+Soulfreak Posted December 3, 2010 Posted December 3, 2010 I just addet Kesselbruts Canberra cockpit to the expansion pack 2 Canberra B.2 & B.6, but all cockpit textures are now white... Has someone an idea what causes this? Quote
+Brain32 Posted December 3, 2010 Posted December 3, 2010 Did you use the pit in other titles before EXP2? Quote
+ravenclaw_007 Posted December 3, 2010 Posted December 3, 2010 (edited) carlo , i dont have any problems the cockpit just works fine maybe check for a typo error for the Canberra2 the engine ThrustAngles and ThrustPosition are wrong so the aircaft spins like gyro on the runway and oil/gas presserure,temp are missing [Engine1] SystemType=JET_ENGINE InputName=THROTTLE_CONTROL EngineID=1 HasAfterburner=FALSE SLThrustDry=28913.4 ThrustAngles=0.0,0.0,0.0 ThrustPosition=-3.10,0.0,0.0 ThrottleRate=0.3 NozzleAnimationID=-1 IdleThrottle=0.100 IdleRPM=0.353 IdleNozzle=0.000 CruiseThrottle=0.600 CruiseRPM=0.712 CruiseNozzle=0.000 MilThrottle=0.900 MilRPM=0.928 MilNozzle=0.000 MaxThrottle=1.000 MaxRPM=1.000 MaxNozzle=0.000 AltitudeTableNumData=26 AltitudeTableDeltaX=609.6 AltitudeTableStartX=0.0 AltitudeTableData=1.000,0.952,0.906,0.860,0.816,0.773,0.731,0.691,0.652,0.614,0.578,0.543,0.509,0.477,0.446,0.416,0.388,0.361,0.335,0.303,0.275,0.249,0.227,0.206,0.187,0.000 DryMachTableNumData=11 DryMachTableDeltaX=0.1 DryMachTableStartX=0.0 DryMachTableData=1.000,0.968,0.952,0.948,0.955,0.975,1.006,1.046,1.098,1.160,0.000 MaxInletTemperature=120.0 TSFCM0=0.850 TSFCM1=1.299 MinFuelFlow=0.02 ExhaustEmitterName=CleanExhaustEmitter ExhaustPosition=-3.10,-4.65,-0.01 FireSuppression=TRUE MinExtentPosition=-2.62,-0.22,-0.27 MaxExtentPosition=-3.59, 1.57, 0.70 GasTempMaxRPM=650.0 GasTempIdleRPM=450.0 GasTempChangeRate=5.0 OverheatTemp=800.0 DamageTempDelta=300.0 OilPressMaxRPM=38.0 OilPressIdleRPM=28.0 OilPressChangeRate=0.4 LowOilPress=12.0 LowOilTempDelta=400.0 [Engine2] SystemType=JET_ENGINE InputName=THROTTLE_CONTROL EngineID=2 HasAfterburner=FALSE SLThrustDry=28913.4 ThrustAngles=0.0,0.0,0.0 ThrustPosition=3.10,0.0,0.0 ThrottleRate=0.3 NozzleAnimationID=-1 IdleThrottle=0.100 IdleRPM=0.353 IdleNozzle=0.000 CruiseThrottle=0.600 CruiseRPM=0.712 CruiseNozzle=0.000 MilThrottle=0.900 MilRPM=0.928 MilNozzle=0.000 MaxThrottle=1.000 MaxRPM=1.000 MaxNozzle=0.000 AltitudeTableNumData=26 AltitudeTableDeltaX=609.6 AltitudeTableStartX=0.0 AltitudeTableData=1.000,0.952,0.906,0.860,0.816,0.773,0.731,0.691,0.652,0.614,0.578,0.543,0.509,0.477,0.446,0.416,0.388,0.361,0.335,0.303,0.275,0.249,0.227,0.206,0.187,0.000 DryMachTableNumData=11 DryMachTableDeltaX=0.1 DryMachTableStartX=0.0 DryMachTableData=1.000,0.968,0.952,0.948,0.955,0.975,1.006,1.046,1.098,1.160,0.000 MaxInletTemperature=120.0 TSFCM0=0.850 TSFCM1=1.299 MinFuelFlow=0.02 ExhaustEmitterName=CleanExhaustEmitter ExhaustPosition=3.10,-4.65,-0.01 FireSuppression=TRUE MinExtentPosition= 2.62,-0.22,-0.27 MaxExtentPosition= 3.59, 1.57, 0.70 GasTempMaxRPM=650.0 GasTempIdleRPM=450.0 GasTempChangeRate=5.0 OverheatTemp=800.0 DamageTempDelta=300.0 OilPressMaxRPM=38.0 OilPressIdleRPM=28.0 OilPressChangeRate=0.4 LowOilPress=12.0 LowOilTempDelta=400.0 Edited December 3, 2010 by ravenclaw_007 Quote
Wrench Posted December 3, 2010 Posted December 3, 2010 that's the first thing I noticed ... the Canberras doing donuts on the runway! Funnier than all get out!. Haven't tested the 6 or 20 yet, but I'll wager they do the same thing Glad you found the fix!! wrench kevin stein Quote
+ravenclaw_007 Posted December 3, 2010 Posted December 3, 2010 (edited) it is only the B.2 the other two behave normal but the temp and pressure settings are still missing on the other two Edited December 3, 2010 by ravenclaw_007 Quote
+Soulfreak Posted December 3, 2010 Author Posted December 3, 2010 Fixed it. There was something wrong with the correct ini-names... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.