+Spectre8750 Posted May 4, 2011 Posted May 4, 2011 View File VF- 51, VF-11,VF-121 Skins and INI Pack for F-11F-1 Tiger 08-18-2011 Spectre8750 VF-51 "Screaming Eagles" VF-111 "Sundowners" VF-121 "Pacemakers" Skins and INI's for Grumman F11F-1/F-11A Tiger For any Strike Fighters 2 Series. ================================================================ ====== Design and development The F11F (F-11) Tiger origins can be traced back to a privately funded 1952 Grumman concept to modernize the F9F-6/7 Cougar by implementing the area rule and other advances. This Grumman company project was known as the G-98, and by the end had departed totally from the Cougar. ================================================================ ====== Included in This Mod: The F-11F-1 updated for SF2, Fuel Tank. Adjusted Flight Model DATA.INI. Working Canopy. Use SHIFT+1 NAVYNM2 Pilot. Skins using TW Number Decals. Uses F-100A_58_pit Cockpit. Carrier Rated. Added Burner Effect. Fixed to look Stock. New Afterburner Effect. Added .DDS Damage Textures. New Loadout, Hangar and Loading Screens. Added Ejection Seat Mod. I think it was Migbusters Mod. All INI's Not Included in This Mod: F11F-1.LOD - Grab this file from Wrenches or Column5's F11F-1 Mod. ================================================================ ====== Role Fighter aircraft Manufacturer Grumman First flight 30 July 1954 Introduced 1956 Retired 1961 (Carrier) 1967 (Training) 1969 (Blue Angels) Status Phased out of service Primary user United States Navy Produced 1954-1959 Number built 200 Variants Grumman F11F Super Tiger Specifications (F11F-1/F-11A) General characteristics Crew: 1 Length: 46 ft 11 in (14.3 m) Wingspan: 31 ft 7.5 in (9.6 m) Height: 13 ft 3 in (4.0 m) Wing area: 250 ft² (23 m²) Empty weight: 13,810 lb (6,277 kg) Loaded weight: 21,035 lb (9,561 kg) Max takeoff weight: 23,459 lb (10,663 kg) Powerplant: 1 × Wright J65-W-18 turbojet Dry thrust: 7,400 lbf (32.9 kN) Thrust with afterburner: 10,500 lbf (46.7 kN) Performance Maximum speed: Mach 1.1 (727 mph, 1,170 km/h) at 35,000 ft (11,000 m) Cruise speed: 577 mph (929 km/h) Range: 1,275 mi (1,110 nmi, 2,050 km) Service ceiling: 49,000 ft (14,900 m) Rate of climb: 16,300 ft/min (83 m/s) Wing loading: 84 lb/ft² (411 kg/m²) Thrust/weight: 0.50 Armament: Guns: 4 × 20 mm (.79 in) Colt Mk 12 cannon, 125 rounds per gun Hardpoints: 4 with a capacity of - and provisions to carry combinations of: Rockets: Aero 6A or Aero 7A "Rocket Package" Missiles: AIM-9 Sidewinder Other: 150 gal drop tank ================================================================ ====== Original by: F11F-1 Team: 3D Model: Fleet-Defender Texture Mapping: BPAO Additional 3D: Crab_02 Orig Skin: Marcello Drop Tanks: Crab_02 Flight Model: Column5 Special thanks to: Sony Tuckson ================================================================ ====== To Install: Just Run the Installer and point it to the SF2 Series Mod of your Choice and drop the F11F-1.LOD in with the aircraft. Have Fun Spectre8750 Submitter Spectre8750 Submitted 05/04/2011 Category F-11 Quote
+Wrench Posted May 4, 2011 Posted May 4, 2011 how is this different from my recently released pak, other than the new ABs and (finally!) working canopy? Not poking or anything, just curious! like the new skins!!! wrench kevin stein Quote
+Spectre8750 Posted May 4, 2011 Author Posted May 4, 2011 (edited) Thanks Wrench afterburner thrust adjusted different afterburner effect landing gear set to more realistic setting different cockpit rudder max control rate set back 128.0 AN/APG-30 radar frequency sdded adjusted cruise speed MachLimitDry added empty mass adjusted enertia adjusted CGPosition=0.00,0.40,0.00 CockpitCGOffset=TRUE other minor things like landing light adjusted afterburner effect changed.... Edited May 4, 2011 by Spectre8750 Quote
+Coupi Posted August 20, 2011 Posted August 20, 2011 Hi, I like this Grumman feline... Many many thanks!!! Coupi. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.