Jump to content

JulioJunqueira

JUNIOR MEMBER
  • Content count

    25
  • Joined

  • Last visited

Files posted by JulioJunqueira

  1. SPAD XIII 138th Aero Sq

    SPAD XIII C1. for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Former "Flag Bus" as was Flown by Major Maxwell Kirby commander of 5th Pursuit Group.Germany, Koblenz late, 1919.
    Major Maxwell Kirby achieved his sole victory, when serving with the 94th Aero squadron.
    When the 94th was returned to the United States, their aircraft went to the 138th AS while still wearing the "showbirds" colours. However the squadron insignia was removed by the pilots of the 94th, and this was replaced with that of the 138th. The emblem of the 138th was the "Charging Ram" within the 'V' signifying the FIFTH PURSUIT GROUP. The 138th Ultimately returned to the USA and disbanded in August-September 1919.
    Many of these aircraft then had a further lease on life then they were transferred to the new Polish Air Service.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "138th Aero Squadron" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "138th Aero Squadron" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=138th Aero Squadron
    Name=138th Aero Squadron
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    19 downloads

       (1 review)

    0 comments

    Submitted

  2. SPAD XIII Flag Bus

    SPAD XIII C1. "Flag Bus" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Captain Reed Chambers of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Captain Reed Chambers achieved 7 confirmed victories in WW1, flying with 94th Aero Squadron. 
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Flag Bus" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Flag Bus" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Flag Bus" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Flag Bus
    Name=Flag Bus
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    15 downloads

       (1 review)

    0 comments

    Submitted

  3. SPAD XIII Barber Pole

    SPAD XIII C1. "Barber Pole" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1 
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Dudley "Red" Outcalt of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Barber Pole" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    This Aircraft flew probablly with Marlin guns, and not with Vickers.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Barber Pole" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Barber Pole" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Barber Pole
    Name=Barber Pole
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000 
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    known issues:
    Painting the stripes in spirals was a problem because at the end of the tail's aircraft, there is a distortion that pulls all the lines back. I connected the stripes with each other as far as was possible; so you may notice imperfections in the bottom side. 
    ________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    16 downloads

       (1 review)

    0 comments

    Submitted

  4. SPAD XIII Little Joe

    SPAD XIII C1. "Little Joe" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Leo H. "Joe" Dawson of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lt. Leo Dawson achieved 4 victories in WW1, flying with 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Little Joe" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    This Aircraft flew probablly with Marlin guns, and not with Vickers.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Little Joe" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Little Joe" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Little Joe
    Name=Little Joe
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    I'm adding another (SPAD13_001.bmp) with the front bottom, painted in full green colour as an option.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    17 downloads

       (1 review)

    0 comments

    Submitted

  5. SPAD XIII Zig-Zag

    SPAD XIII C1. "Zig-Zag" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Ben "Casey" Jones of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Zig-Zag" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Zig-Zag" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Zig-Zag" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Zig Zag
    Name=Zig Zag
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.

    18 downloads

       (1 review)

    0 comments

    Submitted

  6. SPAD XIII Checkerboard

    SPAD XIII C1. "Checkerboard" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1 
    Historical notes:
    This skin depict the SPAD XIII C1. flown by Lieutenant Robert W. Donaldson of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919. Lt. Robert W. Donaldson achieved one shared victory in WW1, flying with the 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Checkerboard" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Checkerboard" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Checkerboard" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Checkerboard
    Name=Checkerboard
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.

    I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder. 
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

     

    18 downloads

       (1 review)

    0 comments

    Submitted

  7. SPAD XIII Diamond Dick

    SPAD XIII C1. "Diamond Dick" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant William H. Palmer of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lt. William W. Palmer achieved 3 victories in WW1, flying with the 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Diamond Dick" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Diamond Dick" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Diamond Dick" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Diamond Dick
    Name=Diamond Dick
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    I'm adding one optional (SPAD13_001.bmp) with a red star painted on the wheels.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

    25 downloads

       (2 reviews)

    0 comments

    Submitted

  8. SPAD XIII Lightning Bolt

    SPAD XIII C1. "Lightning Bolt" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Harvey Weir Cook of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lieutenant Harvey Weir Cook achived 7 confirmed victories in WW1, flying with 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Lightning Bolt" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Lightning Bolt" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Lightning Bolt" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Lightning Bolt
    Name=Lightning Bolt
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000 
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

    20 downloads

       (2 reviews)

    0 comments

    Submitted

  9. SPAD XIII Easter Egg

    SPAD XIII C1. "Easter Egg" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant Samuel Kaye of 94th Aero Squadron. 
    Ft. Alexander, Koblenz, Germany. April of 1919.
    Lieutenant Samuel Kaye achieved 4 victories in WW1, flying with the 94th Aero Squadron.
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
    During the Spring of 1919, "Easter Egg" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Easter Egg" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Easter Egg" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Easter Egg
    Name=Easter Egg
    Nation=USAS
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

    17 downloads

       (2 reviews)

    0 comments

    Submitted

  10. Planning maps for WW2 Europe Terrain for SF2

    PlanningMap for Wrench's EuroWW2 Strike Fighters 2.
    _______________________________________________________________________________________________________________
    I did two versions of the Planning maps for Wrench's "EuroWW2" Terrain usefull for WW2 Strike Fighters 2 installations.
    You will be able to choice between a Grey & blue version and other in colors.
    There is also a optional versions for DAT (A-Team) installations with the two colors choices.  
    _______________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    To install this Map, copy or drop the three JPG figures named "PlanningMap" in your EuroWW2 Terrain folder. 
    _______________________________________________________________________________________________________________
    *ATTENTION*
    First make a backup of your original PlanningMap textures just in case you wish return to it. 
    _______________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira Map Texture
    - Wrench EuroWW2 Terrain. 
    - special thanks to CombatAce.com hosting the files.
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. 
    This file may not in any way, be used in any payware additions.
    _______________________________________________________________________________________________________________

    58 downloads

       (0 reviews)

    0 comments

    Submitted

  11. SPAD XIII Sunbeam

    SPAD XIII C1. "Sumbeam" for First Eagles 2 & 1
    This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
    Historical notes:
    This skin depict the SPAD XIII C1. Flown by Lieutenant John Jeffers of 94th Aero Squadron. Ft. Alexander, Koblenz, Germany. April of 1919.
    Lt. John Jeffers achieved 2 victories in WW1, flying with 94th Aero Squadron. 
    The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Sumbeam" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
    ___________________________________________________________________________________________________________
    INSTALLATION INSTRUCTIONS :
    This skin do not uses decal files, so will be easy install.
    To install this skin and ini file, copy or drop the folder named "Sumbeam" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
    *ATTENTION*
    In order to work properly on your loadout menu option, inside the "Sumbeam" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
    [TextureSetXXX]
    Directory=Sunbeam
    Name=Sunbeam
    Nation=USAS
    Squadron=
    Specular=1.800000
    Glossiness=1.800000
    Reflection=0.000000
    Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
    I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder. 
    ___________________________________________________________________________________________________________
    Credits:
    - Julio Junqueira skin
    - Historical references by Bob Pearson. 
    - Third Wire Productions for the original files that I used as base to my work.
    - special thanks to CombatAce.com hosting the files.
    ___________________________________________________________________________________________________________
    This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 
     

     

    23 downloads

       (2 reviews)

    0 comments

    Submitted

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..