104 files
-
Ka-50 USMC HMLA-169 "Vipers" Skin Pack
By HomeFries
Marine Attack Helicopter Squadron (HMA) 169 was commissioned in 1971 as part of Marine Aircraft Group 39 (Camp Pendleton, CA), and unlike most HMLA squadrons began with the Cobra (AH-1G) before becoming a composite squadron. By 1976, the AH-1G was replaced by the AH-1J Sea Cobra, which were eventually replaced by the AH-1T.
In 1986, HMA-169 was redesignated Marine Light Attack Helicopter Squadron (HMLA) 169, and replaced its AH-1Ts with the AH-1W Super Cobra. As a composite squadron, it also received its complement of UH-1N Hueys.
Today HMLA-169 flies the UH-1Y Venom and the AH-1Z Viper.
This is a fictional skin pack of Ka-50 Black Sharks with HMLA-169 markings. There are four different Modexes (USN/USMC side numbers) allowing you to create packages of different aircraft. Each skin has a "normal" version and a weathered version. Weathered skins have a bleached effect as if the aircraft were heavily exposed to the sun for months on end. Normal skins include pilots with green flightsuits, while weathered skins include pilots with desert flightsuits.
Note: this skin pack uses an EXE installer that creates common texture folders and an autoexec.cfg (if you already have one, you can make manual changes). I would like your feedback on this system; if it works I intend to apply it to my other skin packs.
For Compact Installations - A Note About Autoexec.cfg:
Rather than copying texture files to their respective livery folders, I prefer to use a series of common texture folders along with unique filenames. This allows a single instance of many of my common textures, and keeps the hard drive footprint to a minimum (especially nice if you run a SSD for your system drive).
The installer will add a series of folders to the DCS Texture path; if you do not have these folders created, then it is no problem. The autoexec.cfg included will automatically point to the Texture folder in your Saved Games\DCS folder, and regardless of whether you run the Open Alpha, Open Beta, or Release version of DCS, the path will always point to your Saved Games\DCS\Texture folder. Again, this saves space on your hard drive.
If you use your own Autoexec.cfg, then when prompted to overwrite you can click "no". This will create a file called autoexec.new, and you can manually make the updates as you like. Just don't modify the top line with the file date; this is used by the installer for version control. However, feel free to include it in your existing autoexec.cfg, so you don't get prompted to overwrite until there's another update to the autoexec.cfg.
If you inadvertently overwrite your autoexec.cfg, it is actually backed up as autoexec.old. Just open it and copy the appropriate information to the new file.
For Traditional Installations:
If there is an issue with textures not displaying, it is likely a problem with the installer. Please let me know what textures are missing so that I can troubleshoot the issue.
Special thanks to EricJ for his USMC Ka-50 skin, which I used as the basis for this skin pack as well as the bleaching effects for weathered skins.
You are free to use any of the textures in other skins or projects as long as proper credit is provided in the readme file.
-Home Fries
10 downloads
(0 reviews)0 comments
Updated
-
Ka-50 USMC HMLA-269 "Gunrunners" Skin Pack
By HomeFries
Marine Attack Helicopter Squadron (HMA) 269, commissioned in July 1971 at MCAS New River, NC, has the distinction of being the first Attack hHelicopter squadron in the Marine Corps. HMA-269 flew the AH-1J until December 1977, when it received the AH-1T. The Gunrunners then made history again in 1979 by being the first Marine Squadron to fire a TOW missile from an airborne platform.
In the early 1980s, HMA-269 received its first UH-1N Hueys, and as a permanent composite squadron was redesignated HMLA-269. Since then, the Gunrunners have deployed to hotspots such as Iraq, Kosovo, Somalia, Liberia, Haiti, and Afghanistan.
Today the HMLA-269 "Gunrunners" fly the UH-1Y Venom and the AH-1W Super Cobra.
This is a fictional skin pack of Ka-50 Black Sharks with HMLA-269 markings. There are six different Modexes (USN/USMC side numbers) allowing you to create packages of different aircraft. Each skin has a "normal" version and a weathered version. Weathered skins have a bleached effect as if the aircraft were heavily exposed to the sun for months on end. Normal skins include pilots with green flightsuits, while weathered skins include pilots with desert flightsuits.
Note: this skin pack uses an EXE installer that creates common texture folders and an autoexec.cfg (if you already have one, you can make manual changes). I would like your feedback on this system; if it works I intend to apply it to my other skin packs.
For Compact Installations - A Note About Autoexec.cfg:
Rather than copying texture files to their respective livery folders, I prefer to use a series of common texture folders along with unique filenames. This allows a single instance of many of my common textures, and keeps the hard drive footprint to a minimum (especially nice if you run a SSD for your system drive).
The installer will add a series of folders to the DCS Texture path; if you do not have these folders created, then it is no problem. The autoexec.cfg included will automatically point to the Texture folder in your Saved Games\DCS folder, and regardless of whether you run the Open Alpha, Open Beta, or Release version of DCS, the path will always point to your Saved Games\DCS\Texture folder. Again, this saves space on your hard drive.
If you use your own Autoexec.cfg, then when prompted to overwrite you can click "no". This will create a file called autoexec.new, and you can manually make the updates as you like. Just don't modify the top line with the file date; this is used by the installer for version control. However, feel free to include it in your existing autoexec.cfg, so you don't get prompted to overwrite until there's another update to the autoexec.cfg.
If you inadvertently overwrite your autoexec.cfg, it is actually backed up as autoexec.old. Just open it and copy the appropriate information to the new file.
For Traditional Installations:
If there is an issue with textures not displaying, it is likely a problem with the installer. Please let me know what textures are missing so that I can troubleshoot the issue.
Special thanks to EricJ for his USMC Ka-50 skin, which I used as the basis for this skin pack as well as the bleaching effects for weathered skins.
You are free to use any of the textures in other skins or projects as long as proper credit is provided in the readme file.
-Home Fries
9 downloads
(0 reviews)0 comments
Updated
-
UH-1 USMC HMLA-269 "Gunrunners" Skin Pack
By HomeFries
Marine Attack Helicopter Squadron (HMA) 269, commissioned in July 1971 at MCAS New River, NC, has the distinction of being the first Attack hHelicopter squadron in the Marine Corps. HMA-269 flew the AH-1J until December 1977, when it received the AH-1T. The Gunrunners then made history again in 1979 by being the first Marine Squadron to fire a TOW missile from an airborne platform.
In the early 1980s, HMA-269 received its first UH-1N Hueys, and as a permanent composite squadron was redesignated HMLA-269. Since then, the Gunrunners have deployed to hotspots such as Iraq, Kosovo, Somalia, Liberia, Haiti, and Afghanistan.
Today the HMLA-269 "Gunrunners" fly the UH-1Y Venom and the AH-1W Super Cobra.
This is a collection of six UH-1 skins representing HMLA-269. The skins included are:
HF-00 (2010)
HF-01
HF-04
HF-07 (ca. 2009)
HF-22
HF-44
Each skin has a "normal" version and a weathered version. Weathered skins have a bleached effect as if the aircraft were heavily exposed to the sun for months on end. Normal skins include pilots with green flightsuits, while weathered skins include pilots with desert flightsuits.
Note: this skin pack uses an EXE installer that creates common texture folders and an autoexec.cfg (if you already have one, you can make manual changes). I would like your feedback on this system; if it works I intend to apply it to my other skin packs.
Skinner's Philosophy:
Because the 3D models used for the aircrew utilize modern flight gear I have chosen to model the skins as "modern aircraft with nostalgic patterns", as opposed to actual historical skins.. The significance of this is that I have chosen to skin the aircrew in contemporary flight uniforms. I felt that this was more fitting in a setting that involves modern orders of battle, and is also less of an immersion-killer than seeing Vietnam era "uniforms" on clearly modern objects.
A note about the Crew Chief & Door Gunner:
Since enlisted US troops don't wear rank/rate insignia on flightsuits, their rank/rate is displayed on their nametag. Since there are no specific nametag textures for the crew chief/door gunner texture, I have added a nametag to the velcro on the chest armor (as is standard practice).
In choosing names for the texture, I opted for US servicemembers who received the Medal of Honor. CPL Jason Dunham was posthumously awarded the Medal of Honor in the Global War on Terror, and represents the Unites States Marine Corps in these skins. The following is his Medal of Honor citation:
For conspicuous gallantry and intrepidity at the risk of his life above and beyond the call of duty while serving as Rifle Squad Leader, 4th Platoon, Company K, Third Battalion, Seventh Marines (Reinforced), Regimental Combat Team 7, First Marine Division (Reinforced), on 14 April 2004. Corporal Dunham's squad was conducting a reconnaissance mission in the town of Karabilah, Iraq, when they heard rocket-propelled grenade and small arms fire erupt approximately two kilometers to the west. Corporal Dunham led his Combined Anti-Armor Team towards the engagement to provide fire support to their Battalion Commander's convoy, which had been ambushed as it was traveling to Camp Husaybah. As Corporal Dunham and his Marines advanced, they quickly began to receive enemy fire. Corporal Dunham ordered his squad to dismount their vehicles and led one of his fire teams on foot several blocks south of the ambushed convoy. Discovering seven Iraqi vehicles in a column attempting to depart, Corporal Dunham and his team stopped the vehicles to search them for weapons. As they approached the vehicles, an insurgent leaped out and attacked Corporal Dunham. Corporal Dunham wrestled the insurgent to the ground and in the ensuing struggle saw the insurgent release a grenade. Corporal Dunham immediately alerted his fellow Marines to the threat. Aware of the imminent danger and without hesitation, Corporal Dunham covered the grenade with his helmet and body, bearing the brunt of the explosion and shielding his Marines from the blast. In an ultimate and selfless act of bravery in which he was mortally wounded, he saved the lives of at least two fellow Marines. By his undaunted courage, intrepid fighting spirit, and unwavering devotion to duty, Corporal Dunham gallantly gave his life for his country, thereby reflecting great credit upon himself and upholding the highest traditions of the Marine Corps and the United States Naval Service.
CPL Dunham is also the namesake of the USS Jason Dunham (DDG-109), the Marine Corps Security Force barracks in Kings Bay, GA, and Crucible stations at both MCRD Parris Island and MCRD San Diego.
A Note About Autoexec.cfg:
Rather than copying texture files to their respective livery folders, I prefer to use a series of common texture folders along with unique filenames. This allows a single instance of many of my common textures, and keeps the hard drive footprint to a minimum (especially nice if you run a SSD for your system drive).
The installer will add a series of folders to the DCS Texture path; if you do not have these folders created, then it is no problem. The autoexec.cfg included will automatically point to the Texture folder in your Saved Games\DCS folder, and regardless of whether you run the Open Alpha, Open Beta, or Release version of DCS, the path will always point to your Saved Games\DCS\Texture folder. Again, this saves space on your hard drive.
If you use your own Autoexec.cfg, then when prompted to overwrite you can click "no". This will create a file called autoexec.new, and you can manually make the updates as you like. Just don't modify the top line with the file date; this is used by the installer for version control. However, feel free to include it in your existing autoexec.cfg, so you don't get prompted to overwrite until there's another update to the autoexec.cfg.
If you inadvertently overwrite your autoexec.cfg, it is actually backed up as autoexec.old. Just open it and copy the appropriate information to the new file.
Special thanks to upuaut for assistance with the more "exotic" material names, as well as the assistance with custom rotor colors.
You are free to use any of the textures in other skins or projects as long as proper credit is provided in the readme file.
-Home Fries
13 downloads
(0 reviews)0 comments
Submitted
-
M-2000C: US Marine Corps Adversary Squadron VMFT-401 "Snipers"
By HomeFries
M-2000C: US Marine Corps Adversary Squadron VMFT-401 "Snipers"
for DCS World 1.5.6 and later
VMFT-401 was commissioned in 1986 and in 1987 received the IAI Kfir (designated F-21A) under lease from the Israeli government. The "Snipers" flew the Kfir until 1989, when it transitioned to the F-5E Tiger II. This skin is inspired by the 1987-89 timeframe in which USN and USMC flew the Kfir, a delta-wing aircraft of French origin.
The Kfir was built by IAI based on the Mirage V airframe. The closest flyable substitute to the Kfir in DCS is the M-200C, so this is a fictional skin that paints the M-2000C as a USMC adversary. This skins uses the traditional Israeli Air Force desert pattern that was used on some of the VMFT-401 adversary aircraft. Since the original aircraft were leased and kept much of their original markings, so is the case with the M-2000C skins. No original markings (e.g. rescue arrows and safety markings) were subdued to match US paint schemes. However, minor liberties were taken with the pilot skins in order to make the pilots look more American.
For Compact Installations - A Note About Autoexec.cfg:
Rather than copying texture files to their respective livery folders, I prefer to use a series of common texture folders along with unique filenames. This allows a single instance of many of my common textures, and keeps the hard drive footprint to a minimum (especially nice if you run a SSD for your system drive).
The installer will add a series of folders to the DCS Texture path; if you do not have these folders created, then it is no problem. The autoexec.cfg included will automatically point to the Texture folder in your Saved Games\DCS folder, and regardless of whether you run the Open Alpha, Open Beta, or Release version of DCS, the path will always point to your Saved Games\DCS\Texture folder. Again, this saves space on your hard drive.
If you use your own Autoexec.cfg, then when prompted to overwrite you can click "no". This will create a file called autoexec.new, and you can manually make the updates as you like. Just don't modify the top line with the file date; this is used by the installer for version control. However, feel free to include it in your existing autoexec.cfg, so you don't get prompted to overwrite until there's another update to the autoexec.cfg.
If you inadvertently overwrite your autoexec.cfg, it is actually backed up as autoexec.old. Just open it and copy the appropriate information to the new file.
For Traditional Installations or JSGME Compatible Extractions:
If you don't wish to use the shared texture folder and custom autoexec.cfg, you have a couple of other options available. Selecting the Traditional Install copies all textures to each livery folder, then copies each livery to each version of DCS detected (up to three versions, including release, open alpha and open beta). As a result, the listed hard disk space requirement assumes all three DCS versions are installled. Each skin is independent and portable.
If you wish to install to a location other than your Saved Games folder, you must select the Single JSGME Extraction, or else the installation will fail for not detecting existing Saved Games\DCS folders. Selecting this option will create a JSGME compatible install that can be dropped directly into your JSGME _MODS folder for installation. Each skin is independent and portable.
For either of these installation options, if there is an issue with textures not displaying, then it is likely a problem with the installer. Please let me know what textures are missing so that I can troubleshoot the issue.
If you have any squadron requests, please PM me. If possible, provide top and profile views of the aircraft, preferably line art (much easier to extract color), and for CAG/CO birds, a close up of the tail fin is greatly appreciated.
You are free to use any of these skins in other projects as long as proper credit is provided in the readme file.
Fly Navy!
-Home Fries
40 downloads
(0 reviews)0 comments
Updated
Sign in to follow this
Followers
0
-
Download Statistics
14,210
Files12,492
Comments26,862
Reviews