About This File
Exhaust smoke for the General Electric J79 equipped aircrafts.
There are 2 exhausts variants.
The "J79-F4ExhaustEmitter" can be used for every aircraft.
The "J79-F104ExhaustEmitter" instead have the tipical F-104 downward pushed exahaust caused by the Boundary Layer Control on the wings.
---------------------------------------------------------------------------------
Instructions:
1) Put the J79ExhaustEmitter.ini and SMOKE3.tga in the Effects folder.
2) Open the "aircraft"_DATA.INI and go down to the engine/s section.
(Example from the F-4C)
[Engine1]
SystemType=JET_ENGINE
InputName=THROTTLE_CONTROL
EngineID=1
HasAfterburner=TRUE
NumAfterburnerStages=4
SLThrustDry=44482.2
SLThrustWet=75619.8
ThrustAngles=0.0,7.00,0.0
ThrustPosition=-0.65,1.70,0.00
ThrottleRate=0.5
NozzleAnimationID=7
IdleThrottle=0.10
IdleRPM=0.68
IdleNozzle=0.0
CruiseThrottle=0.37
CruiseRPM=0.82
CruiseNozzle=1.0
MilThrottle=0.65
MilRPM=1.00
MilNozzle=1.0
MaxThrottle=0.78
MaxRPM=1.00
MaxNozzle=1.0
FullABThrottle=1.12
FullABRPM=1.00
FullABNozzle=0.0
AltitudeTableNumData=12
AltitudeTableDeltaX=1828.8
AltitudeTableStartX=0.0
AltitudeTableData=1.000,0.871,0.749,0.636,0.533,0.439,0.357,0.266,0.200,0.149,0.112,0.000
DryMachTableNumData=12
DryMachTableDeltaX=0.2
DryMachTableStartX=0.0
DryMachTableData=1.000,0.953,0.956,1.007,1.099,1.108,1.245,1.391,1.533,1.645,1.701,1.665
WetMachTableNumData=12
WetMachTableDeltaX=0.2
WetMachTableStartX=0.0
WetMachTableData=1.000,0.976,1.007,1.091,1.231,1.429,1.670,1.953,2.270,2.606,2.930,3.208
MaxInletTemperature=134.3
GyroscopicInertia=
TSFCM0=0.860
TSFCM1=1.207
AfterburnerTSFC=1.950
MinFuelFlow=0.01
ExhaustEmitterName=DirtyExhaustEmitter ---------------- <<<<Change this emitter>>>>
ExhaustPosition=-0.65,-3.63,-0.58
AfterburnerNodeName=afterburner
AfterburnerEmitterName=AfterburnerEmitter
MinExtentPosition=-1.13,-3.68,-1.02
MaxExtentPosition=-0.14, 1.36,-0.04
FireSuppression=TRUE
GasTempMaxRPM=635.0
GasTempIdleRPM=420.0
GasTempChangeRate=5.0
OverheatTemp=750.0
DamageTempDelta=300.0
OilPressMaxRPM=35.0
OilPressIdleRPM=55.0
OilPressChangeRate=0.5
LowOilPress=12.0
LowOilTempDelta=400.0
And change the emitter name into
ExhaustEmitterName=J79-F4ExhaustEmitter
or
ExhaustEmitterName=J79-F104ExhaustEmitter
----------------------------------------------------------------------------------------------
That's it.
Have a good flight and don't somke. 
Alex (Spillone104)
This File is Freeware and can not be sold or included in any Payware software.