First Eagles - WWI and Early Years - Add-On Aircraft

Fokker E.IV and E.IVa
 
Model by Laton
Skins (E.III) by v. Deutschmark
FM by peter01.
 
The zip file contains two variants, with alternate armament (2 and 3 gun) configurations.
 
Release pack also includes original bmp templates for anyone who wishes to make and distribute their own skins.
 
Check the Readme for installation instructions and any other notes.

The Fokker Aircraft Company produced several biplanes during the time it was producing it's famous Eindeckers. Two of them, the M.7 and the M.10 were purchased by Austria-Hungary and were both designated the "B.I" My version is the M.7 (I believe Bwf/Bortdafarm's version is the M.10 since it has a wider lower wing.)
 
The M.7/B.I was a two seater plane for reconnaissance and carried no guns. The pilot was in the rear seat. Later in the war, when the B.I was used for training, some of them were fitted with dual controls.
 
Mine is unarmed, like most planes used in the early months of the war, but there is a loadout for a couple of handgrenades.
 
I have included two skins, one Austrian, the other German, with appropriate decals for each. I have included my skinning templates so others can make new skins if they want.
 
 
Historical Notes
The serial numbers are fictitious. The cockpit is based on the Eindecker cockpit, since I could find no photo's of the B.I cockpit.
 
 
Credits
My thanks to ojcar, who created the FM for the Fokker B.I.
 
My thanks also to Nix, who provided the sound for the Gnome 80hp engine. (This is the same sound file I uploaded with the Sikorsky. If you already have either of the Sikorsky's you won't need to install the sound.)
 
 
Installation instructions
Note: The name uses an "I", not a one. If you type it wrong, the game won't recognize the plane.
 
For FE1 - Unzip the file and move the folder named "FokkerM7BI" into the "Aircraft" folder in the FirstEagles/Objects folder. You may also need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
 
For FE2 - Unzip the file and move the folder named "FokkerM7BI" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "FokkerM7BI". Move the folder named "D" from the Aircraft/FokkerM7BI folder into the Decals/FokkerM7BI folder you just made. You may also need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER BI For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;
bit of extra work on the damage effects and bomb load
top wing damage effects tail damage effects
(not clear wether all of this is working as required but not seen any ILL effects so..)

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER BII For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes# 13/04/07
revised model file and textures
 
Piloting notes#
 
rudder is VERY effective BUT watch yourself
it can't be used as a magic "uber control"
as you will find yourself in a unrecoverable dive if you do not balance your turns
with both the elevator and the wing warp (ailerons)
in actual fact the rudder is no more effective than say the SE5a BUT you rely on it
far more here simply because the ailerons are so poor..(wing warp again)
elevator is slow to respond so don't let the nose go down too close to the ground
use your climb ability (exagerated) to gain advantage where you find your
turn rate leaves you at a disadvantage...
max speed around 80 mph..
so it goes like this..
 
speed slow
ailerons poor
rudder strong
elevator slow
climb excellent
quirks tendency to dive steeply with over enthusiastic rudder usage
it is strongly reccomended that you use opposite aileron control during tight turns.
 
once this is understood any enemy aircraft of this era is fair game.
good hunting
 
Bort'

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER DII For FIRST EAGLES v5
 
revised model and textures includes skin pack up-dated 04/07
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;;;
complete model/texture rework
as of 08/04/07
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER DIII For FIRST EAGLES
 
revised model and textures up-dated 04/07
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;;;
fm- player version (hard)
 
complete model/texture rework
as of 11/04/07
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE
 
other notes;
reversed rudder control on your system?;;;
open the FokkerDIII_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER DIII (late war aileron version) For FIRST EAGLES
 
revised model and textures up-dated 04/07
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;;;
fm- player version (hard)
revised model and textures texture mapping
 
other notes;
reversed rudder control on your system?;;;
open the FokkerDIIIL_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER EIII For FIRST EAGLES
 
revised model and textures up-dated 04/07
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;;
basic custom cockpit added
minor model tweaks
texture lighting/mapping tweaks
hard mode FM tweaks
 
other notes;
reversed rudder control on your system?;;;
open the EindeckerEIII_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
FOKKER EIV For FIRST EAGLES
 
revised model includes cockpit up-dated 04/07
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notice;;
gunproblem....Fixed thanks to "BWF"
 
other notes;;;11/04/07
revised model file and textures...
includes custom basic cockpit
 
 
other notes;
reversed rudder control on your system?;;;
open the FokkerEIV_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

UPDATE: 3rd September
 
There's a bit of a mix, some AI only changes, some minor changes, mostly major FM changes.
 
N11, N16, N17, N17bis, Halberstadt D3, Fokker D2. AI changes only.
 
Pfalz EV, Fokkers EIV/EVa. Changed, more difficult to fly and roll reduced.
 
Dh2. Minor changes to stalls.
 
FokkerD7. Minor change, roll reduced and more stable.
 
Pup, Tripe, F2b, Dolphin, Se5a, Snipe, N28, Spad13, FokkerDr1, PfalzD3. Major changes.
 
Some things worth pointing out:
 
Dolphin. 4 and 2 Gun versions, 2 Gun version thanks to p10ppy, but otherwise same FM. The default is the 2 gun one. There are backups of each version in the folder hopefully clearly named so you can delete default and copy another to pick and choose.
 
F2b. Overwing Lewis and Without Lewis versions from Mike Dora's idea, and in folder with backups of each, same FM. Default is Without Overhead Lewis. The gun is removed, but the mount for the Lewis is still in place on this model, as I found some graphical glitches when that was removed.
 
Fokker Dr1. Two FMs, TKs with AI changes and mine. Default is mine... its your choice.
 
 
===========================================================================
 
These are ONLY for the Unpatched Expansion Pack version - October 2007. They will not work well at all with the April 2008 patch nor will they work mixed with stock FMs.
 
The FMs are written for Hard FM mode. They will not work well, or as designed, in Normal or Easy Mode (Flight Models are completely different and inconsistent).
 
There is a comprehensive Readme, and includes the following sections:
 
1) Introduction
2) The FMs
3) Additional Changes to FMs
4) Extras
5) AI Difficulty Setting
6) The Campaigns
7) Installation
8) Acknowledgements & Caveats
 
Installation is simple, but should be done on a clean install of original FE (no patch), then Oct 2007 EP (no patch). You do need to get all the add-on aircraft models installed first.
 
80 FMs included, and many thanks to all the modellers for allowing me to do these. All are needed for campaigns.
 
Bortdafarm - Pfalz B1, Fokker B1, Fokker B2, Fokker D2, Fokker D3, Martinsyde G100, Martinsyde S1, Avro 504D.
 
Monty CZ - Nieuport 11, Nieuport 16, Nieuport 17
 
EmID - Nieuports 24 (2), Nieuports 27 (4), Nieuport 28, Hanriots (3)
 
Laton - Fokker E1, Fokker E1a, Fokker E3, Fokker E3a, Fokker E4, Fokker E4a, Pfalz E1, Pfalz E3, Pfalz E4, Morane H, Morane L, Morane LAO, Fokker D8, Bristol M1c
 
Thirdwire - Albatros D3, Albatros D3OAW, Albatros D5, Albatros D5a, FokkerDr1, Fokker D7, Fokker D7F, DFW C5, Camels (3), Spad 7s (2), Spad 13, Se5a, Salmson, Re8
 
p10ppy - Morane N, Spad 12
 
A-Team - Be2c, Be2d, Fe2b, Fe8, Dh2, Pup, Triplane, Dolphin, Snipe, Breuget 14, F2B, Halberstadt D3, Walfisch, Aviatik C2, Pfalz D3, Pfalz D8, Pfalz D12, Schuckert D3, Junkers D1.
 
In addition, some planes that use another 3-D Model: N17bis, N23, Fe2c, AlbatrosD3_160, AlbatrosD3OEF_200, AlbatrosD2, DFWC1. These are needed for campaigns also. See Installation instructions.
 
FMs are mainly by me, but Spad12 FM is by P10ppy, and Camels, Fokker Dr1, Spad 7s are by Thirdwire. The RE8 is largely Thirdwires with some changes to improve takeoff and turning. All have AI changes to fit with other FMs.
 
Have fun!
 
Peter July 2008

She's not a WWI aircraft, but she's set up for FE. Definitely Beta, but if you want something with some zip against those Fokkers, well, try her out.

The Halberstadt CL.II was a German, 2 seat fighter/escort plane. The CL.II was designed to be an escort for reconnaissance flights. Its excellent maneuverability made it a match for single seat fighters and its field of fire made it an excellent ground attack plane. It entered service in August 1917 and was used in large numbers until the end of the war.
The Halberstadt CL.II had a plywood fuselage and was powered by a six-cylinder Mercedes D.III engine. It had a 7.92mm Spandau machine gun in the front fuselage for the pilot and a 7.92mm Parabellum gun on a ring mount for the observer. It could also carry a light bomb load. My version has a rack for 10 stick grenades mounted on the fuselage.
My download includes a hex camo skin, appropriate decals, and a fully functional cockpit. My skinning templates are included with the download.
I have included a sound file for the Mercedes D.III engine. The same sound has been used with other planes and you may already have it installed. I have included the sound file with the download in case you don't have it.

Credits
My thanks to Ojcar for making the data file for the Halberstadt CL.II and for making improvements to the guns.
My thanks to Nixou for making the sound file for the Mercedes engine many years ago.

Installation Instructions
For FE1 - Unzip the file and move the folder named "HalberstadtCL2" into your FirstEagles/Objects/Aircraft folder.
If you don't already have it, move the sound file "mercedes160m2.wav" from my "Sounds" into your "Sounds" folder. 

For FE2 - Unzip the file and move the folder named "HalberstadtCL2" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "HalberstadtCL2." Move the folder named "D" from the Aircraft/HalberstadtCL2 folder into the Decals/HalberstadtCL2 folder you just made. 
If you don't already have it, move the sound file "mercedes160m2.wav" from my "Sounds" into your "Sounds" folder. If you don't have a Sounds folder, you can make one.

Halberstadt CL.IV Ver 1 1 July 2009
 
Original Model: Geezer
First Eagles Conversion, Damage meshes & Skin: Andre (Laton) Simpson
FM: Peter01
Gunner mesh & Skin provided by Geezer
 
 
***Spandau/Parabellum machine gun and Propeller based on the source file from Wings of War by Silver Wish Games/Illusion Software provided by Radek Navratil.
 
 
 
Template pack included for skinners.
 
See readme for installation instructions.

This aircraft is an all-new model, with hi-res skins. The D5 was basically a cleaned up D3. The upper wing structure was revised with a simpler strut system that improved pilot visibility, and the exhaust system was simplified. The D5 had provision for two Spandau machine guns, but usually just one was installed on the left side (to save weight). The D5's structure was very strong for its day, but the 120 hp engine was not powerful enough to match the performance of Albatross fighters so only fifty-seven D5s were built.
 
A separate graphics pack will be posted soon, containing textures and templates.
 
To install, unzip the contents to a new folder.
 
For FE/FEG: I don't have them so I don't know how to install these files. If you run FE/FEG and have trouble loading these files, post a question in the First Eagles section here at Combat Ace - someone should help you.
 
For FE2:
Copies of three ini files - ENVIRONMENTSYSTEM, SOUNDLIST, VIEWLIST - go in your FLIGHT folder.
A copy of the HalberstadtD5 folder goes in your OBJECTS/AIRCRAFT folder.
A copy of the Pilots folder goes in your OBJECTS folder.
A copy of the SOUNDS folder goes in your First Eagles 2 folder (alongside FLIGHT, OBJECTS, etc)
 
There is a long list of guys who helped me produce this aircraft, or posted stuff that I used to complete the package:
- Stephen1918
- Ojcar
- gambit168
- Sully
- Southside Bucky
- Nixou
- Viper63a
 
I've probably forgotten someone - if so, my apologies. Enjoy!

Contains layered artwork (PSD format) for the Halberstadt D5. Layers include templates, plus mid-war German insignia and Turkish insignia.

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
HALBERSTADT DII For FIRST EAGLES
 
revised model and textures includes skin pack and pit up-dated 04/07
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;;;
fm- player version (hard)
revised model file and textures
 
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE
 
other notes;
reversed rudder control on your system?;;;
open the FokkerDIIIL_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
HALBERSTADT DIIa/III For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
this is the re-engined version with extended ailerons
I found half a dozen different versions of this aircraft all described as the DIII
most don't fit the statistical descriptions ..but the photos show the extended ailerons larger wheels,
and the engine with a side mounted exhaust sytem running back along the side of the fuselage
and the DII centre section strut configuration with an additional set sloping forward over the engine bay etc...
so here it is....marginally faster and marginally better aileron response..
 
notes;;;
fm- player version (hard)
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE
 
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

Hannover CL.II & CL.III Ver 1 26 May 2009
 
Model & Skin by Andre (Laton) Simpson
 
Gunner mesh & Skin provided by Geezer
 
FM by Peter01
 
 
Check readme for installation instructions.

The Hanriot HD.2 was a French, single seat float plane version of the Hanriot HD.1. It had a larger tail, shorter wings, and mounted 2 Vickers machine guns. It was used by the French as an interceptor, defending seaplane bases, and as an escort for reconnaissance planes.
 
Since it's a float plane, the Hanriot HD.2 works best in the North Sea terrain, or in Flanders, Gibraltar or other terrain that has a lot of water. The plane will actually take off and land from a conventional airfield, but it looks strange to see the floats going under the ground.
 
I have included two skins, a generic linen skin and a 4 color camo skin. The camo skin may be fictitious and uses the French 4 color camo pattern, but with blue and grey colors instead of greens and browns. I have included a set of decals. My skinning templates are included with the download.
 
 
Credits
Thanks to Ojcar for making the data file for the Hanriot HD.2 and for providing information for the cockpit.
Thanks to Nix for providing the sound for the engine.
 
 
Installation Instructions
For FE1 - Unzip the file and move the folder named "HanriotHD2" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "clerget9b2m2.wav" into the FirstEagles/Sounds folder.
 
For FE2 - Unzip the file and move the folder named "HanriotHD2" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "HanriotHD2". Move the folder named "D" from the Aircraft/HanriotHD2 folder into the Decals/HanriotHD2 folder you just made. You also need to move the sound file "clerget9b2m2.wav" into the FirstEagles/Sounds folder.

November-December 2007
 
Hanriot HD1 (Vickers MG in the middle)
 
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
 
 
 
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

November-December 2007
 
 
Hanriot HD1 CAM (Italy) (Vickers MG on the leftside)
 
 
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
 
 
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

November-December 2007
 
Hanriot HD1 Dual (2x Vickers MG)
 
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
 
 
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

The Hansa-Brandenburg C.I was an Austro-Hungarian two seater, similar in size and configuration to the German Albatros. It was introduced in 1916 and used throughout the war, with more powerful engines in later versions. The HB C.I was used primarily for reconnaissance and light bombing, although it saw service as a fighter early in the war. Early versions of the plane carried a gun pod on the upper wing. After a better synchronization system was developed, the gun was moved down to the left side of the fuselage.
 
I have included three different versions of the plane with this download. Ojcar has created FM's for the 160hp, 200hp, and 230hp engines, and Nix has provided the engine sounds for all three. There are three slightly different models, with different loadouts, different serial number decals, and different skins for each plane, so there are three complete planes which can be installed individually or all together.
 
The skins are interchangeable, except for the serial numbers, but you may see some stretching on the nose of the 230hp version. Each skin has a "Standard" version which will allow you to change nationalities, and an "Austrian" version with the cross at mid wing. The Austrian version won't let you change the national insignia. I have included my skinning templates.
 
Ojcar has also provided two new guns for this plane. For FE1, we have included Peter01's GunData.ini with Ojcar's guns added. To load the new guns you will need the Gun Editor available from the Combat Ace download area, (I have provided a link at the end of this page.) For FE2, Ojcar has provided the necessary files.
 
 
 
Credits:
My thanks once again to Ojcar for making three excellent data.ini files and two new gun data files for this plane - and for teaching me how to add guns to First Eagles.
 
My thanks to Nix who created the engine sound files for the Austro-Daimler 160, 200, and 230 horse-power engines.
 
Thanks also to Sinbad and Quack74 who provided reference materials for the Hansa-Brandenburg C.I
 
 
 
Installation instructions:
For FE1: Unzip the file and move the three folders named "HBC1_160" "HBC1_200" and "HBC1_230" into the FirstEagles/Objects/Airplanes folder. Move the three sound files named "Austro-daimler160.wav" "Austro-daimler200.wav" and "Austro-daimler230.wav" into the FirstEagles/Sounds folder.
 
To add guns you'll need the Gun Editor program (available in the Combat Ace Downloads area.) Move the newGundata.ini file into the FirstEagles/Objects folder. Open the Gun Editor and click the Open button. Find the Gundata.ini you just installed and open it. Make sure the new guns are there (the last one in the list should be "8MM_SCHWARZLOSE_M0712" Click the Save button and close the Gun Editor. You have the new guns!
 
 
For FE2: Unzip the file and move the three folders named "HBC1_160" "HBC1_200" and "HBC1_230" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create three new folders named "HBC1_160" "HBC1_200" and "HBC1_230". Move the folder named "D" from the Airplanes/HBC1_xxx folders into the corresponding Decals/HBC1_xxx folders you just made. Move the three sound files named "Austro-daimler160.wav" "Austro-daimler200.wav" and "Austro-daimler230.wav" into the FirstEagles/Sounds folder.
 
To add the guns move both gun folders ("8MM_SCHWARZLOSE_M0712" and "8MM_SCHWARZLOSE_M0712_Gunner") into your Guns folder (in your mod files folder) and you're done!
 
 
This is the URL for Gun Editor I use for FE1:
http://combatace.com/files/file/103-sf-gun-editor-for-strike-fighters/

Hansa-Brandenberg D1 "Star-Strutter" Ver.1 08 April 2009
 
Model & Skin by Andre (Laton) Simpson
 
FM by peter01
 
 
Please check the read-me for installation instructions.
 
 
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes

L63. A fictitious zeppelin for target practice. You can attempt to fly it if you wish, but don't start on the ground.