Afterburner Effect Improvement

[Eagle114th 664]

Hello everyone, I have decided to start modding SF2 by altering and improving afterburner for both default aircraft and add-on aircraft for SF2 series. What motivated me was when I installed Sr-71A Blackbird add-on aircraft for SF2, I realized that there are no afterburner for that Sr-71A, it lead me into researching about how afterburner effect work in SF2. That is when I realized I could change or replace an existing afterburner with new afterburner effect, so I swapped Afterburner with new effect from mod pack for SF2, then I re-sized and position it right into engine of both Sr-71A's exhaust pipe from their engines. This is my result of my first time doing basic effect modding:

 

 

 

 

And now I have a goal, learn how to crate my own afterburner from stretch as first step before doing any further modding. Is there any programs that any of you would highly recommend me to install for effect development for SF2? That is where I need advices from experienced modders of SF2. If any of you want me to upload updated Sr-71_DATA.ini (I will only upload Sr-71_DATA.ini, not model of Sr-71, in order, to respect Capun team's policy), I am willing to upload these updated data.ini so anyone can enjoy these new effects.

 

 

Chaoic out...

[Eagle114th 664]

This is first my attempt to improve an existing Tu-22 afterburner effects, after altering/changing/enhancing tga files from combo effect pack for SF2 (by Ryan Crierie "MKSheppard") for now, until I learn how to create my own afterburner texture. (I still am awaiting for advices from mdoders about which software is best for creating texture/effects).

 

This is original Strike Fighter 2 Tu-22B Blinder-A afterburner:

 

 

Picture of Tu-22M taking off where it revealed the color of afterburner:

 

(Source: http://www.airliners.net/photo/Russia---Air/Tupolev-Tu-22M-3/1789764/L/)

 

 

This is improved, new afterburner of Tu-22B Blinder-A:

 

 

 

Chaoic out...

[turkeydriver 4]

The best effect would be one that calculates burner plume length by speed-IE MiG-25 at Mach 1.5 or above has 100 foot long burner plume at night, which brings me to my second point. On most aircraft, the burner plume isnt all that visible during the day unless its cloudy. Some engines, like the F-110 burn hotter than a standard F-100 so the color is diferent-F-110s being mostly deep Orange/red to bluish purple at night. F-100s are yellowish during the day to whitish blue at night. This is a debated topic but we all know there is no standard burner plume that is the same throughout.

The best thing i would like to see is a plume based on speed-I wanna see a 50 foot plume coming out of my F-14 when I buzz the carrier at mach 1.07 in the late afternoon. Anyone know of a mod that does this?

[Silverbolt 104]

nice modifications, however...keep in mind that Tu-22 Blinder and Tu-22M Backfire are two completely different aircraft...there is a backfire hosted @CA , its usin an F-15 Afterburner IIRC, you could do the changes on it !

[Eagle114th 664]

nice modifications, however...keep in mind that Tu-22 Blinder and Tu-22M Backfire are two completely different aircraft...there is a backfire hosted @CA , its usin an F-15 Afterburner IIRC, you could do the changes on it !

 

That is true, and the reason why I did these afterburner improvement to Tu-22 is because I have notice that modern bomber of Russian, such as Tu-22M and Tu-160 creates blue afterburner during take off. And I am still searching for Tu-22 pictures or videos of afterburner, so for now, I thought I would change their engine to match these engine colors as my practice and experience gaining of doing afterburner improvement.

 

And oh, I will certainly check these Tu-22M add-on mod for SF2 and when I do effect improvement, I will post screenshot here.

 

 

Eagle out...

[Eagle114th 664]

The best effect would be one that calculates burner plume length by speed-IE MiG-25 at Mach 1.5 or above has 100 foot long burner plume at night, which brings me to my second point. On most aircraft, the burner plume isnt all that visible during the day unless its cloudy. Some engines, like the F-110 burn hotter than a standard F-100 so the color is diferent-F-110s being mostly deep Orange/red to bluish purple at night. F-100s are yellowish during the day to whitish blue at night. This is a debated topic but we all know there is no standard burner plume that is the same throughout.

The best thing i would like to see is a plume based on speed-I wanna see a 50 foot plume coming out of my F-14 when I buzz the carrier at mach 1.07 in the late afternoon. Anyone know of a mod that does this?

 

There is no mods that I know of that would do these new special effects of F-14 afterburner doing that. That is exactly why I am learning how to work on afterburner in first place. It is my goal to improve afterburner effects to give SF2 more immerse experiences. But I am doing it in small steps a time, merging my time with university. The first step I ever did was adding a new effect into SR-71A and I achieved that. The next is to create new afterburner based on existing .TGA file and change color/tweak glowing setting on .tga picture itself where I used them for Tu-22 afterburner effect. Now the next thing I will be doing is learn how to tweak afterburner properties through .ini dancing and I am still seeking for tutorial on these effect .ini editing. After I mastered that, I will try my best to figure out how to make afterburner glowing more intensively at night and make afterburner go longer based on speed.

 

Your comments about how afterburners work based on speed and day/night/cloudy is interesting and helpful to me for my plans for afterburner improvement work.

 

 

 

Chaoic out...

[Eagle114th 664]

New update on my new afterburner improvement.

 

Tu-22 Afterburner at night

 

 

 

 

 

 

 

New F-105Ds afterburners (replaced default purple afterburner with different afterburner)

 

(Source: http://upload.wikimedia.org/wikipedia/commons/c/cb/F-105_Thunderchief_left_rear_view.jpg)

 

 

 

 

Eagle out...

Edited February 8, 2011 by Eagle114th

[+76.IAP-Blackbird 3,557]

Looks great, will oyu release an afterburner pack?

[+Soulfreak 6,524]

The F-105 effect looks pretty nice!

[+PureBlue 71]

Nice exploration topic Eagle, keep going please

[Eagle114th 664]

I am currently exploring more about how Afterburner work in SF2. Default F-16 afterburner look too weak in graphic and doesn't look much like real F-16 afterburner (Please keep in mind, I am very thankful for great SF2 series simulation with hard works done by TK and his team. It is my great goal to improve his simulation into greater level with new effects.). So I have decided to improve F-16A afterburner, and this is default F-16A Afterburner:

 

 

 

 

(Source: http://www.fas.org/m...afterburner.jpg)

 

 

This is new Afterburner for F-16A, and this new afterburner still have much more room for further improvement. I am working on figuring out how to create a longer version of this afterburner in length and decrease their glowing light range for outside area of afterburner before doing any further improvements.

 

(Source: http://www.kbvp.com/...por.preview.jpg)

 

 

(Source: http://farm2.static...._80518d77da.jpg)

 

 

 

 

 

 

 

Eagle out...

Edited February 9, 2011 by Eagle114th

[Eagle114th 664]

It look like I have managed to figure out how to do 2 things:

 

1) scale the length of afterburner (Still adjusting afterburner and is not even done yet)

2) Make afterburner go longer based on speed!

 

I still need to adjust the proper light from engine because, from what I have seen in several sources (videos and picture), even from intense glowing afterburner, it doesn't give much light outside of jet afterburner, so i will reduce the 'light range" that afterburner product while increasing the 'intensive' amount of glowing inside afterburner during night.

 

Here is screenshots of my further progress on F-16's new afterburner and please note the speed at lower left corner:

 

 

 

 

 

 

Eagle out...

[+hi ho silver 179]

Hi eagle have you seen this mod i did some years ago http://combatace.com/files/file/4926-f-16-f-15-and-mig-29-afterburner-mod/ im working on updating it to sf2 standards

[Eagle114th 664]

hi ho silver, check your PM.

 

 

 

Eagle out...

[Eagle114th 664]

I have spend alot of time polishing afterburner and their node effects for both F-16A and Tu-22. This is the result of latest progress on F-16A and Tu-22 Afterburner and afterburner node effects:

 

 

 

 

 

 

 

 

 

 

 

I will start working on F-15A and other aircraft next, and I have learned alot about how these effects works, I am having fun experimenting different codes in .ini flies and materials for afterburner effects.

 

 

Eagle out...

Edited February 11, 2011 by Eagle114th

[+76.IAP-Blackbird 3,557]

I have some Tu-22 mods on my WIP list, this effect is a very welcomed addition. Could I implement the Tu-22 effect in my addons? Have created a Tu-22U/UD/K/KD and some more version.

[Eagle114th 664]

Blackbird,

 

check your PM!

 

 

 

Eagle out...

 

[+hi ho silver 179]

Just a quick update tu-22 blue and f-18 purple working