench
 
 
 
The B.(I) mk12 Interdictor was a new build export version of the British B.(I) mk8
 
The SAAF received the first B(I) Mk 12 aircraft in 1963. Six B(I) Mk 12 bombers (451 to 456) and the T Mk 4 trainers (457 to 459) were operated by 12 Squadron.
 
The SAAF have used these in several regional conflicts most notibly Angola.
 
 
 
read the install instructions
 
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Touch up of the default RAF 41 sq skin skin for the Mirage Factory Jaguar GR1 (1024x1024)
 
 
 
This skin was done a while back now for myself and addresses the following:
 
1. Overall colour scheme darkened.
2. Some detail added to engine nozzles and heat shields.
3. Inside of air intakes are no longer white.
4. Mud added for all those landings on wet country roads :)
 
 
 
Have included some revised drop tank and rack skins so the colours match
 
 
Press the button below to download this skin and save it to your Desktop.
 
Jaguar GR1 model for SP4 available here:
http://forum.combatace.com/index.php?autoc...p;showfile=2910
 
Only tested in WoE but should also work in WoV/SFG/SFP1
 
 
 
Original skins by Sony Tuckson / Mirage Factory Team
 
You are allowed to modify and redistribute these files, but you must (1) give fair credit (2) distribute work based on these files under the same conditions as I did. (3) You may NOT use these files or works based on them for commercial (PAYWARE) purposes.

Taiwan (Republic of China) F-16A Block 20 skin
 
The Block 20 is an upgraded Block 15 OCU to MLU standard with Bird Slicers.
 
An actual Block 20 model is not available so please use the the Mirage Factory F-16A Block 15 OCU (Belgian Air Force) for now:
 
http://forum.combatace.com/index.php?autoc...p;showfile=3506
 
 
 
size: 1024x1024
Tested on (Mirage Factory):
 
F-16A Block 15 OCU (folder:F-16A_Blk15OCU_Baf)
 
 
Please read the README file.
 
Many thanks to the Mirage Factory for the F-16 Model.
 
Tested in WoE but should work in SF and WOV
 
 
 
Press the button below to download this skin and save it to your Desktop.
 
Coolhand29

An old updated skin given some Shark Teeth for a request.
 
Alternate South East Asia camo scheme for the Mirage Factory F-16A Block 1 and Block 10.
 
 
size: 1024x1024
Tested on (Mirage Factory):
 
F-16A Block 1 (folder:F-16A_Blk1)
F-16A Block 10 (folder:F-16A_Blk10-NDC)
 
Inlcludes a WOE style Hangar screen and some Green Drop tanks that can be installed if wanted.
 
Please read the README file to ensure the decals are installed properly.
 
 
 
Many thanks to the Mirage Factory for the F-16 Model.
 
Tested in WoE but should work in SF and WOV
 
Press the button below to download this skin and save it to your Desktop.
 
Coolhand29

Scenary skin for the F/A-18E (Falcon 4: Allied Force )
 
1024x1024
 
This is a slight rework of my E/A-18G skin - Falcon 4: Allied Force has various planes that are unskinned - and until you play the campaigns you dont realise what a killer this is seeing a bright white jet while browsing through the freindlies! Anyway its annoyed me enough to do these skins.
 
 
 
 
The included instructions are for installing the skins using LOD Editor - though trust me it ain't rocket science - just time consuming.
 
Once I have time I may get it to work with the skinpack installer from gamers tools if any demand.

Scenery Skin for the SU-32 Export Fullback (Platypus) (Falcon 4: Allied Force)
 
Falcon 4 Allied Force has planes that are unskinned - and until you play the campaigns you don’t realise what a killer this is seeing a bright white jet! Anyway it’s annoyed me enough to do these skins.
 
The SU-32 model in this sim is hopeless and I can’t find where some of the texture mapping comes from – so its limited effort at best on this one!
 
 
 
The following instructions are for installing the skins using LOD Editor: (trust me it ain't rocket science! But you need to be careful)
 
Will see about doing one for the skin pack installer if there is any need.

There are many unskinned jets in Allied Force - and I haven’t got enough years left to make skins for all of them - so if you are that bothered about unskinned jets this is a brief how to on how to convert files for use with Falcon 4:Allied Force.
 
I could just post the skins Ive converted over but they are not my skins – so you will need to do a bit of DIY.
 
 
The process is very time consuming but not difficult although probably not for the faint hearted
 
Guide is in Word 2002 and html formats.

Scenery Skin for the F/A-18F Super Hornet and E/A-18G Growler (Falcon 4: Allied Force)
 
 
1024x1024
 
Falcon 4 Allied Force has planes that are unskinned - and until you play the campaigns you don’t realise what a killer this is seeing a bright white jet! Anyway it’s annoyed me enough to do these skins.
 
 
The following instructions are for installing the skins using LOD Editor: (trust me it ain't rocket science! But you need to be careful)
 
 
 
NOTE: The same model and skin is used for the F/A-18F and E/A-18G so we are only installing this once.
 
This skin can only be installed fully using LODEditor I’m afraid due to a fault with the 3D model. Any version that uses the skin pack installer will not have skinned wheels, engine nozzles, pilots and the campaign will still use the unskinned Set 2.

USAF Vietnam Skoshi (Small) Tiger Project skin 2 for the Mirage Factory F-5C Freedom Fighter.(1024x1024)
 
Between 1965 and 1967 a single USAF squadron flew over 9000 sorties with the then new F-5C to evaluate its combat viability. The 3 phase Skoshi Tiger project included Combat Air Patrol and strike missions over North Vietnam - and ground attack/support missions over South Vietnam, Cambodia and Laos.
 
 
New Camo scheme
Higher res
Fuel tank skins included
 
 
 
Press the button below to download this skin and save it to your Desktop.
 
 
 
Only tested in WoV but should also work in WoE/SFG/SFP1 at least
 
Many thanks to the Mirage Factory for the fantastic F-5C model.
 
 
Released under CombatAce Fair-Use terms. Visit the URL below for more info.
 
http://forum.combatace.com/index.php?showtopic=26131

South Vietnam Air Force (VNAF) skin for the Mirage Factory F-5A Freedom Fighter.(1024x1024)
 
New Camo scheme
Higher res
Fuel tank skins included
 
 
 
Press the button below to download this skin and save it to your Desktop.
 
 
 
Only tested in WoV but should also work in WoE/SFG/SFP1 at least
 
Many thanks to the Mirage Factory for the fantastic F-5A model.
 
Released under CombatAce Fair-Use terms. Visit the URL below for more info.
 
http://forum.combatace.com/index.php?showtopic=26131

Yeah right - dream on - this is actually just a CCIP sight to allow you some form of level bombing and relive those FOTI days
 
 
Basic CCIP for A-6A to simulate a DIANE level bombing system.
 
For Stock A-6A WOV (Version September 2008) only tested on Hard Avionics
 
See the instructions file
 
 
 
Issues:
1. No Terrain Avoidance Radar mode with new avionics
 
2. Unguided rockets uses the same CCIP sight - its an in game thing so you will just have to ignore it
Its useless for targetting anyway.

The Last Stand
 
December 14th, 1974. Being almost certain that the US wont intervene anymore, the North Vietnamese Army (NVA) launch a full scale invasion of the Republic of South Vietnam.
Defence aid to the South from the US has been drastically reduced and the South Vietnamese economy has all but collapsed. Ammo, spares and fuel are in short supply, and so is the moral of the South Vietnamese people. Your only hope is to hold out long enough to gain renewed US support.
The South VNAF currently have the Worlds fourth largest airforce thanks to the "Enhance" and "Enhance Plus" programs from the US.........
 
 
 
Historical only in the Aircraft, Units and Air Bases used by the VNAF squadrons. Other than that you will be limited to hitting Targets in Southern NV/South Vietnam/Laos/Cambodia only - You wont be going up North - the VNAF never had the range anyway.
 
Only for Wings Over Vietnam SP4 version v08.30.06 - only tested with the default terrain also - but should be no issues adding trees etc
 
MUST be a new install - none of the stock campaigns will work after you have installed this!
 
Read the instructions - they will tell you which jets to download and where from
 
The gamplay file should give you some hints of how the campaign should be played
 
Only parts of this Mod comes under the CA Freeware licencing - read the Credits file for details
 
 

Northrop F-5E Tiger II (Mirage Factory ) - CombatAce or www.column5.us
Northrop F-5A Freedom Fighter (Mirage Factory) - CombatAce or www.column5.us
Douglas A-1HVNAF and A-1JVNAF Skyraiders - Razbam “The Skyraiders Vol 2” for SF.(www.razbam.org) Payware see note below
AN-2 Colt (Pasko & Team)- www.column5.us
Bell “Armed” UH-1H “Huey” - at CombatAce - you need to get the UH-34 also as below.
Douglas AC-47 “Spooky” - “A Team” Skunkworks (http://cplengineeringllc.com/SFP1/ )
Cessna A-37B Dragonfly – “A Team” Skunkworks (http://cplengineeringllc.com/SFP1/ )
UH-34 Seabat – Only needed for the UH-1H sounds and cockpit – “A Team” Skunkworks (http://cplengineeringllc.com/SFP1/

 
 
Note1: Razbam Skyraiders Vol 2 is worth the money for the cockpit alone – however if you are stuck there is a free A-1H at CombatAce – if you do this the quickest way would be to change the campaigns data.ini and .ini files and replace the A-1HVNAF and A-1JVNAF with A-1H and the skin for the A-1H you want to use. You would then need to change the A-1H_loadout.ini.
 
 
 
Played and tested loads but as ever there may be some issues to resolve somewhere.

Canberra B-57B 1963 LongNose (Pakistan AF) for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
 
 
 
Pakistan was the only real foreign user of the B-57, with 24 B-57Bs and two B-57Cs passed on in 1959 under the US Military Assistance Program. From 1963, they were fitted with the RB-1A "Georgia Peach" all-weather bombing system, giving these machines a longer nose. Some of the Pakistani B-57Bs were also modified to allow them to carry four external tanks, permitting them to conduct strikes deep inside India.
 
Pakistani B-57Bs performed strikes during the 1965 Indo-Pakistani War, flying 167 sorties, with three lost in combat, but as mentioned destroying three IAF Canberras on the ground. They also saw combat in the brief 1971 Indo-Pakistan War, with reports of four or five lost in combat. The Pakistani B-57s remained in service well into the 1980s, being the last of the breed flying in military colors.
 
 
See the installation instructions
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B-57B 1959 Short Nose (Pakistan AF) for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
 
 
Pakistan was the only real foreign user of the B-57, with 24 B-57Bs and two B-57Cs passed on in 1959 under the US Military Assistance Program.
 
Pakistani B-57Bs performed strikes during the 1965 Indo-Pakistani War, flying 167 sorties, with three lost in combat, but as mentioned destroying three IAF Canberras on the ground. They also saw combat in the brief 1971 Indo-Pakistan War, with reports of four or five lost in combat. The Pakistani B-57s remained in service well into the 1980s, being the last of the breed flying in military colors.
 
 
 
Read the installation instructions
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B-57C for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
 
 
Pakistan was the only real foreign user of the B-57, with 24 B-57Bs and two B-57Cs passed on in 1959 under the US Military Assistance Program. From 1963, they were fitted with the RB-1A "Georgia Peach" all-weather bombing system, giving these machines a longer nose. Some of the Pakistani B-57Bs were also modified to allow them to carry four external tanks, permitting them to conduct strikes deep inside India.
 
Pakistani B-57Bs performed strikes during the 1965 Indo-Pakistani War, flying 167 sorties, with three lost in combat, but as mentioned destroying three IAF Canberras on the ground. They also saw combat in the brief 1971 Indo-Pakistan War, with reports of four or five lost in combat. The Pakistani B-57s remained in service well into the 1980s, being the last of the breed flying in military colors.
 
 
Read the Instructions!
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra RB-57E for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
 
Cockpit by Erikgen
New Avionics and camera view by USAFMTL (July 2009)
 
 
The RB-57E was a reconnaissance version that saw combat action from 1963 to 1971 in the Vietnam war for the "Patricia Lynn" project.
 
 
 
 
Read the instructions!
 
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B(I) mk8 for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
 
Special thanks to "Spinners" for tweaking the 3D model to be more like the real Canberra - didn't realise they were so out!
 
Updated for SF 2 series by MigBuster and Spinners (July 2009)
 
Temp Gunpack by Wrench (July 2009)
 
 
 
The B(I) mk8 was derived from the B(I)mk6 and retains the same Engines, fuel load and loadout. The main change was a redesigned nose and offset fighter style canopy - which was put in place due to the targetting difficulties of the B.mk2 fishbowl style canopy.
 
The B.1 Mk8 Interdictor came into service in 1956 with around 69 being built. Other Later variants also used the offset Fighter style canopy.
 
 
 
 
 
Read the install instructions!
 
 
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B(I) mk58 (Indian Air Force) for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
 
Special thanks to "Spinners" for tweaking the 3D model to be more like the real Canberra - didn't realise they were so out!
 
Updated for SF 2 series by MigBuster and Spinners (July 2009)
 
Temp Gunpack by Wrench (July 2009)
 
 
 
The B(I) mk58 was the export version of the B(I) mk8 and retains the same Engines, fuel load and loadout with some cosmetic changes.
 
 
Sixty Five Canberra B(1) 58's were delivered to and flown by the Indian Air Force from 1957 along with eight PR.57 and seven T.4 trainers. Canberras saw combat in the major conflicts (1965, 1971, and 1999). The last IAF Canberra retired in 2007.
 
 
 
Read the Install instructions!
 
 
 
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B.20 (RAAF) for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
B.2 Cockpit with bombardier view by Daniel "Kessselbrut" Himmel
 
Special thanks to "Spinners" for tweaking the 3D model to be more like the real Canberra - didn't realise they were so out!
 
Updated for SF 2 series by MigBuster and Spinners (July 2009)
 
 
 
The B.mk20 was licence built B.mk2 by the Government Aircraft Factories, Melbourne, Australia. It featured an increased fuel capacity thanks to wing fuel tanks and outer wing pylons were also added.
 
The B.mk20 was used by the Australian RAAF between around 1966 and 1971 in conflict during the Vietnam war as part of the US 35th TFW.
 
The version in this pack is the later model with the Avon 109 engines and has outer wing pylons according to pictures ive seen. It is also mentioned that the RAAF could use wingtip racks for extra bombs though not too sure on that.
 
 
 
read the install instructions!!
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B.(I) mk66 for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
 
B.2 Cockpit with bombardier view by Daniel "Kesselbrut" Himmel
 
Special thanks to "Spinners" for tweaking the 3D model to be more like the real Canberra - didn't realise they were so out!
 
Updated for SF 2 series by MigBuster and Spinners (July 2009)
 
Temp gunpack by Wrench (July 2009)
 
 
 
 
 
10 B(I).mk66s were delivered to India in 1970. These were slightly upgraded versions of the RAF B.mk6 and were similar to the B(I) mk6 Interdictor.
 
They are included with the same Avon 109 turbojets and option to carry a gunpack.
 
 
 
Read the install instructions!
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B.2 (West German Luftwaffe) and
Canberra B.2 (Rodesian Air Force) for the "Strike Fighters 2" Series
by Ahmed Junaid Raza
B.2 Cockpit with bombardier view by Daniel "Kesselbrut" Himmel
WGAF skin by Soulfreak
RRAF skin by Michael (Mike1) Riddell
 
 
Special thanks to Spinners for making the 3D model more accurate and making me find some better reference material :)
 
Updated for SF 2 series by MigBuster and Spinners (July 2009)
 
 
 
In 1957 the Royal Rhodesian Air Force ordered 15 B.2s and three T.4s. These were delivered two years later. These were said to have seen action in several regional wars in the area. The version here represents the RRAF from 1971 to 1980. (Rhodesia is now called Zimbabwe)
 
 
In 1961 three ex-RAF Canberras were purchased by Germany for trials and experimental use flying with Erprobungstelle 61 - these were delived in 1966.
 
 
Read the installations!!
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B.2 (RAF) for the "Strike Fighters 2" Series by Ahmed Junaid Raza
 
B.2 Cockpit with bombardier view by Daniel "Kessselbrut" Himmel
 
Special thanks to Spinners for making the 3D model more accurate and making me find some better reference material :)
 
RAF0 skin by Spinners
RAF1 skin by Michael (Mike1) Riddell
 
 
Updated for the SF2 series by MigBuster and Spinners (July 2009)
 
 
 
 
The RAF's first bomber, the Canberra, had a career spanning over 51 years on the front lines. Chief designer W. Petter had just joined the design team at English Electric when work began on the Canberra. He changed the swept wings of the original design to a more unconventional design with the engines part way out on, and embedded in, the wing. The end sections of the wings were broad and square, and two powerful Rolls-Royce Avon engines completed the design. The crew of two sat side-by-side in a pressurized cabin. With good fuel economy, and excellent maneuverability at all altitudes, the EE.A1 was an instant success.
 
The prototype was first flown on May 13, 1949, and was problem-free. The first four prototypes were designated the Canberra B.MK 1, and were intended for use with a radar-assisted bomb aiming system. A delay in this system led to the production of a day bomber prototype, the Canberra B.MK 2, and the first operational aircraft were delivered on May 25, 1951.
 
Around 410 B.mk2s were built for the RAF - some saw action in the 1956 Suez crisis.
 
 
 
Read the instructions!!!
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0

Canberra B-57G for "Strike Fighters 2: Vietnam"
by Ahmed Junaid Raza
 
New Avionics and TV by MiGBuster
USAF2 Tropic Moon skin by MiGBuster
 
READ the instructions - includes how to use the TV/FLIR etc
 
 
 
 
 
16 B-57Bs were converted to B-57G standard and used in Vietnam from 1970 to 1972
flying from Tailand for the Tropic Moon III project, and was a pioneer in laser
guided technology. The B-57G had built in sensors such as a low light TV system,
FLIR, and a laser giudance system. This enabled it to carry 4 x 500lb Laser guided
bombs and self designate targets for them. The 20mm wing cannons were deleted due
to the weight of the LGBs. 4 bombs were also carried in the bomb bay (unconfirmed).
Its mission was to hunt trucks over the notorious Ho Chi Minh Trail.
 
 
 
 
 
Released under Freeware Licensing only: http://forum.combatace.com/index.php?showt...t=0&start=0