Sign in to follow this
Followers
0
.thumb.jpg.59620c8c4aa98fa7c534cd0857dc3574.jpg)
-
Similar Content
-
By Spinners
View File [Fictional] Tupolev Tu-16 'Badger-A' Paran Air Force
Tupolev Tu-16 'Badger-A' for STRIKE FIGHTERS 2
This is a very simple mod of the stock AI Third Wire Tu-16 to give a flyable Tu-16 'Badger' in service with the Empire of Paran Air Force with markings for No.1 Heavy Bomber Brigade.
COCKPIT
There is not really a totally suitable pit for this aircraft so I've decided not to include one but you will be sat in the right place (offset to port) and you will have a gun sight and a ground mapping radar.
INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the Tu-16_Pa folder into your Aircraft folder.
2. From the DECALS folder drag and drop the Tu-16_Pa folder into your Decals folder.
That's it!
FLYING THE BADGER
It's so easy to scrape the tail when taking off so let the Badger 'auto take-off' by setting flaps and full power, release the brakes and the nose will lift at 260kmh and it will lift off the runway soon after. I've had good results by releasing my bombs at 10km away from the target whilst at 6,000m altitude but the Badger will happily cruise at 9,000m and at that height you should release your bombs at about 12km away from the target or just a bit more. Remember that the Badger has a fixed forward-firing 23mm cannon so if your bombs miss the fuel tank then get down nice and low and take it out that way!
To help you land the Badger I've added fake airbrakes which will slow you down enough so it's just a matter of lining up the runway from a fair old distance and making a nice 'greaser' of a landing. It does sometimes help to push the stick forward to overcome the bounciness of the landing gear.
CREDITS
As always, thanks to Third Wire for a great little game/sim.
And, finally, thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 2 - October 22nd, 2023
Submitter Spinners Submitted 09/08/2010 Category What If Hangar
-
By Spinners
Tupolev Tu-16 'Badger-A' for STRIKE FIGHTERS 2
This is a very simple mod of the stock AI Third Wire Tu-16 to give a flyable Tu-16 'Badger' in service with the Empire of Paran Air Force with markings for No.1 Heavy Bomber Brigade.
COCKPIT
There is not really a totally suitable pit for this aircraft so I've decided not to include one but you will be sat in the right place (offset to port) and you will have a gun sight and a ground mapping radar.
INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the Tu-16_Pa folder into your Aircraft folder.
2. From the DECALS folder drag and drop the Tu-16_Pa folder into your Decals folder.
That's it!
FLYING THE BADGER
It's so easy to scrape the tail when taking off so let the Badger 'auto take-off' by setting flaps and full power, release the brakes and the nose will lift at 260kmh and it will lift off the runway soon after. I've had good results by releasing my bombs at 10km away from the target whilst at 6,000m altitude but the Badger will happily cruise at 9,000m and at that height you should release your bombs at about 12km away from the target or just a bit more. Remember that the Badger has a fixed forward-firing 23mm cannon so if your bombs miss the fuel tank then get down nice and low and take it out that way!
To help you land the Badger I've added fake airbrakes which will slow you down enough so it's just a matter of lining up the runway from a fair old distance and making a nice 'greaser' of a landing. It does sometimes help to push the stick forward to overcome the bounciness of the landing gear.
CREDITS
As always, thanks to Third Wire for a great little game/sim.
And, finally, thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 2 - October 22nd, 2023
-
By Spinners
View File [Fictional] Fiat G.55 Centauro for Strike Fighters 2
Fiat G.55 Centauro for STRIKE FIGHTERS 2
This is a simple mod of Veltro2K's Fiat G.55 Centauro to create a fictional Fiat G.55 Centauro in service with the Turkish Air Force in the 1944-1949 timeline. Also included is a Parani Army Air Force skin (in fact, this mod is set up as a Parani aircraft).
INSTRUCTIONS
1. From the AIRCRAFT folder drag and drop the Centauro folder into your Aircraft folder.
2. From the DECALS folder drag and drop the Centauro folder into your Decals folder.
3. From the SOUNDS folder drag and drop the Bf109G folder into your Sounds folder.
4. From the WEAPONS folder drag and drop all three folders into your Weapons folder.
That's it, although you might want to use the WW2 pilot of your choice. Please note that the 3D model has a tiny bit of 'decal bleed' on the port side of the nose.
CREDITS
As always, thanks to Third Wire for a great little game/sim.
Thanks to Veltro2K for making the G.55 Centauro 3D model.
Thanks to Charles for the original skins and also for the flight model.
Thanks to Kesselbrut and Capun for the cockpit.
And, finally, thanks to everyone in the wider Third Wire community.
Regards
Spinners
Version 1 - 24/10/2020
Submitter Spinners Submitted 10/24/2020 Category What If Hangar
-
By torno
View File SU-27K (SU-33)
nstallation of the Sentraedi Fighter SU-27K:
The installation procedure is quite normal,
FACILITY:
This SU-27K (SU-33) package is for an SF2 installation. Simply copy and paste the items from the included folders into the corresponding folders contained in your Saved Games > ThirdWire folder
GRADES:
This is a primitive version of the SU-27K Flanker airborne heavy fighter, it is not optimized for ground attacks but can carry a lot of bombs and rockets
the model is a SU-35 casing that we once worked with ALEDUCAT and it was never finished, the controls were optimized for vector thrust so it doesn't move some ailerons, today I finished it as a Sukhoi 27k to share it.
Create a set of classic double rockets for this model.
the chosen cabin is the one created by YEYEYE, the original readme file is added.
The missiles that I chose are from a pack of weapons, I don't know who created them but it is appreciated.
Hope you enjoy.
By pressing the corresponding vectoring keys (vertical thrust) the plane becomes unstable like the SU-57 model, being able to perform the Cobra maneuver.
I had planned to create the characters of the series but unfortunately every day it becomes more difficult for me to finish projects to be able to share them with you, it would be of great help if you followed me on my youtube channel
https://www.youtube.com/@arielmelo9789/videos
I could justify the time invested in my ex-wife hahahaha.
Submitter torno Submitted 06/05/2023 Category Su-27
-
By torno
nstallation of the Sentraedi Fighter SU-27K:
The installation procedure is quite normal,
FACILITY:
This SU-27K (SU-33) package is for an SF2 installation. Simply copy and paste the items from the included folders into the corresponding folders contained in your Saved Games > ThirdWire folder
GRADES:
This is a primitive version of the SU-27K Flanker airborne heavy fighter, it is not optimized for ground attacks but can carry a lot of bombs and rockets
the model is a SU-35 casing that we once worked with ALEDUCAT and it was never finished, the controls were optimized for vector thrust so it doesn't move some ailerons, today I finished it as a Sukhoi 27k to share it.
Create a set of classic double rockets for this model.
the chosen cabin is the one created by YEYEYE, the original readme file is added.
The missiles that I chose are from a pack of weapons, I don't know who created them but it is appreciated.
Hope you enjoy.
By pressing the corresponding vectoring keys (vertical thrust) the plane becomes unstable like the SU-57 model, being able to perform the Cobra maneuver.
I had planned to create the characters of the series but unfortunately every day it becomes more difficult for me to finish projects to be able to share them with you, it would be of great help if you followed me on my youtube channel
https://www.youtube.com/@arielmelo9789/videos
I could justify the time invested in my ex-wife hahahaha.
-