Jump to content
Sign in to follow this  
33LIMA

Hat in the Ring!

Recommended Posts

A new campaign with the 94th Aero in France!

Shot06-17-21-23-42-21

I don't really have the system as yet for the latest version of Wings over Flanders Fields but I was inspired to start this campaign after seeing some of BladeMeister's screenies of the Nieuport 28 in a certain other new sim, over on SmHQ. I've always liked the N.28 ever since making the newly-issued Revell 1/72 kit back in the 1960s. I'm no big fan of SPADs so I decided to start with the 94th Aero 'Hat in the Ring' Squadron in late March 1918, before the SPADs arrived.

We're based at Villeneuve les Vertus near Reims, which latter is behind the Lines to our north. I'm leading a patrol of four. We're new to this game and are starting out by getting used to the area, and to combat flying in general, well behind the front. So I'm not really expecting too much to happen today.

94-aero-mission-1

 Here I am, ready to start up.

Shot06-17-21-23-31-28

And there are the boys, shortly after doing so,  engine smoke blowing away in the propwash. As well as my foursome, A' Flight is putting up a pair of Nieuports to patrol the same general area.

Shot06-17-21-23-32-25

As befits the flight leader, I'm first off the ground, into clear blue skies.

Shot06-17-21-23-33-03

Time for a quick look at my map, I think.

Shot06-17-21-23-33-18

Then up and away we go again.

Shot06-17-21-23-33-43

 I throttle back slightly and begin a gentle right turn to help the boys catch up.

Shot06-17-21-23-34-37

Shot06-17-21-23-36-21

I reckon that's Epernay, down there. If not, then I've wasted no time in getting us lost.

Shot06-17-21-23-37-36

Right, now for the boring bit, the long climb for height, before the patrol really begins.

...to be continued!

  • Like 1

Share this post


Link to post
Share on other sites

Right on, thanks for sharing! I love flying with the 94th Aero. Hopefully this flight won't stay boring for too long!

Cheer's

Share this post


Link to post
Share on other sites

I've never yet been able to live long enough to transition onto Spads when flying the N28 in WoFF.

Tried it in RoF and managed to survive well into the Spad period with the 94th,  :pilotfly:

Share this post


Link to post
Share on other sites

Yes, that can only be Epernay down there. Definitely not lost. That's always good to know.

Shot06-17-21-23-43-45

At about ten thousand feet I'm getting a bit blasé if not yet actually bored, so I decide to short-circuit all the wheeling around to gain height. Instead, I climb as we head for the next waypoint, which will take us over our airfield.

Lovely, elegant little aeroplane, the Nieuport 28. Much nicer-looking than the angular SPAD. I can understand why some US pursuit squadrons were reluctant to be re-equipped with the S.13 and its unreliable geared engine. Urban legend or not, I read somewhere that French esadrilles who had it, retained a full, parallel complement of S.7s, just to enable them consistently to put enough aircraft into the air.

Shot06-17-21-23-44-18

Looking down at our base as we pass above, I realise with a shock that this patrol isn't going to be a milk run, after all. White bursts of friendly AA fire are tracking enemy aircraft headed for Villeneuve les Vertus!

Shot06-17-21-23-53-50

I throttle back and spiral down, careful not to over-stress my machine, prone as its upper wing is to shedding fabric along its leading edge. By now the first bombs have fallen on our field. These Huns have no intention of letting the new kids on the block ease themselves into the war!

Shot06-17-21-23-54-25

There's a sort of staccato barking sound and at first I think it's rounds whacking into my aircraft. But there's no bad guys in sight, so it looks like I haven't treated my mount gingerly enough. She's a bit wobbly as I level off and race after the enemy, who are now running north for the Lines and safety.

Shot06-17-21-23-57-12

I hear the rattle of MGs behind me. It was all clear there a second ago! Now there are Nieuports and Albatros scouts whirling around in a small but intense dogfight.

Shot06-17-21-23-57-24

It looks like the others have their hands full and it'll be up to me to pay back the Hun bombers in kind. I'm soon closing on the nearest of two pairs, from below and behind. Soon now, soon!

Shot06-17-21-23-58-21

...to be continued!

Edited by 33LIMA

Share this post


Link to post
Share on other sites

As I get closer I shove down the nose and build up speed. The plan is to pull up into an attack from well out of the observer's field of fire. The biplane tail reveals the Hun to be a Hannover escort and ground-attack type.

Shot06-17-21-23-59-27

Up we go and I start shooting.  And hitting, as I can see from smoke and flying fragments. There doesn't seem to be any return fire...

Shot06-17-21-23-59-35

...despite my climb gradually taking me up behind him.

Shot06-18-21-00-00-08

As I break left to avoid a collision then snake back to the right for another pass, I can see the observer is tracking me with his gun. However, he doesn't seem to be getting off any shots.

Shot06-18-21-00-00-28

My next pass from astern gets more hits and the Hannover begins a gentle turn to the right.

Shot06-18-21-00-00-46

I keep closing and firing, in short bursts. Suddenly, the Hun's wings fall off. The fuselage rolls right and pitches sharply downwards...

Shot06-18-21-00-01-31

...then bursts into flames. No doubt about that one, a dramatic first victory on my first operational flight!

Shot06-18-21-00-01-44

Out of habit I call up the map and the clock, noting time and location for a combat report when back at base. West of Epernay, 08:47. Nobody wants to miss out on being credited with their first success!

Shot06-18-21-00-01-51

But I've ammo left and there are still Huns out there, so I'm not done yet!

...to be continued!

Edited by 33LIMA

Share this post


Link to post
Share on other sites

There's another pair of (presumably) Hun 2-seaters up ahead and I race after them in my Nieuport, which is still wobbling slightly after my tight spiral dive earlier on.

Shot06-18-21-00-03-20

My engine's still running normally, though. A quick look behind to clear my tail...

Shot06-18-21-00-03-32

...then I'm in range and shooting at the nearest Hun.

Shot06-18-21-00-04-37

This time, they are two-bay biplanes not the single-bay Hannovers. DFWs, I think. I'm hitting steadily but this time, take some in return.

Shot06-18-21-00-04-51

The big Hun suddenly dips nose down and falls away.

Shot06-18-21-00-05-26

Got him! I pull up hard to avoid fire from his companion, ahead and right.

Shot06-18-21-00-05-31

Having got well out of range, I bank right and go for the other DFW. Do I have enough round left? There's one way to find out!

Shot06-18-21-00-05-42

...to be continued!

Edited by 33LIMA

Share this post


Link to post
Share on other sites

I'm soon attacking the second DFW. My rounds are knocking sundry small pieces off him and he banks right in an effort to escape. I take some hits in return.

Shot06-18-21-00-06-46

Just when I think I've got him, my guns stop. Trying to clear them doesn't work. I'm almost certainly out of ammo. So I break down and left, keen not to become the one who gets shot down.

Shot06-18-21-00-06-55

My engine is now running rough as I make a run for it, turning and diving for base.

Shot06-18-21-00-07-17

But the Hun doesn't seem to want to let me go!

Shot06-18-21-00-07-04

After a few scary seconds, the DFW clears off.

Shot06-18-21-00-07-37

Which is just as well, for now, my engine conks out altogether.

Shot06-18-21-00-08-10

Right - now I just need to find somewhere to force land. Can't be that difficult, eh?

...to be continued!

Edited by 33LIMA

Share this post


Link to post
Share on other sites

Now then...there are some woods to my right, but on the other side, plenty of promising fields and I have more than enough height to reach them.

Shot06-18-21-00-08-37

Better avoid the ploughed fields, methinks. Those grassy ones over there look good.

Shot06-18-21-00-09-33

The undulations in the land become a bit more evident as I settle onto a final approach, but I reckon I'm still doing fine.

Shot06-18-21-00-10-01

Suddenly, a fence comes into view! Fences and WoFF aircraft don't mix too well, I remember. I can't get down short of the darned thing so try to keep the nose up and get over it. But I just haven't got the airspeed!

Shot06-18-21-00-10-12

Crunch! The fence stops me dead lie a fly in a spiderweb.

Shot06-18-21-00-10-21

'Dead' is the operative word, for the debriefing tells me I've been killed! WoFF's lethal fences have claimed another victim! Granted I had only just touched down and was travelling quite fast, but an animation showing my kite flipping over or breaking up would have been at least more convincing.

That was probably my shortest-ever WoFF career! Next time, I'll be more careful where I force land!

Edited by 33LIMA
  • Like 2

Share this post


Link to post
Share on other sites

In WoFF, the fences would always kill you if you hit one... now it's not always the case after a patch changed that behaviour.

Sometimes you can get away with it, and sometimes you can't...

  • Like 1

Share this post


Link to post
Share on other sites

Nice write-ups Lima, interesting to see a version of WOFF before I began WOFFing. By the way, fences are deadly to about version 4.18 of WOFF (UE). The 4.21 or 4.22 patch that disables SweetFX compatibility also tones down fence (and tree) deadliness. The PE addon (ver. 5.0.x) included a few other subtleties regarding trees and fences, which are continued in the BH&H2 edition. I spend most of my time in my backport of PE aircraft/terrains into 4.18 since I prefer SweetFX color saturation in WOFF to what ReShade can do (ReShade is really the only option after the ver. 4.21 patch) - and I keep a stiff upper lip when crashing into trees or fences. :biggrin:

Happy flying,

Von S

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By VonS
      Hello fellow WOFFers,
      Thought I’d open this separate thread for a future mods-compatibility list for the ver. of BH&H 2 (WOFF) that will be released soon. Becker is welcome to make use of this thread for his long mods-compatibility list that is currently hosted on the WOFF threads over on SimHQ. I will also use this thread to update regarding my FM mods., GPU Tuner Patch, etc., in the future and time-permitting.
      For convenience and simplicity, I encourage everyone who is a member/user of CombatAce to post mods-related questions for BH&H 2 WOFF under this thread, since it will be easier to find mod-compatibility info. that way. While most WOFF-related mods. are available via Sandbagger’s site for WOFF addons, this thread will hopefully prove helpful for compatibility questions, info. regarding release of new mods. not hosted on Sandbagger’s site, etc. - and ideally will become a centralized hub for mod-related topics since there are too many mod-related threads over on the SimHQ forums for WOFF and it becomes confusing/discouraging to navigate for new WOFF fliers who might wish to load up quickly on WOFF goodies and fly.
      OBD, feel free to delete this thread if you will be posting a separate stickied thread for mod-compatibility questions, etc.
      For those interested in downloading my FM tweaks packages for the Ultimate and Platinum Eds. of WOFF, as well as GPU Tuner Patches for the Platinum Ed., including for WOTR Phase One, and the small FM tweaks package for WOTR Phase One - please see the link included immediately below. Those WOFF-related packages are not compatible with the latest, BH&H 2 edition unless otherwise indicated in this thread. I am currently busy with work and other duties, so my limited modding time will be devoted only to First Eagles 2 for the foreseeable future.
      Tweaks Packages for Previous Eds. of WOFF, etc.
      EDIT: to find my previous and current mods packages for WoFF/WoTR, click on my propeller icon here on CombatAce to go to my main profile page. Once there, click on the "about me" tab to find all relevant info. and mod download link(s).
      Cheers all,
      Von S 
    • By Kodokushi
      I created a deck to use with the Matric Android app to control WINGS OVER FLANDERS FIELDS: BETWEEN HEAVEN & HELL II.
      Intro
      I'm so new to the game that I still don't know just what I don't know about playing it I have a little bit of flight sim experience in the past but having recently read the remarkable book Marked for Death  byJames Hamilton-Patterson I used google to learn more about WWI flight, found WOFF and jumped in running. I've never been fond of using a keyboard to enter sim commands I'm grateful for this forum, it's been instrumental in helping me get started, my thanks to everyone who has contributed. I'm not affiliated with Matric app in any way, I'm just a guy trying to figure things out The Matric App
      Their Website http://matricapp.com/ All edits are done on the desktop app that is a free download  The mobile app communicates with this desktop app to work with your game (Or photo editor, videos, music, etc. etc. Matric is useful beyond gaming) Google Play Store on Android phone or tablet to get the mobile app.  Cost for the app is scaled based on what you can either afford or how much you value it ranging from $12.99 to $19.99 you choose how much you  pay. I use a Kindle Fire tablet that I found a work around to get the Play Store on How I use Matric in WOFF
      I set up my deck to have everything I didn't have set up already on other devices (you may see buttons you don't need or need more but this is easily editable)  I use SmoothTrack Face Tracking App on my Android phone with Opentrack on my computer so I didn't need the eye movement commands As an aside, I have tried many setups and this is the best inexpensive solution I have found for face tracking I had trouble with my VKB Gladiator NXT Joystick so I pulled an old Logitech Extreme 30 Pro joystick out and started using it.  I think the Gladiator issues are related to some setup I was doing for IL2 and not related to WOFF, I will dedicate the time later to getting it going in WOFF but the Logitech works fine for now. the Logitech has a few commands on it, these are not on my Deck I changed a handful of commands while playing around with setup, please be aware if you download my deck that the following are not standard WOFF commands: Fixed Views Toggle Control+NumberPad5 Select Next Weapon Conrol+NumberPad2 Right Rudder Trim Control+NumberPad6 Left Rudder Trim Control+NumberPad4 Increase Time Compression Control+Semicolon Quality Control If you find an error in my deck, please share it here, I haven't even pushed every button in game yet. Future Plans
      I expect my decks to change quite a bit as I learn. Some buttons will be removed, some changed in look or groupings.  Dedicated decks built for given plane types that have identical or very similar commands, removing commands that do not apply to those planes Move buttons that are needed to access quickly (Combat) in sizing and location to fit my needs as I learn I already have Blip button and unjam guns at the edge of the screen and large in anticipation of needing them quicker I can see moving or copying the Wingman commands to the Weapon and Combat page to access them in the heat of battle without changing pages Decks for realistic flying without any navigation buttons, just the bare basics after I get competent Add maps as pages to decks, they will not be scrollable, but multiple pages that are static maps (images) can be added.  Area around landing field for sure As much of the engagement area as possible as additional pages I hope that some of you here use Matric and contribute your work so that I can implement your improvements into my own setup. If there is another option for this type of tablet based game control that is inexpensive I'd love to hear your experience. For now I can't think of anything that would make me change but I try to keep an open eye as to what is out there. Get my Deck for Free if you have Matric
      Kodokushi WOFF BHAH2 Flanders Field 1.1.2022 Deck • Matric (matricapp.com) Or seach 'Kodokushi' from the desktop Matric app  I plan to date my decks as I update them and will try to keep on top of removing the older decks if they seem obsolete compared to newer efforts  




    • By BuckeyeBob
      Hello, gents. Although I prefer to keep discussion of the OCM to my thread at simhq for now, I have several pics of work in progress I would like to post, and combatace.com is much friendlier with images than the other site, so I thought I would post them here. Keep in mind that these are all works in progress and may or may not show up in the mod. Of course, all questions and comments are welcome. Overall, I am making progress on the mod and hope to have something by the middle of next month or so.
      ALL PICS ARE WORKS IN PROGRESS
      Old light haze

       
      New light haze

       
      Old thick haze

       
      New thick haze

       
      New Fog

       
      Let me know what you like and don't like about the pics. The main obstacle to getting any of these new clouds into the sim is the flashing issue. Although I have been able to reduce it some, no matter how I try, I can't seem to completely eliminate it, especially for haze and fog clouds. That's why you see so few of these clouds in vanilla BHaH2. However, I haven't given up hope yet!
      Cheers!
    • By VonS
      INSTALLING WOFF BHAH 2 IN (CLASSIC) WINESKIN ON A MAC AND/OR THEN TRANSPLANTING THE ENTIRE INSTALL TO WINDOWS 10 BOOTCAMP (info. added May 3, 2021)   Directions below should be followed, first to install WOFF BH&H 2 in WineSkin on a Mac, and then (optionally) to transplant the OBDSoftware\WOFF folder to Windows 10 in Bootcamp. This will allow for a BH&H 2 install to co-exist with previous WOFF installs in Windows, and also makes use of the same settings/keys file, to minimize installation and tweaking hassle for us Mac-heads.   The steps below assume that you already have an older version of WOFF running in WineSkin on your Mac - because such an older install in WineSkin is necessary to have for the full installation, and testing, of BH&H 2, to complete itself (otherwise the install will fail). These steps also assume that you are familiar with the installation steps, instructions, jargon, etc., located under the long WOFF-on-a-Mac post that is available under the WOFF threads on SimHQ.   (Those who do not have a previous version of WOFF installed in classic WineSkin, which is necessary for all of the steps below to be completed, are recommended instead to try either a direct install of BH&H 2 in Win10 on the Bootcamp side/partition of a Mac, or to try installing BH&H 2 into newer WINE wrappers available via the unofficial and newer WineSkin fork available at https://github.com/Gcenx/WineskinServer.)   STEP ONE: go to https://sourceforge.net/projects/wineskin/ and download the latest classic, wineskin winery (ver. 1.7 as of this writing), via the green "download" button there   STEP TWO: double-click on the program; in the menu that opens click on the plus sign to the left of "new engines available," and in the list that then opens choose WS9Wine1.7.7, download it, and then - when you're back in the main menu - choose "create new blank wrapper" (now wait about 3-4 minutes for your Mac to make the custom wrapper; once finished, the wrapper will be placed in an Applications folder that has been made inside your user folder on OS X and/or macOS)   STEP THREE: double-click on the wrapper once again and choose "install software" in the main menu; then "choose setup executable" in the next window that opens and locate your exe file for WOFF BH&H 2 that you purchased; now let the wrapper do its thing to install the game   STEP FOUR: once installed, the wrapper will go back to the main menu and you can click "quit" (it may also prompt you to locate the program before it drops to the main menu, the program in this case being the exe file of the game that was just installed - best thing at this point is just to leave this alone and close that window, if it doesn't drop to the main menu automatically)   STEP FIVE: once the wrapper has quit, don't double-click on it but "right-click" it and choose the option in the popup menu on OS X and/or macOS that says "show package contents" (this will open the wrapper's folder and should list something like a contents folder, the alias to its c drive, and an app/icon called WineSkin); double-click on the app named WineSkin and you will open the main menu window again, of the wrapper; and choose "advanced"   STEP SIX: under the advanced menu, to the right of the box called Windows EXE (that contains a file path), click on "Browse"; this will open up your finder on OS X and/or macOS, and then you can scroll to your desktop or downloads folder on your Mac; look for the latest patch for WOFF BH&H 2 that you should have downloaded separately, from the official WOFF website, and choose that updater exe installer (click "choose"); then you're back in the WineSkin advanced menu with the proper file path for the update patch's exe now listed in the box near the top of the window; now quit that WineSkin preferences window and go back to the main WineSkin app that you previously created - and then double-click on the main WineSkin app icon so that a window opens and which will allow for an installation of the latest update patch to happen (follow directions that pop up in the relevant window, to install the WOFF BH&H 2 update patch); once the process has completed, quit the main WineSkin program again, if it does not close automatically   STEP SEVEN: right-click on the main WineSkin wrapper once again, choose "show package contents," and then double-click once more on that secondary WineSkin icon/wrapper mentioned in STEP FIVE above; under its "advanced" menu, to the right of the box called Windows EXE (that contains a file path), click on "Browse"; this will open up your finder on OS X and/or macOS, and then you can scroll into the "drive_c" of the wrapper into which you installed WOFF BH&H 2 and then patched it to its latest version; in "drive_c" look for "OBDSoftware\WOFF" and scroll into there, and keep scrolling until you find "WOFF.exe," and choose that (click "choose"); then you're back in the WineSkin advanced menu with the proper file path for the game's exe now listed in the box near the top of the window; now close that secondary WineSkin wrapper window   STEP EIGHT: copy or move the now updated OBDSoftware\WOFF folder that resides in that WineSkin wrapper to your desktop; the WOFF folder is found by right-clicking on the main WineSkin wrapper and choosing "show package contents"; the package is located within the "drive_c" folder, by the way   STEP NINE: now locate the WineSkin wrapper for your earlier edition of WOFF, double-click on it and select "show package contents," and navigate to the relevant "drive_c" directory to locate the OBDSoftware\WOFF folder that corresponds with that older variant of WOFF; rename that folder to something like OBDSoftwareOld\WOFF and move it to your desktop; now copy over, to that location instead, the fresh OBDSoftware\WOFF folder that corresponds with BH&H 2, from your desktop   STEP TEN: copy and replace the OBDSoftware\WOFF\OBDWW1 Over Flanders Fields\campaigns\CampaignData\Pilots folder in your fresh BH&H 2 folder (that should be in the older WineSkin wrapper by now, as explained in the previous step) with the same folder from OBDSoftwareOld\WOFF that is now on your desktop (this is an important step; otherwise, BH&H 2 will not open in WineSkin unless this older Pilots folder transplant is done)   STEP ELEVEN: now close all unnecessary WineSkin windows and double-click the main WineSkin wrapper icon for your earlier edition of WOFF but that now contains the newer OBDSoftware\WOFF folder with the transplanted CampaignData\Pilots folder; allow BH&H 2 to open; recommended is to fly one quick combat mission or one of the other instant missions available, to allow all necessary files to populate successfully in your install; congratulations!, you now have a successful WOFF BH&H 2 install running in (classic) WineSkin; you may now quit WOFF BH&H 2   STEP TWELVE: optional at this point, if you like, is to copy the now functioning and tested WOFF folder that resides in your BH&H 2 WineSkin install (the one located at OBDSoftware\WOFF), to a Windows 10 partition on your Mac, or perhaps to another Mac (or Windows machine) where you already have an older version of WOFF installed; there will be no need to un-install that older version of WOFF that resides in Windows; simply rename that older version to something like WOFF UE or WOFF PE, in order to run BH&H 2; if you want to run the older version of WOFF again, rename the newest WOFF folder to something like WOFF BH2, and the older one simply to WOFF, and the old version then becomes functional; both installs will coexist happily, and will also use the same keys/settings located under AppData\Roaming\OBD_Games\OBDWW1 Over Flanders Fields (recommended, however, is to map extra keys for Lewis gun loading/reloading into the older WOFFKeys.xca file that you have, for full, functional use of that gun in BH&H 2)   NOTES: Don't forget to swap back your older OBDSoftware\WOFF folder into your WineSkin WOFF wrapper, on your Mac, if you will not be running BH&H 2 in WineSkin but only in Windows; or, make a copy of your functional WineSkin install instead, place the older WOFF folder into that wrapper, and enjoy running multiple versions of WOFF that way too, directly in OS X/macOS (recommended is to give the multiple WineSkin wrappers different names, to avoid confusion, if you choose such a setup); no guarantees that the instructions posted above will result in a stable install of WOFF BH&H 2 on your Mac, but there is a fine chance that careful following of the instructions will result in a good install   TIP: I recommend loading my "FrankenBHAH Enhancement Package" in WOFF BH&H 2 on Macs. It is JSGME-friendly and improves FPS via my FrankenMiniTuner, among various other improvements worked on in FrankenWOFF 4.18. Please see the "Read Me" file included in the package for more info. The link to the package is (https://combatace.com/forums/topic/92320-fm-tweaks-for-woffuepe/?tab=comments#comment-783155). Also, if loading Reshade and perhaps my shaders preset file for WOFF, in BH&H 2, recommended is to set NoMultisampling to a value of 1 in the two d3d8 configuration files that are included in the package, located under WOFFScenery\Shaders and OBDWW1 Over Flanders Fields.   ----- ADDENDUM: WOFF BHAH2 BOTTLING (Brief Illustrated Tutorial; info. added May 4, 2021)
      Please find included below some tutorial pics. for how to install/extract WOFF BH&H2 into an empty WineSkin bottler that should first be optimized for WOFF BH&H2 bottling and that runs well on Mac OS X versions 10.5 to 10.12 (for macOS versions 10.13 and higher, recommended instead is to see the unofficial WineSkin port for Macs at https://github.com/Gcenx/WineskinServer). Bottler not supplied for download here; recommended is to make your own either via classic WineSkin, and then to install BH&H2 as specified in the pics. below, or to install/bottle via a newer WineSkin as per the link given immediately above.
      The "BH&H2 Bottler" in my case, on my Mac Mini, has been set to Windows 7 compatibility, with WINE Wrapper version 2.6.2, and WINE Engine WS9WINE1.7.7. No WineTricks have been installed because this wrapper ONLY installs WOFF BH&H2, and individual patches for BH&H2, into ready and transportable form, but does not serve up a functional, running BH&H2 install within the wrapper itself.
      To set up a functional, running install of BH&H2, proceed to look carefully over the final illustrated instruction set provided below, and as well do read over the more thorough installation directions located under this relevant WOFF-on-Mac post (above) or the longer one on SimHQ that also covers installation info. regarding WOFF UE/PE before focusing on BH&H2.
      NOTE: Successful transporting of a functional, running install of BH&H2 onto a Win10 partition on your Mac (should you choose not to run BH&H2 in WineSkin) - requires that you also, already have an older version of WOFF installed on the Win10 partition/drive, since that older version has created the necessary Windows registry files for WOFF, as well as other necessary folders that contain keyboard/joystick customizations for WOFF, etc.
      Happy bottling, transporting, and flying of WOFF BH&H2,
      Von S 
       
      Classic WineSkin Main Window - Use "Install Software" button to install BH&H2 and all relevant update patches

       
      Right-Click Maneuver - After BH&H2 has been installed and patched, right-click and choose "Show Package Contents," to display directories

       
      Navigating to C Drive - Double-click on the "drive_c" alias to enter the c drive main level directory

       
      Locating the "OBDSoftware" Folder - The relevant folder will be located inside the main level, c drive directory (see further explanations provided on the pic.)*

       
      * Recommended is to keep a copy somewhere on your Mac of such a bottled, patched, but non-functional WineSkin wrapper with BH&H2 installed and patched inside it - this way you may patch/update the bottled version whenever new patches come out, and then carefully follow the same procedures as explained in the pic. immediately above this note, in order to be able to fly the latest version of BH&H2 either in WineSkin wrappers or in your Win7/8.1/10 Bootcamp partitions.
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..