+Trotski 857 Posted November 16, 2018 Hi looking for a pointer in the right direction , on one of our older aircraft, I am messing around with Borts Farmans, specifically the MF11 , as that is really the only shorthorn you can do anything with, as the gunners on the other ones are ancient, and rather awful looking these days, however as the MF11 is just like the Longhorn, I was attempting to remove the obseerver from the rear seat and have an armed observer using the rifle armed models ( as has be made possible on the MF 7 ) however as the bugger is hardwired in, I am experiencing some difficulty in hiding it, I can make the face disappear but the main body aint budging, so i am getting this problem................................... As you can see I still have the shadow of the original observer behind my replacement , so, my question is , can I hide this , and if so, how ? been trying to hide it all different ways but with no luck, as I said I can make his face disappear, but not the main part of him ......HELP !!! Share this post Link to post Share on other sites
+Stephen1918 1,473 Posted November 17, 2018 Removing a part from a plane Basically, you are telling the game that a certain part represents the destroyed version of another part. So it doesn't show until the part is destroyed. Then you assign it to a part that doesn't exist, so that part never gets destroyed so the part you named never shows. Use Mue's LOD viewer to find the name of the part. Any parts attached to this part (indented beneath it in the list) will also be removed. Create a component under [AircraftData] - make sure its numbered correctly Create a component definition and make up a name for the fictitious part Add the name of the part you want to remove Example: This removes the gunner from the DFW, but leaves the machine gun. If you want to remove the gun, then the DestroyedNodeName should be Tailgun_Stand [AircraftData] EmptyMass=1027.0 EmptyInertia=2483.3,3916.1,5536.5 ReferenceArea=41.52 ReferenceSpan=13.27 ReferenceChord=1.68 CGPosition=0.00,0.00,0.00 OnGroundPitchAngle=14.0 UseMetricUnit=TRUE DefaultArmorType=WOOD DefaultArmorThickness=25 Component[001]=Fuselage Component[002]=TopWingLeft Component[003]=TopWingRight Component[004]=TopWingMidLeft Component[005]=TopWingMidRight Component[006]=TopWingTipLeft Component[007]=TopWingTipRight Component[008]=BottomWingLeft Component[009]=BottomWingRight Component[010]=BottomWingMidLeft Component[011]=BottomWingMidRight Component[012]=BottomWingTipLeft Component[013]=BottomWingTipRight Component[014]=Tail Component[015]=LeftStab Component[016]=RightStab Component[017]=VertTail Component[018]=Nose Component[019]=Remove <-- Add component [Remove] <-- Component name must match ModelNodename=Empty <-- this can be any word you want DestroyedNodeName=gunner <-- this is the name of the part you want to remove DetachWhenDestroyed=TRUE HasAeroCoefficients=FALSE 3 1 Share this post Link to post Share on other sites
+Trotski 857 Posted November 17, 2018 oooh ok....will look at this later on in the morning, I sort of did what you say here, but not as you have put it, I'll give it a go and see what happens, if I am still stuck I'll give you a shout.............just wish it was possible to sort out the gunners on the other MF 11's , as they are quite frankly awful , but it's a little beyond my understanding and expertise, be nice to have some up to date early longhorn/shorthorn Farmans . Share this post Link to post Share on other sites
+Trotski 857 Posted November 17, 2018 Thanks mate !! finally done it, simple when you know how it should be done properly and not by guess work !! Thanks again....................... 1 Share this post Link to post Share on other sites
+whiteknight06604 934 Posted November 18, 2018 I know time is a premium for our modders but it might be a worthwhile at some point to have a new nascel made for these old planes. maybe just make a couple versions slightly larger than the original that could be placed vis the fake pilot method. 1 Share this post Link to post Share on other sites
+Trotski 857 Posted November 18, 2018 Totally agree mate for the early war and Palestine where older types stayed in service longer it would be nice to see, and Borts Farmans are ok, but they need an update , and some of the older 2 seaters which have the original FE 1 Gunners in are really ugly looking now , well past their sell by date me thinks !! 1 Share this post Link to post Share on other sites
+Stephen1918 1,473 Posted November 22, 2018 On 11/17/2018 at 7:48 PM, whiteknight06604 said: I know time is a premium for our modders but it might be a worthwhile at some point to have a new nascel made for these old planes. maybe just make a couple versions slightly larger than the original that could be placed vis the fake pilot method. I tried making new nacelles for the old Farmans once and the result wasn't much better than the original. It had to be quite large to cover all the bumps in the original, and I couldn't get the edges around the cockpit and engine to match. Laton made a Savoia Pomilio SP.3 for Italy that is a good stand-in for the shorthorn, and has skins that are easier to work with. https://combatace.com/files/file/4661-savoia-pomilio-sp3/ Share this post Link to post Share on other sites
+whiteknight06604 934 Posted November 22, 2018 I figured it wasn’t as easy as it sounded in my head. Hope you and your family have a happy thanksgiving Share this post Link to post Share on other sites
+gterl 1,204 Posted December 28, 2018 Thx a lot...even I have figured how to do it :-) 1 Share this post Link to post Share on other sites
+Cliff7600 1,148 Posted July 28, 2023 Just my 2 cents : Component[019]=Remove <-- Add component [Remove] <-- Component name must match ModelNodename=Empty <-- this can be any word you want DestroyedNodeName=gunner <-- this is the name of the part you want to remove DetachWhenDestroyed=TRUE HasAeroCoefficients=FALSE MassFraction=0.0 <-- You must add this line If you don't add the "MassFraction=0.0" entry the remaining weight will be shared with the part you added. And if the fuselage part (most of the time) doesn't have a "MassFraction=" entry, there is weight to allocate. Share this post Link to post Share on other sites