Wrench

Then, we still need to know WHICH CV, so we can check the movements section of the data ini for the EffectSize= ??? and it's positioning. Silverbolt will be along at some point, hopefully, to enlighten us Wrench kevin stein

I don't remember the specific fix, but I do remember it's discussed in the Typhoon release theard. Might want to have a look in there... Something to do with the groundmapping radar callouts in the avionics ini. Wrench kevin stein

Is there a question here???, as I don't really see one.... Are you asking about the extended lenght of the wake on the OHP, or the lack of one on cruiser?? Be a little more specific, please? Wrench kevin stein

So, methinks we're getting an 108 Rapier. Most interestering.... Wrench kevin stein

So, what you're asking is how to add a pylon, as opposed to a launch rail (which would be part of said pylon) Well, first off, you'd need a pylon to add!! Unfortunately, I don't think there are any. Meaning: a new one would have to be created in MAX, then exported and blahblah and set up as a weapon (or, more likely using the "fake pilot'' method) -- just as used on the MiG-17PFs/PFU, MiG-19P/PM for the missile pylons and radar nose, or the 2nd cockpit as seen on the P-38M mod. If you look at the Paki F-6 Farmer, the Cuban Mig-17AS (and probably a couple others), you'll see that the additional weapons stations are added via ini edits, using an item from Ye Olde BunyPak called "F6" ... these are the pylons that attach to the wings. In the case of the Paki Farmer, the outboard sidewinder rails. (or on the 17AS, outer bomb rack). So, for the final answer, you need someone to CREATE a pylon set, spaced to fit between the drop tanks, and added via the known methods. Adding the weapon stations themselves, as you've done, is a pretty simple matter. Wrench kevin stein

Oi!!! I'll see what I can find ... used to have some stuff around here somewheres.... Wrench kevin stein

Welcome to CombatAce, AFCivilEng! We have amassed a tremendous amount of knowledge in "adjusting" things in this game, and I think the article you seek is located here: http://forum.combatace.com/index.php?showtopic=27492 (this is a new place for it, as I just moved it make it easier for folks to find) Now, mind you, it speaks to some things you might not know how to do yet, so please spend some time reading the threads in the Knowledge Base; it'll help move things along easier (greasing the wheels so to speak) If you can't find something in the KB (and belive me, it happens a LOT!), don't hesitate to ask! Someone is sure to have the answer, or point you to the relevant article Wrench kevin stein

Another easy way is to just change the "CastShadow=" to FALSE. Also eliminates the problem for that single aircraft. WRench kevin stein

Of course I have templates for the Corsair! Look at all my WW2 versions!!! they're 2048x2048, so nicely detailed. I'll get them to you one way or another. Remember, a different "wing" is used for the cockpit view (making for odd views if using anothr camo pattern - which is why LazyBoy wrench went with the blue) Wrench kevin stein

I'll take any help I can get!!! For the FAS Mustangs, I've chosen the SEA 3-tone as seen on the Cavailier 'stangs used by them. Just a bit simplier in excuation. Of course, doing them up in the "COIN" gray is even easier!! Obviously, the Ouragon tanks are "data ini edited" out, and easily remounted Most of the data I've found shows they didn't use them too much, but they were put back on eventually. The photos I've found of the "stored or museaumed" ones all have the tanks. Nobody noticed the wing lights! It's an extra set, just for the wings themselves. Thanks museli! The Ouragon skin is brandy new, from fresh home-made 1024 templates, with all redrawn panel and rivet lines. I even fixed the mapping issue on the lower right alerion (that nobody's noticed for 5 years!!) with a decal cheat! The template WILL be included with the aircraft upload. On the subject of Corsairs, here's qickie shot of the FAS FG-1D (ok, my F4U-1d which is Wolf F4U's) in FAS colors (not camo!! I don't even WANT to try and attempt that weird mottle!! Worse than WW2 Luftwaffe!!! ) Still need serial decals Please notice the 'removed' tail hook, also via data ini edits. And TMF's Corsair (again, my F4U-4 mod of it) in it's complted FAH skin, with serials. Departing Toncontin Airport All these aircraft are 'nationalized' versions, so they won't intefere with any other mods of said aircraft. All will get their own WoE-style hangar screens, too! (that actually takes longer to do up than the cursed decals!!) As to the map itself, I'm unable to add the capitol of El Salvador (sorry Flogger!) BUT!!! on the El Salvadoran side, you'll get Santa Rosa de Lima (city and airport), La Union port. Honduras get Nacome, San Lorenzo (city and airport) and a not-so-accurate coastline for the Gulfo de Fonsecia. I HATE these fracking tiles!!! Wrench kevin stein

2 more for the stable... FAS MD-450 Ouragan (anyone notice anything different with it??? FAH F-86E I'll have to redecal Museli's FAH Sa'ar skins, as I found a complete listing of their serial numbers. Still haven't decieded what to do about the Mustangs... On the "What If" FAN Fishbed, what type of numbers should it have?? And color!! Many are near completion, just needing decals and readme (that's the hardest part, ya know!) Wrench kevin stein

I remember reading the LOTR books in the early/mid 70s....just when there was a resurgence of interest in Tolkien.... but I don't really think the NATO codename folks would be that into fantasy books. (they'd been around since, what? the late 40s/early 50s?) I like the "fish-" idea, as it keeps with it's MiG-21 heritage. I'd go for Fishtail...maybe it has some deficiences in yaw control?? Or due to a small radar antena, the pilot has to keep pivioting side-to-side to get a good sweep??? Just ideas, thrown out there Wrench kevin stein

If this is the 4 Seasons rebuild, I'd sugget re-reading the enclosed readme, that has a nice, simple to understand explination, and what to do on how to correct it. In the "notes and other nonsense' section. This is why we write them.... Wrench kevin stein

Is it safe to assume you're speaking of the Indian Type 96 and/or 96B??? I didn't think they went to "98" Or perhaps the Mig-21-93 Bison??? (not too familiar with that one -- other than it's need new avionce to simulate the HUD). I have an uncompleted version, using the A-4F cockpit and F-15-style avioncs that give you a HUD. But, IIRC, someone's already done something along these lines......old age, I forget things sometimes...hard to keep track of all them pesky Fishbeds... Can you post some screenshots, to help describe the problem? Also, you know there's an update pak for both the 96 and 96B in the Downloads/Aircraft/Mig-21 section that I did in 2007? Brings the bird to atleast the 06 patch level. All the InAF Fishbed need yet another update to their data inis to bring it the 08 levels, but that's a pretty simple matter of data ini copy/paste of the relevant sections into a newly extracted 21mf data ini (IF, as always, one knows what one is doing...) Wrench kevin stein

I wanna know where I can get this comic book.... reminds me of all those old ones I had as a kid in the '60 "Our Fighting Air Force" comes to mind Wrench kevin stein

I LIKE the look of this beast!! NATO designator,huh??? Ok, gotta start with an "F"..... and it has to "not realy make sense" (like the others -c'mon, Fishbed??) I once saw a listing of NATO codename for Soviet equipments... even for stuff that turned out not to be real. I'll see if I can find it again.... EDIT: Ok, found it... I've included the actualy aircraft it was supposed to be used on Faithless (ye-2) Faceplate (ye-230) Flipper (ye-152) Firkin (su-47){obivious, not ready yet} Firefox (PAK-FA) !!!! I didn't include "Fred", as I normally would as a joke, but it seems to have been used on Lend-Lease P-63 Kingcobras!! Wrench kevin stein

If you still want to use the old Bunyap Pak, Option #1 IS the only way to get it working int he Post-Patch World. BUT.... you still won't have weapons for Red Air, as they naming conventions are different from what in the data ini (stock) You'll still need to spend a LOT of time here: http://forum.combatace.com/index.php?showtopic=18346 in our ever-so-conviently provided Knowledge Base WRench kevin stein

So, KB, when you releaseing the SF2 Wep Pak???? You all relaize you just might make me have to spend 20 buck I don't have to get SF2....<sigh> If so, at least I"ll be able to rest the new terrains in it... Wrench kevin stein

That cockpit is NOT available, as it's virtually impossible to import the files as used in Targetware stuff for our use As an alternative, may I suggest this replacement, as seen on my site: http://wrench1smog.com/wrench16.html scroll down about 1/3 of the page to the "Pre-WW2 Aircraft section" Mind you, you'll still need the DATs Guardsman to apply this package too... Wrench kevin stein

File Name: MiG-19s, Iraqi AF Generic Camo File Submitter: Wrench File Submitted: 28 Feb 2009 File Updated: 28 Feb 2009 File Category: Mig-19/J-6/F-6 Farmer Skins MiG-19S/F-6 "Farmer-D" Iraqi Air Force skin and decal set; for SF/WoV/WoE/WoI and probably SF2 This is a new skin for the stock 3rd Wire Mig-19S. I assume it's "representative" of Farmer-D as used during the Iran-Iraq War of the 1980s. Filling a request for one of the CombatAce members. This skin was created using my home-grown 1024x1024 templates, where were based off the original 3W skin maps, resized and with redrawn panel and rivet lines. The camo pattern depicted here is also loosly based off the Syrian AF as seen in WoI. The colors are as close a match as I could make, given the lack of visual information available on the web. Basically, it's a "sand and spinich" as seen in a profile on ACIG. A VERY simple, easy to follow readme is enclosed with REEEEAALLLLYYY easy instructions. Enjoy! Wrench Kevin Stein Click here to download this file

Truth be told, the tiles themselves are FAR from accurate ... right now I'm adding the rivers/river mouths at the Bay of Fonseca, Honduras. The river courses don't come near to being accurate, but they follow the "general lay of the land" (which means, switching back and forth from the "terrain tile view" to the "height field view" to make sure they don't look "odd" in game climping up and down mountain sides). Just to let you know, you can ONLY go striaght or curved (at least with the stock WoV tiles) there is no real way to create a river path that runs 45 deg to the terrain; oh sure, you can have meandering rivers with all the curves, but it's won't be like you see in Google Earth. But, by using the "riverT" in their various incarnations, you get it to follow a general course approx 45-60 deg off the north/south or east/west axis. Expect to do a LOT of testing and retiling! Have a look at the ASW map, ver 2 that I just released, and you can see how I got the Rio Grande to (generally) follow it's south-easterly course. I did create some 'custom' tiles for that ,too. Accuracy? Get it "close enough for government work", following a somewhat known course, and I'm pretty sure most folks won't bitch too much. If they do, tell THEM to learn that cursed TE ... and see HOW they like it!! Wrench kevin stein

and rmemembe, too, that ALL decals MUST be square -- meaning 128 x 128, 512 x 512, etc. Otherwise, they all kinds of screwed up WRench kevin stein

Differences in the type of projectile, me thinks. 7.62 is just a 'slug', 20mm is an explosive round As the the winders, maybe the difference between and annular blast warhead and an expanding rod type?? (you all can look that up at you leisure) Wrench kevin stein

This thread , in our ever-so-handy Knowledge Base, may be of some assistance: http://forum.combatace.com/index.php?showtopic=32706 with pictures too!!! Also, I didn't mention it that thread, but double check the 'compatibility mode' Wrench kevin stein

It has nothing to do with weapons effectivness....all the AFVs are WAAAAYYYY too thin-skinned. Take a look at the armor values of oh, lets say the Abrams in the DS mod. They're a bit more realistic. Even the Bradley is 'upgraded' slightly. Now, considering NONE of our tank guns are firing SABOT rounds; I'm assuming they're just 'standard' HE, I do think that it should be more than one round to killl anything (other than 1940s-early 1970s tanks). I'm also pretty sure the Game Engine ™ isn't taking into account things like sloping armor (ala T-34s and later) It's a pretty easy fix, if you know what to look for (and do the conversions from inches to MMs) Wrench kevin stein