SF2 WW2 ETO, P-51C Mustang, 382nd FS Skin Pak 6/26/14
= For SF2, (Full 5 Merged Reccomended/Prefered) =
A new skin for ETO based P-51C (Malcom Hood) Mustangs. If you don't have the SF2 Uprated version, you can get it at the following URL:
http://combatace.com/files/file/13216-p-51c-mustang-eto/
This skin represents aircraft from the 382nd Fighter Squadron, 363rd Figher Group, 9th Air Force, as based in England, and later forward bases on The Continent after D-Day.
The aircraft is finished in 'natural metal', and carriers Invasion Stripes in the approximate time frame of July thru November 1944 (lower surfaces only).
The skin is in jpg format. All markings (excepting the QIM on the fin and tailplanes and Invasion Stripes) are decals. Decal randomization is TRUE. Serial numbers are correct for the model depicted, but NOT for any specific aircraft with this squadron. Consider them 'generic' in nature.
Also, included is a modified Data ini, as I made a few small changes (like attaching the tail light to the rudder, so it moves!)
Remember, historically, the only difference between a B and C model (as both could, and did, recieve the Malcom Hood mod), is the B was built in Ingelwood, California and the C in Dallas, Texas.
As both Wolf's B & C Mustang are mapped identically, End Users can use it for either one.
As always, fairly easy to follow, detailed install instructions are included. So, please read them . Also, give the "Notes" a glance, too.
Good Hunting!
Wrench
Kevin Stein
P-51D, 194th FS, CA ANG Skin/Decal Pak 6/25/2014
= For SF2 (Full 5 merged, reccomended/prefered, WITH SF2I Exp 1)
**You =MUST= have SF2:I Expansion Pak 1 for the Mustangs!! If you do not have that
expansion pak, this mod will do you no good**
A New skin/decal pak for the 3W Mustang, represents the 194th Fighter squadron,
California Air National Guard from 1948 through the mid-1950s. It was inspired by
suhjake's mod for Wolf's old D mustang. In fact, I reused several of the original
decals. They are marked with a star (*). All the others are new builds. You have 26
total serial and "wing ID numbers".
The skin is in jpg format, and Decal randomization is TRUE. The "StartDefaultDsate"
switch is also used, and is set for 1948.
As always, fairly easy to follow, detailed install instructions are included. So,
please read them ....
Happy Landing!
Wrench
Kevin Stein
These generic skin sets were made by me and are for Third Wire's P-51D.
They can be used to create most Royal Air Force camoflaged Mustang Mk. IV units.
Two sets are provided: RAFCamo1 has a red spinner, while RAFCamo2 has a white one.
NO decal.ini's are provided (sorry!).
P-51D Mustang Skin & Decal Pak
Fuerza Aérea - Ejército de Nicaragua (Nicaraguan Army Air Force) -For 3W P-51D-
== For SF2, Full-4 Merged (at minimum, SF2:I +Expansion Pak 1) ==
-As stated above, you MUST have at the very least SF2I WITH expansion Pak 1, or you won't have access to the aircraft and it's cockpit.-
The is a partial reskin/redecaling of the stock 3rdWire P/F-51D Mustang into those as used by the FAN durning the 1950-70s (as many Latin American Air Forces used them for quite some time!!). Many of these aircraft took part in the (in)famous "Soccer War".
It represent's FAN Mustangs from the 1950 through their retiement in the 1970s.
-------
Note: if you want to get the corrected lighting and operating canopy, you should (it's reccomended!) get this Mutang Upgrade Pak from the following URL:
http://combatace.com/files/file/10968-3rdw-p-51-decals-and-ini-tweek-pak/
Not only will it add the 100% historically correct lights, but it'll tweek up the USAF skin with proper decal placements, and serial numbers
-------
This package has already been setup/broken down into the various sub-folder that SF2 needs (and requires) for ease of installation. (read: drag and drop)
As always, faily simple, easy to follow, detailed install instructions are included
Happy Landings!
Wrench
kevin stein
Vought F4U-1 "Birdcage" Corsair Generic USMC Skin Pak (TMF/MM) 7/27/2013
= For SF2, Full-4/5 Merged (Reccomended/Preferred) =
= For WW2 PTO Usage ONLY on the TMF/MM Birdcage Corsair!!! =
This is a 'generic' USMC skin and decal pack for the TMF/MM F4U-1 "Birdcage" Corsair. The aircraft is finished in the late 1943 "3 Tone Camo", and has the 3 digit aircraft ID numbering. These numbers represent the last 3 digits of the BuNum, and was the fairly standard way land base USMC squadrons used on their aircraft. The aircraft carries the standard late 43 blue Star-and-Bar.
This skins is in jpg format, and decal randomization is set to TRUE. Although 'named' for VMF124 (L for Late), it is designed to represent NO particular USMC squadron. It also used the SF2 'time switch' to "turn on" this skin in October, 1943.
A new Data ini is also provided, with changes/tweeks that 'fix' some issues caused by the 5/13 and 7/13 patches. With luck, they won't need messing with again!
As always, fairly easy to follow, yet detailed install instructions are included. PLEASE read them!!!
Good Hunting!
Wrench
Kevin Stein
SF2 WW2 RAF SEAC Douglas Dakota Skin Pak 3/20/2014
-- Something for the WW2 CBI players --
= For SF2, Full-5 Merged, + Expansion Pak 1 (REQUIRED!) =
*You must have SF2:I Exp Pak 1, as this mod REQUIRES the stock 3W C-47*
This pak contains Skin/Decal mods for the Stock 3rd Wire C-47A, representing RAF Dakota's in WW2, in the India/Burma (SEAC) theatre. None of my research has turned up an information if they were camoflagued, so the aircraft is in standard OD/Grey.
Supplied are 26 plane-in group letters and RAF serial number decals. The serials, while correct for the Dakota, represent no particular unit and should be considered 'generic' in nature. There are NO squadron codes.
Decal randomization is TRUE
Also supplied is an updated/edited/adjusted C-47A User list, with many corrected dates.
*NOTE: this skin pak is for RAF Daks in SEAC =ONLY=!!! Read: your CBI mods folder.*
This little mod comes about as I'm sick and tired of seeing Dakota's parked on my terrains, with incorrect WW2 theatre markings (while not perfect even WITH this, they're a LOT closer!)
As always, fairly easy to follow, yet detailed install instructions are included. So, please =READ= them BEFORE installing this mod!!!
Happy Landings!
Wrench
Kevin Stein
SF2 WW2 RAF Douglas Dakota Skin Pak 3/1/2014
-- Something for the WW2 ETO/MTO players --
= For SF2, Full-5 Merged, + Expansion Pak 1 (REQUIRED!) =
*You must have SF2:I Exp Pak 1, as this mod REQUIRES the stock 3W C-47*
This pak contains Skin/Decal mods for the Stock 3rd Wire C-47A, representing
RAF Dakota's in WW2. This pak contains 2 skins:
RAF (Euro) -standard OD/Grey
RAF_D (Desert) - standard Day Desert
Supplied are 26 plane-in group letters and RAF serial number decals. The
serials, while correct for the Dakota, represent no particular unit and should
be considered 'generic' in nature. Both skins use a 'pool' of the letters and
serials. There are NO squadron codes.
Decal randomization is TRUE
Also supplied is an updated/edited/adjusted C-47A User list, with many
corrected dates.
End users are advised to choose which skin for what WW2 mods folder
they'll be using (Euro for the ETO, and Desert for the MTO, obviously!). Simply
rename the textureset ini for the skins NOT being used, and the Game Engine
will ignore it.
This little mod comes about as I'm sick and tired of seeing Dakota's parked on
my terrains, with incorrect WW2 markings (while not perfect even WITH this,
they're a LOT closer!)
As always, fairly easy to follow, yet detailed install instructions are
included. So, please =READ= them BEFORE installing this mod!!!
Happy Landings!
Wrench
Kevin Stein
SF2 WW2 ETO P-47C/D, 334th FS, 4th FG Skinpak 1/5/2014
-- Something for the WW2 ETO players --
= For SF2 ONLY, Full-5 Merged (Reccomended/Preferred) =
A slight reskinning/rebadging for Wolf's P-47 (Razorback), represents the 334th
FS, 4th FG shortly after converting from Spitfires to early P-47
"Thunderbolts".
This package is designed to work on/with my "P-47C/D (Early) Pak", available at
the following url:
http://combatace.com/files/file/13740-sf2-ww2-eto-p-47cd-early-pak/
Included is a slightly modified data ini, with corrected operation dates,
rounded to closest whole month. (you may with to back up the original data ini,
as a 'just in case', before installing this pak)
No weapons or pilot figures are included; you should have them already. The
skin is in jpg format, and decal randomization is TRUE.
The other 3 squadrons of the 4th can be easily recreated, by simple making a
"SCode.tga" (squadron code letter decal).
As always, fairly easy to follow, yet detailed install instructions are
included. So, please read them.
Happy Landings!!
Wrench
Kevin Stein