F-23A Black Widow Canopy Fix

[Phasers]

In every case where I install this awesome jet the canopy stays open during flight when viewed from the external cameras. I went in my F-23A located in my case here, C:\Program Files (x86)\Wings Over Europe\Objects\Aircraft\F-23A. I opened the F-23A DATA.ini file with notepad and located the Canopy settings. I don't write software or anything like that but I noticed both the Deploy and Retract values were the same set at 10.0. I changed the RetractValue to 11.0. It worked. If you have the same problem try this fix.

[Canopy]

SystemType=HIGHLIFT_DEVICE

DeploymentMethod=AUTOMATIC_SPEED

Setting[1].Angle=45.0

Setting[1].DeployValue=10.0

Setting[1].RetractValue=11.0

MaxDeflection=45.0

MinDeflection=0.0

ControlRate=1.0

ModelNodeName=Canopy_Frame

AnimationID=8

[+Wrench]

even better...

replace the canopy statement with this:

 

[Canopy]

SystemType=ANIMATION

InputName=ANIMATION_10

DeploymentMethod=MANUAL

AnimationTime=2.60

AnimationID=8

 

use Shift/0 to open and close

[Phasers]

"even better replace the canopy statement with this" Why do you think your way is any better than the one I posted...eh?.. Both ways are equally as good I would say.

[+Wrench]

simply put..

 

 

because it does

[+FastCargo]

Wrench's way is preferable because:

 

1. It closely mimics actual procedures (canopy position not related to speed but is manually closed and opened).

2. If you get in a slow speed situation in the aircraft while airborne, your canopy won't open with the manual method. The speed method will result in the canopy opening.

 

FC