MigBuster

Happy Birthday Derk old chap

Happy Birthday to you

One lucky Drone!!!

I believe you can adjust some parameters to get what you want...eventually: jet_cockpit.ini [GunsightFront] HasGunsight=TRUE GunsightMilSize=50 GunsightName=F-16A_sight.tga AGGunsightName=F-16A_AGsight.tga GunsightRollTabsName=F-16A_rolltabs.tga GunsightRangeBarName=F-16A_rangebar.tga RangeBarOrientation=6TO12 RangeBarHasGunRange=TRUE RangeBarUseWeaponRange=FALSE RangeBarMax=6096.0 RangeBarMin=914.4 RangeBarMaxGun=2032.1 RangeBarMinGun=304.8 LeadComputing=TRUE MinLeadRange=300 MaxLeadRange=1300 DefaultLeadRange=500 MaxDepression=245 DefaultDepression=50 jet.ini [FlightControl] ....... GunBoresightAngle=0 RocketBoresightAngle=-3.0

Happy Easter to all

You mean the correct RGB colour code if you were creating a skin for instance?

Its a converted Airbus A330-200 airliner. Replaces the VC-10 and Tristar. They used to use HP Victors until about 1993

Firstly exp2 only works with SF2E so you must have this: 1. SF2V 2. SF2E and Expansion pack 2 If you don't have that suggest you reinstall them - or you will need to provide some screenshots of the install if you are unable to describe it.

The radar is defined in the avionics.ini - and will have associated files in the jets cockpit folder. - so you have matching sets - also check this line in the F-18.ini file - think its still relevant: AvionicsDLL=Avionics70.dll

Happy Birthday WM

Try searching: http://combatace.com/topic/28253-fa-18a-hud-problems-in-woi/page__p__158700__hl__fa-18+%2Bhud__fromsearch__1?do=findComment&comment=158700

Right so you have 2 SEPARATE installs?? 1. SF2V 2. SF2E and Expansion pack 2 OR did you: 1. install SF2V 2. then install SF2E and merged it with SF2V 3. then installed Expansion Pack 2 over the top of these?

Really sad to hear Ed - thanks for all the work you have put in over the years for this series. Heres hoping you can find some work soon

Not clear on this - what games do you have? these: SF2V SF2E SF2E Expansion Pack 2

The original games are single core only - so that's 2,5Ghz PC its running on with a low end graphics card. I suspect you are using the latest patch for FE1 which would have slowed things down a fair bit - you may need to turn graphics settings down - start by turning shadows off and see how you go. Also what are your graphics card AA/AF settings? if they are high turn them down. If still no joy there is a HDR mod on here that should speed things up drastically with dual core and Vista - worked very well in SF1 - not sure if anyone tried it in FE1 though!

You can - the jet just needs to have the same folder name as the stock jet. Suggest you just cut and paste the stick jet folder out. Then you may need to alter each squadron in the campaign files to take account of the different skins or rename some of the skins to stock ones.

Should take about 14 Days I reakon

Happy Birthday

Fantastic work - a great read

You dont need to read the whole guide - just install the aircraft as you would in SF1 (but in the folders here C:\Users\<>\Saved Games\ThirdWire\StrikeFighters2\) - give it a spin and see if anything needs changing. Then go back to the guide if anythings not right. Extracting files is also covered in the SF2 KB in my sig

Welcome back FireHawkOrdy - there is no escape

show off

They normally do 2 models of the carriers - one for taking off that has other a/c on the runway, or one for landing that has other a/c on the catapults. I have asked if they would release a pack with carriers that could be used for both landing and taking off from - so will have to see.

Sorry to hear Rambler - but good to see you have other plans and are not dwelling on the disappointment.

Not familiar with that - is it just one Aircraft type that causes the crash?