U.S.A.F. Early Model Sabres

[+Dave 2,322]

U.S.A.F. Early Model Sabres

View File

---

F-86 Sabre

First of all I would like to think “USAFMTL” for allowing me to be a part of this effort.

Secondly thanks go to David Zurawski for his wonderful F-86 Sabre that is such a work of art.

Thanks to Wolf-257 and Crab_02 for the A and E model Sabres.

Thirdly thank you to all that have modeled and skined the work to developed individual sub-models of the F-86.

Thanks to Jimmy Bib for all his graphical engineering.

Lastly thank you to “Fubar 512" for his expert guidance in my effort in Flight Modeling.

 

Read the read me.

---

• Submitter
  Dave
• Submitted
  03/20/2008
• Category
  F-86 Saber

 

[+X RAY 83]

it gives the archive error too!

[+Corktip_14 0]

Worked fine for me!

[+X RAY 83]

downloaded anly the A and E then stopped,where are located the k-usaf pilots?

[+Dave 2,322]

downloaded anly the A and E then stopped,where are located the k-usaf pilots?

 

Those are Diego pilots and well you know how that goes.

 

I know this zip works as I tested it 3 times. Just to be sure.

[+Muesli 2,161]

Works like a charm!

[+X RAY 83]

yes I know it sooo well!

[+X RAY 83]

I've retried downloading and now I get it!!!!they're sweet!!!!!

[Ronbo 0]

I just D/L these late and early packs for my KAW install. The A-5 leading edge slats dont retract, they are always shown at out. Any way to fix this? SPf1 patched to oct 08b

Awesome work.

[Heck 496]

I just D/L these late and early packs for my KAW install. The A-5 leading edge slats dont retract, they are always shown at out. Any way to fix this? SPf1 patched to oct 08b

Awesome work.

 

Open the data.ini and scroll down to the section for the slats. You need to reverse the deploy and retract values. This is what I have in mine now.

 

[LeftSlat]

SystemType=HIGHLIFT_DEVICE

CLiftdc=-0.0104

CDdc=0.0028

Cmdc=-0.0002

DeltaStallAlpha=6.0

AreaRatio=1.033

DeploymentMethod=AUTOMATIC_AERODYNAMIC_LOAD

Setting[1].Angle=30.0

Setting[1].DeployValue=59.16

Setting[1].RetractValue=92.6

MaxDeflection=30.0

MinDeflection=0.0

ControlRate=0.3

AnimationID=10

 

[RightSlat]

SystemType=HIGHLIFT_DEVICE

CLiftdc=-0.0104

CDdc=0.0028

Cmdc=-0.0002

DeltaStallAlpha=6.0

AreaRatio=1.033

DeploymentMethod=AUTOMATIC_AERODYNAMIC_LOAD

Setting[1].Angle=30.0

Setting[1].DeployValue=59.16

Setting[1].RetractValue=92.6

MaxDeflection=30.0

MinDeflection=0.0

ControlRate=0.3

AnimationID=9

 

 

 

 

 

[Ronbo 0]

Thanks, that did the trick.