Jump to content
Sign in to follow this  
Spinners

Thunderstreak FGA.1 - RAF Middle East Command

Recommended Posts

Thunderstreak FGA.1 - RAF Middle East Command


Republic Aviation Thunderstreak FGA.1 for STRIKE FIGHTERS 1

This is a 'what if' Thunderstreak FGA.1 with markings for No.20 squadron in a Desert Camo by whiteknight06604.
 
Regarding the Thunderstreak in RAF service then there is no backstory but perhaps the UK needed some muscle when the Supermarine Swift started going pear-shaped!


INSTRUCTIONS

1. From the AIRCRAFT folder drag and drop the THUNDERSTREAKFGA1 folder into your Aircraft folder.

2. From the DECALS folder drag and drop the THUNDERSTREAKFGA1 folder into your main Decals folder.

Please note that I've simplified things by using the stock F-105 tanks.


CREDITS

Special thanks to the guys listed below - great work and especially the flight model!

Thanks to whiteknight06604 for the Desert Camo.

Thanks to Third Wire for the continuous improvement of a great little game/sim.

And thanks to everyone in the wider Third Wire community.

Regards

Spinners

Version 2 - 30/12/13


 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By Spinners


      View File [Fictional] RAF SEPECAT Jaguar FGR.3
      SEPECAT Jaguar FGR.3 for STRIKE FIGHTERS 2
      This is a simple mod of the excellent 'The Mirage Factory' Jaguar GR.1 to give a 'what if' Jaguar FGR.3 tactical fighter with markings for No.45 and No.58 squadrons of No.38 Group, RAF Strike Command. This revision now also includes a desert camo skin for No.112 squadron and uses a revised 3D model.

      BACKSTORY
      In 1974 a cancelled export order for 50 Jaguar Internationals left the SEPECAT consortium with a headache as many 'long lead' items had already been ordered and assembly was already underway on the first 12 airframes. At this time the RAF were keen to order more Jaguars to form a second wing of No.38 Group, RAF Strike Command and, with the delays in the Tornado production programme meaning a shortage of work at BAC's Warton factory,  BAC pushed the Labour government into accepting a deal for all 50 aircraft. Some consideration was given to standardising the aircraft to match the RAF's GR.1 force but the uprated Adour engines and different avionics saw the aircraft confusingly designated as the Jaguar FGR.3.
      Entering service in early 1977 the Jaguar FGR.3's served with No.45 and No.58 squadrons as part of No.38 Group and also with a reformed No.112 Squadron detached to RAF Near East Air Force. The FGR.3's uprated Adour engines and early introduction of overwing missile rails made them something of an elite element within the RAF's Jaguar force and they were deployed to many hot-spots around the world until their somewhat premature retirement in 2002.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the JaguarFGR3 folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the JaguarFGR3 folder into your Decals folder.
      3. Empty the contents of the WEAPONS folder into your Weapons folder
      4. Empty the contents of the PILOTS folder into your main Pilots folder.
      5. From the SOUNDS folder drag and drop the Adour sound file into your Sounds folder.
      That's it!

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Massive thanks to everyone at 'The Mirage Factory' (RIP Oli).
      Special thanks to sundowner for both skins used in this revised upload and also for his permission to use his revised LOD with built-in drop tanks.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 2 - 23/08/2020
       
      Submitter Spinners Submitted 11/28/2009 Category What If Hangar  
    • By Spinners
      SEPECAT Jaguar FGR.3 for STRIKE FIGHTERS 2
      This is a simple mod of the excellent 'The Mirage Factory' Jaguar GR.1 to give a 'what if' Jaguar FGR.3 tactical fighter with markings for No.45 and No.58 squadrons of No.38 Group, RAF Strike Command. This revision now also includes a desert camo skin for No.112 squadron and uses a revised 3D model.

      BACKSTORY
      In 1974 a cancelled export order for 50 Jaguar Internationals left the SEPECAT consortium with a headache as many 'long lead' items had already been ordered and assembly was already underway on the first 12 airframes. At this time the RAF were keen to order more Jaguars to form a second wing of No.38 Group, RAF Strike Command and, with the delays in the Tornado production programme meaning a shortage of work at BAC's Warton factory,  BAC pushed the Labour government into accepting a deal for all 50 aircraft. Some consideration was given to standardising the aircraft to match the RAF's GR.1 force but the uprated Adour engines and different avionics saw the aircraft confusingly designated as the Jaguar FGR.3.
      Entering service in early 1977 the Jaguar FGR.3's served with No.45 and No.58 squadrons as part of No.38 Group and also with a reformed No.112 Squadron detached to RAF Near East Air Force. The FGR.3's uprated Adour engines and early introduction of overwing missile rails made them something of an elite element within the RAF's Jaguar force and they were deployed to many hot-spots around the world until their somewhat premature retirement in 2002.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the JaguarFGR3 folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the JaguarFGR3 folder into your Decals folder.
      3. Empty the contents of the WEAPONS folder into your Weapons folder
      4. Empty the contents of the PILOTS folder into your main Pilots folder.
      5. From the SOUNDS folder drag and drop the Adour sound file into your Sounds folder.
      That's it!

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Massive thanks to everyone at 'The Mirage Factory' (RIP Oli).
      Special thanks to sundowner for both skins used in this revised upload and also for his permission to use his revised LOD with built-in drop tanks.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 2 - 23/08/2020
       
    • By Spinners


      View File [Fictional] Hawker Hurricane Mk.1 'Yankee Squadron'
      Hawker Hurricane Mk.1 'Yankee Squadron' for STRIKE FIGHTERS 2 
      This is a simple mod of Raven's early Hawker Hurricane Mk.1 to create a fictional Hurricane Mk.1 in service with 'Yankee Squadron' of the Spanish Republican Air Force in the 1938-1939 timeline.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the Hurricane1spr folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the Hurricane1spr folder into your Decals folder.
      That's it!
      Please note that the nation name has been set to 'SPAIN' and you should amend this to suit your install and preferences.

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Special thanks to Raven for his awesome work on the Hawker Hurricane in all it's forms and for generously including his templates.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - 04/07/2020
      Submitter Spinners Submitted 07/04/2020 Category What If Hangar  
    • By Spinners
      Hawker Hurricane Mk.1 'Yankee Squadron' for STRIKE FIGHTERS 2 
      This is a simple mod of Raven's early Hawker Hurricane Mk.1 to create a fictional Hurricane Mk.1 in service with 'Yankee Squadron' of the Spanish Republican Air Force in the 1938-1939 timeline.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the Hurricane1spr folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the Hurricane1spr folder into your Decals folder.
      That's it!
      Please note that the nation name has been set to 'SPAIN' and you should amend this to suit your install and preferences.

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Special thanks to Raven for his awesome work on the Hawker Hurricane in all it's forms and for generously including his templates.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - 04/07/2020
    • By Spinners


      View File [Fictional] Sukhoi Su-24P 'Fencer' for SF2
      Sukhoi Su-24P for STRIKE FIGHTERS 2 
      This is a simple mod of Veltro2K's Su-24 'Fencer' to create a fictional Su-24P in service with the Republic of Paran Air Force in the 1980-2020 timeline. 
      Please note that this Su-24P is released 'as is' (in response to a request) and it really needs some additional work on loadouts and the skin. In addition, the 3D model unfortunately has some 'rope' issues so you might want to turn shadows off.

      INSTRUCTIONS
      1. From the AIRCRAFT folder drag and drop the Su-24P folder into your Aircraft folder.
      2. From the DECALS folder drag and drop the Su-24P folder into your Decals folder.
      3. From the WEAPONS folder drag and drop the PTB-3000P folder into your Weapons folder.
      That's it!

      CREDITS
      As always, thanks to Third Wire for a great little game/sim.
      Special thanks to Veltro2K for bringing so many cool aircraft to Strike Fighters including this one.
      And, finally, thanks to everyone in the wider Third Wire community.
      Regards 
      Spinners
      Version 1 - 28/06/2020
       
       
       
      Submitter Spinners Submitted 06/28/2020 Category What If Hangar  
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..