Wrench Posted December 20, 2010 Posted December 20, 2010 (edited) oops...the title should be "Decal ProB". I'm starting to spell like Dave.... ---------- As one can see in the attached screenies, on the left side, the tail band/code is perfect. Whislt on the right, the 'hump' dont get no color! Below is an excerpt from the decals ini ... I can't see any reason why it don't show. X/Y are the same, facing is correct... Ideas? [Decal010] MeshName=vertical_stabilizer DecalLevel=0 DecalFacing=RIGHT FilenameFormat=EF-4c\67thTFS\D\TAILR Position=-5.05,1.2 Rotation=0.0 Scale=5.25 DecalMaxLOD=3 [Decal011] MeshName=vertical_stabilizer DecalLevel=0 DecalFacing=LEFT FilenameFormat=EF-4c\67thTFS\D\TAILL Position=-5.05,1.2 Rotation=0.0 Scale=5.25 DecalMaxLOD=3 [Decal012] MeshName=rudder DecalLevel=0 DecalFacing=RIGHT FilenameFormat=EF-4c\67thTFS\D\TAILR Position=-5.05,1.2 Rotation=0.0 Scale=5.25 DecalMaxLOD=3 [Decal013] MeshName=rudder DecalLevel=0 DecalFacing=LEFT FilenameFormat=EF-4c\67thTFS\D\TAILL Position=-5.05,1.2 Rotation=0.0 Scale=5.25 DecalMaxLOD=3 all the mesh names seem to be correct. Taken right from the stock F-4C_67 decals ini!!! (shoot, even the decal itself is a reworked original F4 tail!) Hell, I even finally got the ER-142 in it's correct place after 7 years!! The other alternative, would be to get ahold of a template for it, and paint the thing on, which I don't want to do in case someone decides to do up the Euro based units. (easier to make a new decal, than a whole skin map! TIA! wrench kevin stein Edited December 20, 2010 by Wrench attempted spelling correction Quote
+daddyairplanes Posted December 20, 2010 Posted December 20, 2010 (edited) I am working on all Phantom users post vietnam using similar logic (all refer to a F4_Black folder for Euro 1 and SEA Wraparound) and have the exact same prob. i keep thinkin about mppd's Loran F-4D's in the gen 1 d/l section they have blister "covers" for that area but i haven't tried it out yet. to busy renumbering my Phantom decals every time a new patch or NF4+ patch comes out:grin: still nice to know i'm not a complete idiot on why i cant get that to look right nice Wild Weasel IV btw only other user i recall is the 81st TFW up until they upgraded to the F-4G, maybe a couple at George AFB for training Edited December 20, 2010 by daddyairplanes Quote
+hgbn Posted December 20, 2010 Posted December 20, 2010 Are you using the same decal for both sides Kevin? Quote
Wrench Posted December 20, 2010 Author Posted December 20, 2010 no, there's a right and a left (TailR, TailL) wrench kevin stein Quote
+ChampionsVA56 Posted December 21, 2010 Posted December 21, 2010 what is that blister? I found a mesh called rwr_tail .........I'm not a F-4 expert....so its a shot in the dark for me. Quote
Wrench Posted December 21, 2010 Author Posted December 21, 2010 (edited) hoot! looks like Champ found it! AND .. found us a new bug!! here's a stock C_67, with the stock decal. Does the same thing as mine also had to get rid of the ER142 .. noticed the little 'antena' bits on the tail were 18 in BELOW the tailcone, and the pylon section was all kinds off. Well, I tried! wrench kevin stein Edited December 21, 2010 by Wrench Quote
+daddyairplanes Posted December 21, 2010 Posted December 21, 2010 (edited) 1 hows that rwr_tail mesh fit in on the decal.ini? and 2 anyone told Dave so he can add this to the bug list 3 having looked at the skins for the 'C_67 it has the rwr antenea on the brake chute housing in back stock. if your using antenea for the ER-142 why not use the stock ones instead. if that is stock then time to ask WTF Edited December 21, 2010 by daddyairplanes Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.