Guest MrMudd Posted August 21, 2003 Posted August 21, 2003 Below is an initial copy of the key commands for Lock On. Note this there may not be true with the release version. In fact, there are several commands I plan to change, remove, and add. -Matt CHEATS Alt-P Automatic spin recovery (press to recover from spin state) Alt-S Speed retention toggle Alt-E Easy landings toggle Shift-Keypad Del All missile padlock toggle Alt-Keypad Del Threat missile padlock toggle Shift-X Produce an explosion Alt-V Toggle immortality mode for own plane (doesn't work in network and in protected missions) Shift-I Easy radar mode toggle K Execute “Pugachev’s Cobra” U Setting your plane to the takeoff site on the carrier PROGRAM CONTROL Esc End mission/track Ctrl-Q Take control in the track Shift-Backspace Track edit Replace mode (disable old editing commands) Alt-Backspace Track edit Insert mode (don’t disable old editing commands) Ctrl-S Toggle Sound On or Off Ctrl-0 Begin recording microphone sound in the track Shift-0 End recording microphone sound in the track Alt-0 Record On or Off the place of cursor in the track Ctrl-9 Begin recording subtitle in the track Shift-9 End recording subtitle in the track Ctrl-A Accelerate simulation speed Alt-A Decelerate simulation speed Shift-A Reset normal simulation speed S Toggle Pause/Resume/Launch model time at the mission start. Ctrl-M Chat feature for multi-player network games. Shift-Return Recover human plane in the network games. Alt-J Jump into selected AI plane cockpit or leave current plane cockpit. Ctrl-Backspace Show frame rate Ctrl-O Save a rollback point to the track (in pause mode) – not implemented Print Screen Upload screen shots to ScreenShots folder, numbering them with 0, 1, 2, … FLIGHT CONTROL Down Arrow Nose up Up Arrow Nose down Left Arrow Bank left Right Arrow Bank right Ctrl-. (Period) Trim up Ctrl-; (Semi-colon) Trim down Ctrl-, (Comma) Trim left Ctrl-/ (Slash) Trim right Z Rudder left (in flight), left turn (taxi) X Rudder right (in flight), right turn (taxi) Ctrl-Z Trim left rudder Ctrl-X Trim right rudder H Toggle altitude stabilization mode Shift-M Reset Current Audible Warning Ctrl-L Toggle on-board lights Ctrl-T Cancel Trim Settings Alt-H Radio request to AWACS for bearing and distance to the home airfield Alt-T Radio request to AWACS for bearing and distance to the tanker Shift-+ (Plus) Increase basic pressure of the Altimeter Shift- - (Minus) Decrease basic pressure of the Altimeter Shift-P Power switch THROTTLE CONTROL J Toggle auto-throttle Page Up Increase Throttle in increments Page Down Decrease Throttle in increments Key Pad + (Plus) Increase Throttle smoothly Key Pad - (Minus) Decrease Throttle smoothly Home Engine Start End Engine Stop Change of throttle according to engine With Alt Left engine only With Shift Right engine only MECHANICAL SYSTEMS CONTROL B Toggle airbrake Shift-B Airbrake out Ctrl-B Airbrake in Ctrl-E Eject E Toggle active jamming (requires ECM pods in loadout) F Toggle flaps up/down Shift-F Flaps down to the landing position Ctrl-F Flaps up G Toggle landing gear up/down Ctrl-G Toggle arrestor hook down or up (Note: Su-33 only) Ctrl-C Canopy open/close P Release drogue chute Ctrl-P Toggle folding wings (Note: Su-33 only) Alt-R Jettison fuel tanks W Engage wheel brakes (ground) (Note: Hold down key) T Toggle wingtip smoke R Toggle refueling boom Alt-L Toggle gear light Near/Far/Off NAVIGATION ~ (Tilde) Select next waypoint or airfield A Toggle auto-pilot. If the autopilot is on then the plane tries to fly along the route in the NAV mode or to take the horizontal position in combat modes. 1 Toggle to set Navigation (NAV) modes Alt-C Reset flight clock COMBAT MODES 2 Toggle to set Beyond Visual Range (BVR/DVB) mode 3 Select Close Air Combat – Vertical Scan (CAC/BVB – VS) mode 4 Select Close Air Combat – Bore (CAC/BVB – BORE/STR) mode 5 Select Close Air Combat – Helmet-Mounted TargetDesignator (CAC/BVB – HMTD/SHLEM) mode 6 Select Longitudinal Missile Aiming (LNGT/FIO) mode 7 Select Air-to-ground (GND/ZEMLYA) mode 8 Select Grid (SETKA) mode ~ (Tilde) Cycle through targets (Cycle through targets on MFD in AWACS and Ground Attack Modes) TAB Lock selected target (Turn on tracked target) Ctrl-TAB Turn off tracked target TAB Turn on/off tracked target in Close Air Combat modes Ctrl-H Cycle through Heads Up Display (HUD) intensities WEAPONS D Cycle through weapons selection C Toggle cannon Q Dispense chaff & flare Shift-Q Continuously dispense chaff & flares (until supply is exhausted) Spacebar Fire current weapon Ctrl-V Toggle Salvo mode on or off Shift-C Change rate of fire for the gun of A-10 V Increase the ripple interval for A-10 Shift-V Decrease the ripple interval for A-10 Ctrl-Space Change the ripple quantity for A-10 Alt-Space Switch the master arm for A-10 Shift-Space Change the release mode for A-10 Shift-R Change the RWR mode for A10 RADAR & ELECTRO-OPTICAL SYSTEMS I Toggle radar illumination on or off Alt-I Switch between RWS/TWS modes for F-15 radar O Toggle Electro-Optical System (EOS) on or off Ctrl-I Center radar antenna/Infra-Red Scan and Track(ISRT) ball - (Minus) Multi-Functional Display (MFD) zoom in + (Plus) Multi-Functional Display zoom out Ctrl-+ Increase radar antenna azimuth limit for F-15 radar Ctrl-- Decrease radar antenna azimuth limit for F-15 radar BEYOND VISUAL RANGE MODE Shift-; (Semicolon) Move radar/EOS scan zone UP Shift-, (Comma) Move radar/EOS scan zone LEFT Shift-. (Period) Move radar/EOS scan zone DOWN Shift-/ (Slash) Move radar/EOS scan zone RIGHT ; (Semicolon) Move HUD target designator Box DOWN (BVR only) , (Comma) Move HUD target designator Box LEFT (BVR only) . (Period) Move HUD target designator Box UP (BVR only) / (Slash) Move HUD target designator Box RIGHT (BVR only) CLOSE AIR COMBAT MODE Shift-; (Semicolon) Move radar/EOS scan zone UP Shift-, (Comma) Move radar/EOS scan zone LEFT Shift-. (Period) Move radar/EOS scan zone DOWN Shift-/ (Slash) Move radar/EOS scan zone RIGHT WINGMAN COMMANDS Del Dispatch wingman on mission. On mission completion, join up Ins Toggle tight formation or loose formation [ Attack my target ] Cover my six o’clock (rear) position Call wingman commands dialog VIEW SELECTION F1 Cockpit View Ctrl-F1 Natural Head Movement View Alt-F1 HUD Only View F2 External View – All Aircraft & Parachutist Shift-F2 Aircraft labels toggle F3 Fly-By View Ctrl-F3 Fly-By Jump View (saving current camera position) F4 Chase View F5 Air Combat View (Cycles through locked enemy planes around the current plane from nearest to farthest. Looks at the enemy plane from the current plane and shows enemy data in the info string. Refreshes locking at every switch.) F6 Weapons View Ctrl-F6 Chase Weapon View (“Weapon To Target” View) Shift-F6 Launched missiles labels toggle F7 Active Ground Objects View F8 Target View F9 Ship View Alt-F9 Landing Signal Officer (LSO) View Shift-F9 Ships and ground units labels toggle F10 Theater View Shift-F10 Object labels toggle F11 Tower & Terrain View Ctrl-F11 Switches to Tower & Terrain View saving current view position (freezing camera position). When switching from Theater View (F10) the current F11 camera position comes from the F10 camera position, but it’s altitude does not exceed 20km. F12 Static Objects View Ctrl-F12 Civilian transport VIEW MODIFIERS Ctrl-Home Places external views to Friendly only Ctrl-End Places external views to Enemy only Ctrl-Delete Places external views to All Keypad Del Toggle Padlock View (Note: for F1, F2, F6, F7, F8, F9, Alt-F9 LSO View & F11 Tower View only) Ctrl-Keypad Del Toggle Terrain Point Padlock View (Note: for F2, F6, F7, F8, F9 Views only) Backspace Toggle “From object/To object” camera direction mode (Note: for F2, F6, F7, F8, F9, F12 Views only) Alt-Delete Exclude current object from the view switching Alt-Insert Include all excluded objects to the view switching Ctrl-PageUp Reverse objects switching direction Ctrl-PageDown Forward objects switching direction Ctrl Key Pad +(plus) Switch to Weapons Release and Track View for F1 Cockpit, F2 External, F4 Chase, F7 Active Ground Targets, and F9 Ship Views. Switches to ANY weapon now, not to bombs&missiles only! Alt-Key Pad * Starts moving camera forward (F11Tower & Terrain View only) Alt-Key Pad / Starts moving camera backward (F11Tower & Terrain View only) Key Pad 5 Stops moving camera (F11 Tower & Terrain View) Ctrl-Key Pad 5 Returns to Tower & Terrain View starting point or ends Padlock View Y External View Information Display Cycle Toggle Alt-Y Earth Coordinates Units Toggle (Degrees/Meters) Alt-Backspace Replace video edit mode toggle (default) Shift-Backspace Insert video edit mode toggle (replace mode on by default) Shift-J External camera jiggle toggle Shift-Esc Toggle local/object camera rotation mode for F2, F4, F6, F7, F8, F9 and F12 views. COCKPIT VIEW CONTROL Key Pad 1 Move head down and left Key Pad 2 Move head down Key Pad 3 Move head down and right Key Pad 4 Move head left Key Pad 5 Centers camera or stops padlock view Key Pad 6 Move head right Key Pad 7 Move head up and left Key Pad 8 Move head up Key Pad 9 Move head up and right Key Pad Del Enters padlock view and cycle through targets Ctrl Key Pad +(plus) Switch to Weapons Release and Track View for F1 Cockpit, F2 External, F4 Chase, F7 Active Ground Targets, and F9 Ship Views. Switches to ANY weapon now, not to bombs&missiles only! L Toggle Cockpit Illumination M Move head to view right mirror N Move head to view right mirror Key Pad * (Asterisk) Zoom in (narrow view angle). With Shift – Zoom in to limit Key Pad / (Divide) Zoom out (enlarge view angle). With Shift – Zoom out to limit Key Pad Enter Set default zoom (default view angle). Key Pad 0 Jump to cockpit panel snap view and back (Note: Hold down then release)Hold down Key Pad 0 and press Key Pad 1-9 to jump around different instruments with close-up view. Ctrl - Key Pad 0 Cockpit panel snap view mode toggle. Don’t hold down. Then press Key Pad 1-9 to jump around different instruments with close-up view. Press Ctrl - Key Pad 0 once more to return to normal mode. Alt - Key Pad 0 Save current camera position for the last cockpit snap view, corresponding to Key Pad 0 - 9. May be different for different planes! All new custom camera snap positions will be saved in the mission_file_name.xml file and then will always be used for that mission/track in future. Ctrl – Right Shift Fast cockpit mouse speed Alt – Right Shift Slow cockpit mouse speed Shift – Right Shift Normal cockpit mouse speed Ctrl – Left Shift Fast cockpit keyboard speed Alt – Left Shift Slow cockpit keyboard speed Shift – Left Shift Normal cockpit keyboard speed EXTERNAL VIEW CONTROL Key Pad 1 Rotate viewpoint down and left Key Pad 2 Rotate viewpoint down Key Pad 3 Rotate viewpoint down and right Key Pad 4 Rotate viewpoint left Key Pad 5 Centers view (stops F11 viewpoint moving) Ctrl-Key Pad 5 Returns to starting point (F11 Tower & Terrain View only) Key Pad 6 Rotate viewpoint right Key Pad 7 Rotate viewpoint up and left Key Pad 8 Rotate viewpoint up Key Pad 9 Rotate viewpoint up and right Key Pad * (Asterisk) Move viewpoint forward Key Pad / (Slash) Move viewpoint back Ctrl-Key Pad * (Asterisk) Zoom in (narrow view angle). Ctrl-Key Pad / (Divide) Zoom out (enlarge view angle). Ctrl-Key Pad Enter Set default zoom (default view angle). Key Pad 0 Jump to cockpit panel view and back (Note: Hold down then release) Hold down Key Pad 0 and press KeyPad 1-9 to jump around different instruments with close-up view. Shift-(all view keys) Moves viewpoints at a faster rate (Note: Hold down Shift and view key) Ctrl-(Key Pad 1-9) Moves camera instead of rotate it. Matt "Wags" Wagner Producer / Ubi Soft Entertainment IL-2 Forgotten Battles Lock On: Modern Air Combat Quote
Nesher Posted August 22, 2003 Posted August 22, 2003 great job and wonderful idea to publish it even if it could be changed in the future 10x Quote
TPN_Bard Posted August 24, 2003 Posted August 24, 2003 wifey... programming hotas... wifey... programming hotas. ah well, i'll see how much i can get done ;) Quote
savagkc Posted August 27, 2003 Posted August 27, 2003 Well, I'm glad you all didn't go overboard with the controls!!!!!!!!!!!!!! :shock: :shock: :shock: :shock: savagkc Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.