Stephen1918

View File Nieuport 21 The Nieuport 21 was designed to be a long range escort fighter. It used a Nieuport 17 airframe with the smaller Nieuport 11 engine to reduce fuel consumption and extend its range. The lighter weight gave the plane a good climb rate, but the lower power engine reduced its speed. The Nieuport 21 served along with the Nieuport 17 on the Western Front. It was also licensed to the Dux factory in Russia and large numbers were used on the Eastern Front. My version of the Nieuport 21 is armed with a single Lewis gun mounted on the upper wing and has a loadout for eight Le Prieur Rockets for Balloon Busting missions. This package features two skins - one French, one Russian - a set of decals, and a fully functional cockpit. My skinning templates are included with the download. This plane uses the Le Prieur Rockets created by P10ppy and a sound file created by Nixou (included with his Realistic Engine Sounds package). Both of these files are available in the Combat Ace Download section. Both of these files are used by other aircraft, so you may already have them. I have included Nixou's sound file with this package in case you don't already have it. Credits: My thanks to Ojcar for making the data file for the Nieuport 21. My thanks to Nixou for making the sound file for the Le Rhone 80hp engine. Installation instructions: This aircraft uses P10ppy's Le Prieur rockets available in the CombatAce downloads section. You may already have it. If you don't, you'll have to download it and install it into your Weapons folder. For FE1: Unzip the file and move the folder named "Nieuport21" into your FirstEagles/Objects/Aircraft folder. If you don't already have it, copy the file named "LeRhone9c80hp1m4" from my Sounds folder into yours. For FE2: Unzip the file and move the folder named "Nieuport21" into your FirstEagles/Objects/Aircraft folder. Then in your FirstEagles/Objects/Decals folder, create a new folder named "Nieuport21". Move the folder named "D" from the Airplanes/Nieuport21 folder into the Decals/Nieuport21 folder you just made. If you don't already have it, copy the file named "LeRhone9c80hp1m4" from my Sounds folder into yours. Submitter Stephen1918 Submitted 12/05/2021 Category Nieuport  

This is a very cool looking vehicle, thanks for finding this. Since it fires to the rear, it couldn't be used as a tank in First Eagles, but it might be used as a truck or as a static prop. Or maybe for AA...

View File WWI Airfield Vehicles and Objects Four vehicles and other objects that modders can add to airfields using the target.ini. I have made them rather generic so they should be usable for either side, on any front. I have included the data for the types.ini for each object in the download. Vehicles include a Starter Truck, a Fuel Truck, a Utility Truck, and a Staff Car. I have also included an Oil Cart and a grouping of miscellaneous Tools used by the ground crews. Each vehicle has a high and low poly LOD as well as a destroyed version. I have organized everything into folders for convenience, but you'll need to take them out of the folders when you install them. Submitter Stephen1918 Submitted 01/03/2021 Category First Eagles - WWI and Early Years - Object Mods  

By the way - I also uploaded better (smoother) versions of the airfield vehicles I made earlier this year. https://combatace.com/files/file/17512-wwi-airfield-vehicles-and-objects/

Silberpfeil - Good thought, but the gun doesn't elevate high enough to be an AA gun so it's ground targets only.

Nice detail! I'm looking forward to this.

View File Galicia2 This is a completely new version of the Galicia terrain. The new terrain includes new tiles and TODs, adjustments to the height map, many new targets and objects, winter and summer tiles. All necessary ground objects are included in the download. Galicia was the name of a territory in north-eastern Hungary and was the scene of major fighting during the First World War. It was invaded by the Russians early in the war, was recaptured by the Austro-Hungarians later, and invaded by the Russians again even later. This download includes all the ground objects necessary for the Eastern Front. A more complete ReadMe file is included in the download. I have included instructions for updating an existing install or for making a completely new install. Instructions for both FE1 and FE2 are included. New in Version 3 I have made all new farm and city tiles with new TODs. I have made many adjustments to the height map and changed the amount of tree and rough areas. Both summer and winter terrains are included. I have added a lot of detail to the battle fields, including machine gun placements, Austrian infantry units, debris in the battle fields, and more detail in the artillery batteries. I have added a lot of buildings to make the cities more crowded. I repainted the existing building skins and made some new buildings. I have added static aircraft to all the airfields and made many changes to the buildings, objects and other details to increase diversity. I have added about a dozen new airfields, field hospitals, and cavalry camps. I revised many of the ground objects and skins, and made some new ones for this terrain. All necessary ground objects are included in the download. Credits Gerwin's TFD editor was most helpful in making this terrain. I would not have been able to do it without this outstanding utility. I have included many of Geezer's maintenance figures, airfield objects, and AA machine guns in this download. Geezer also made some artillery for this project. Submitter Stephen1918 Submitted 05/12/2015 Category First Eagles - WWI and Early Years - Terrain and Environmental Mods  

Every project goes through a stage where you're just grinding away. Success belongs to the people who can force themselves through it and finish the job instead of switching to another project. Flanders is looking great so far! This may be your most ambitious project yet. Keep plugging away, it's going to be beautiful when it's done.

I have uploaded four vehicles and some other objects that modders can use to populate airfields. I made them generic so they can be used by either side on any front. The download includes destroyed versions for the vehicles and I have included the data needed for the types.ini. for each object.

You have to add the data to the types.ini first, then add the objects individually to the targets.ini. There is a discussion about how this is done somewhere in the SF1 knowledge base. Mue also made a Target Area Editor to simplify this. (Mue's Target Area Editor does not work on my machine so I do it with a text editor.)

Like everyone else who responded, I would also like a new Flanders terrain. I still play FE Gold on a regular basis. I have FE 2, but I rarely use it. I have been working on some airfield terrain objects, I will upload them when they're finished.

I have uploaded two additional versions of the Sopwith Triplane. Ojcar tweaked the FMs of the original Tripe to reflect differences in the planes. The early version has a wider tail plane and a 110hp engine. It's a little more sluggish, especially in the climb, but still a very nimble machine. I have included two skins and my skinning templates. The cockpit is the same as my original Triplane. The dual gun version is a little nose heavy in maneuvers, but still flies well. I have included a skin, with appropriate decals, for the "Black Flight" of the RNAS 10 squadron. I made a new cockpit for this plane.

Here's something else to experiment with - In FE, the gunner is one piece and attached to the gun, so his motion is restricted to keep his legs from poking through the side of the plane. It could be that enemy planes are simply not coming into his field of fire so he doesn't "see" them. In the "Crew" section of the FM, for the [Gunner] you can try changing the Min/Max Pitch and Yaw settings to increase his range of motion, but you might get the gunner intersecting with the plane. You can also try increasing the PitchAngleRate and YawAngleRate to make him move faster. Maybe improving his reaction time will help. Please let us know if any of this helps. Merry Christmas to you too, and everyone at Combat Ace.

I usually start with LOD2, the one you see from about 50-100 meters away in the game. This forces me to focus on the major shapes and proportions before I get into the fine detail. I build the whole plane, start making the skinning templates, get the control surfaces working, then I take it into the game and look at it - from a distance. When I'm satisfied, I save it under a new name and start smoothing the wings, adding details, etc. until the file starts getting too big. The first tail plane you showed is good for LOD2 - You're working on making it smoother, then you're going to have to take detail out again when you start making the LODs. At this point I would move on to the wings, engine, landing gear, etc. and see how it looks with the FE render engine. From my own experience - Don't get distracted by fine detail too soon, or you'll end up having to take it out later - You can see things in 3D Studio that you can't see in the game, so get the plane into the game as soon as you can and only add necessary detail - Trial and ERROR is your friend, sometimes I rebuild the same part two or three times to get it just right - the next plane is always better because I've learned what mistakes not to make.

I personally think the rifleman in the Taube moves kind of goofy. I use Whiteknight's unarmed version in my installs of the game. Nevertheless, if you want to use him, I'll send you a 3DMax file for him. You'll have to adjust his movements in the FM to make him work with the Bleriot.

Swambast, I sent you a PM about this

I've started working on the Sopwith Triplane. I still have a lot of work to do on the skins; I also need to make a cockpit, make the LODs, work on the FM, and do a lot of tweaking. It will be a while before it's finished.

A nice surprise. Thank you. Are you going to upload the skin?

The Bleriot looks promising. I'm not an expert on the plane, but I'll be happy to answer any modeling/rigging questions you may have.

Emld has a very nice Nieuport 28 here: https://combatace.com/files/file/3962-nieuport-28-c1-v102-with-cockpit/ It has a fully functional cockpit and decals. v.Deutschmark also made some skins for it. https://combatace.com/files/file/4197-eddy-rickenbacker’s-n-28/ https://combatace.com/files/file/4196-douglas-campbell-n-28/ It looks like Geezer replaced one LOD in Emld's plane.