Jump to content

Recommended Posts

A CombatAce and OBD Software special...

 

Bringing classic WW1 memoirs to life in Wings Over Flanders Fields!

 

Shot03-25-14-23-38-15.jpg

 

This year marks the hundredth anniversary of the outbreak of the First World War. To help mark this centenary - and to recall the courage and sacrifice of those who fought in the skies of WW1, for real - CombatAce, in partnership with OBD Software, will feature a unique series of mission reports.

 

Each article will take a look at one of the classic pilot autobiographies of the First World War and will then report on a campaign mission inspired by the book and flown to bring it to life. For this, we'll be using OBD Software's great new sim, Wings Over Flanders Fields, whose realistic orders of battle make it particularly well suited to this particular mission!

 

The books and the aeroplanes featured will be chosen to illustrate both the development of combat aircraft and the progression of the air war, from 1915 through to 1918. The titles and the planes we currently plan to cover are:

 

- Duncan Grinnell-Milne's 'Wind in the Wires' (BE2c, 1915);

 

- Cecil Lewis's 'Sagittarius Rising' (Morane parasol, mid-1916);

 

- Manfred von Richthofen's 'The Red Battle-flier' (Albatros DII, late 1916);

 

- Billy Bishop's 'Winged Warfare' (Nieuport Scout, early 1917);

 

- Arthur Gould Lee's 'No Parachute' (Sopwith Pup, mid-1917);

 

- James McCudden's 'Flying Fury' (SE5a, late 1917); and

 

- Rudolph Stark's 'Wings of War' (Pfalz D IIIa, mid-1918).

 

To accompany the series, we are pleased to announce that OBD Software will be offering a prize to the winner of a competition based on the reports; details will be announced soon.

 

We plan to begin the series in early April, so watch this space!

 

Shot03-25-14-23-43-50.jpg

Share this post


Link to post
Share on other sites

Sounds cool! But, FYI, Richthofen's autobiography was written in May 1917 and published later that year, before he began flying the Fokker Dr.I.  Thus, his book contains no accounts of flying that make/model of airplane.

Share this post


Link to post
Share on other sites

I'll look forward to this!  Maybe by then I'll have finished training... !

Share this post


Link to post
Share on other sites

Thanks Jim. I did consider the Albie for MvR but 1917 was getting a bit crowded and I didn't want to go back to late 1916. So think I'll stick with the Dr I! After all MvR, isn't terribly specific about aircraft types - security, and all that - so a bit of artistic licence may be forgiveable. Plans could change, though, 1918 is a long way off still!

Share this post


Link to post
Share on other sites

Artistic license is what it's going to take, I agree, because MvR's autobiography has nothing to do with either Fokker Dr.Is or 1918.

 

But, why not late 1916?  :dntknw:  MvR was at the sharp end of the brand new Albs while flying with Boelcke in Jasta 2, and he's written about flying them in his autobiography. The arrival of the Albatros in 1916 was a pivotal event of WW1 aerial warfare. Sure, WOFF doesn't have the Albatros D.I, but it has the Albatros D.II and there is the very famous fight with MvR and Hawker that is in MvR's autobiography. How about Udet's Ace of the Iron Cross for a Fokker Dr.I in 1918? He writes a pretty cool account of flying one with MvR, shooting down an RE8, watching MvR shoot down a Camel, and then the both of them (and others) strafing ground troops afterwards. MvR/Udet flying Fokker Dr.Is in 1918, based on Udet's book, equals two birds with one stone!

 

I know, I know, "Yankee go Home"! (Hasse, where's the sign? :grin: ) Despite my pedanthood, I think you have a fun idea and look forward to the results.

Share this post


Link to post
Share on other sites

Hi Jim

 

My edition of Die Rote Kampflieger includes a chapter by Lothar 'Memories of my Brother' which covers an air fight in Spring 1918 ('Last Flight with Manfred') and even an account of the shoot-down purported to be by A Roy Brown!

 

But on reflection, yes I'll switch to the Albatros DII in Autum 1916 - it'll bring a German plane into the mix sooner and better address the secondary objective of illustrating the development of aircraft during the war.

 

What are your own thoughts on how much of  the book represents Manfred's own words and thoughts? For example the section 'Thoughts in a dugout', which looks to have been a later add-on, possibly early 1918, reads to me like an officially-inspired attempt to tone down the 'gay hussar' tenor of the rest of the book, for the benefit of a more war-weary public. But even if the actual writing was that of a 'hack' writer, I like to think that we must be seeing something genuine of the Rittmeister's recollections, thoughts and feelings in that book.

Share this post


Link to post
Share on other sites

Hi, 33L,

 

From my research and studies for my MvR book, I believe Thoughts in a Dugout was written by MvR after the autobiography, but not in 1918. All evidence I've found indicates that in April 1918, MvR was 1. not morose, 2. not withdrawn, 3. no longer had headaches, 4. the Germans had been on a strong advance (Kaiserschlacht). This is based on personal recollections of those flying with MvR, numerous photographs, interviews with MvR, and his combat performance Thoughts in a Dugout was more likely written ca. mid/late August 1917, shortly after his headwound, when he had begun flying again but before he had been ordered away on recuperative leave.

 

In March 1918, his head wound was 8 months old. He no longer even wore a bandage on it. He had been away from the front on leave most of September and October 1917, most of December, and all of January 1918--i.e., he was well rested, with little flying in the winter after his return. He shot down 11 planes that month (two Big Acks, an RE8, a Biff, four Camels, two SE5as, and a Dolphin), 6 in April (one RE8 and five Camels), with long periods of bad weather preventing even more victories. This was his best performance since Bloody April a year before. He was fit, active, friendly, jovial, accessible (ie., not "behind four walls"), at the top of his fighting form. Thoughts in a Dugout matches nothing in that period. However, it does match everything with mid/late August 1917. His wound was slow to heal. He was bandaged. He had to get bone splinters removed from it. A letter home indicates he was unwell after flying. Other letters indicate his displeasure/frustration/disagreeent with the tactical doctrin being forced upon the Staffeln. A conversation in early July, recalled by Bodenschatz, revealed MvR's grim assessment of the current state of the war. He was frustrated with the Albatros company after being shot down in a new Albatros DV, the performance of which mirrored the DIII and did not offer the expected performance increase sought by German pilots. The Third Battle of Ypres had begun. All of these things better match the tone of TIADO.

 

IMO, people look for "a reason why" MvR was shot down, as if he were some invincible god. I.e., he must have been unwell, must have had PTSD, on 21 April had "violated his personal combat tactics" (he had not), etc. Baloney. He had flown a short distance over enemy lines at low altitude, chasing a lone plane by himself--these are things he had done many times before. The last time he did so, he caught a bullet. C'est la guerre.

Share this post


Link to post
Share on other sites

  • Similar Content

    • By VonS
      INSTALLING WOFF BHAH 2 IN (CLASSIC) WINESKIN ON A MAC AND/OR THEN TRANSPLANTING THE ENTIRE INSTALL TO WINDOWS 10 BOOTCAMP (info. added May 3, 2021)   Directions below should be followed, first to install WOFF BH&H 2 in WineSkin on a Mac, and then (optionally) to transplant the OBDSoftware\WOFF folder to Windows 10 in Bootcamp. This will allow for a BH&H 2 install to co-exist with previous WOFF installs in Windows, and also makes use of the same settings/keys file, to minimize installation and tweaking hassle for us Mac-heads.   The steps below assume that you already have an older version of WOFF running in WineSkin on your Mac - because such an older install in WineSkin is necessary to have for the full installation, and testing, of BH&H 2, to complete itself (otherwise the install will fail). These steps also assume that you are familiar with the installation steps, instructions, jargon, etc., located under the long WOFF-on-a-Mac post that is available under the WOFF threads on SimHQ.   (Those who do not have a previous version of WOFF installed in classic WineSkin, which is necessary for all of the steps below to be completed, are recommended instead to try either a direct install of BH&H 2 in Win10 on the Bootcamp side/partition of a Mac, or to try installing BH&H 2 into newer WINE wrappers available via the unofficial and newer WineSkin fork available at https://github.com/Gcenx/WineskinServer.)   STEP ONE: go to https://sourceforge.net/projects/wineskin/ and download the latest classic, wineskin winery (ver. 1.7 as of this writing), via the green "download" button there   STEP TWO: double-click on the program; in the menu that opens click on the plus sign to the left of "new engines available," and in the list that then opens choose WS9Wine1.7.7, download it, and then - when you're back in the main menu - choose "create new blank wrapper" (now wait about 3-4 minutes for your Mac to make the custom wrapper; once finished, the wrapper will be placed in an Applications folder that has been made inside your user folder on OS X and/or macOS)   STEP THREE: double-click on the wrapper once again and choose "install software" in the main menu; then "choose setup executable" in the next window that opens and locate your exe file for WOFF BH&H 2 that you purchased; now let the wrapper do its thing to install the game   STEP FOUR: once installed, the wrapper will go back to the main menu and you can click "quit" (it may also prompt you to locate the program before it drops to the main menu, the program in this case being the exe file of the game that was just installed - best thing at this point is just to leave this alone and close that window, if it doesn't drop to the main menu automatically)   STEP FIVE: once the wrapper has quit, don't double-click on it but "right-click" it and choose the option in the popup menu on OS X and/or macOS that says "show package contents" (this will open the wrapper's folder and should list something like a contents folder, the alias to its c drive, and an app/icon called WineSkin); double-click on the app named WineSkin and you will open the main menu window again, of the wrapper; and choose "advanced"   STEP SIX: under the advanced menu, to the right of the box called Windows EXE (that contains a file path), click on "Browse"; this will open up your finder on OS X and/or macOS, and then you can scroll to your desktop or downloads folder on your Mac; look for the latest patch for WOFF BH&H 2 that you should have downloaded separately, from the official WOFF website, and choose that updater exe installer (click "choose"); then you're back in the WineSkin advanced menu with the proper file path for the update patch's exe now listed in the box near the top of the window; now quit that WineSkin preferences window and go back to the main WineSkin app that you previously created - and then double-click on the main WineSkin app icon so that a window opens and which will allow for an installation of the latest update patch to happen (follow directions that pop up in the relevant window, to install the WOFF BH&H 2 update patch); once the process has completed, quit the main WineSkin program again, if it does not close automatically   STEP SEVEN: right-click on the main WineSkin wrapper once again, choose "show package contents," and then double-click once more on that secondary WineSkin icon/wrapper mentioned in STEP FIVE above; under its "advanced" menu, to the right of the box called Windows EXE (that contains a file path), click on "Browse"; this will open up your finder on OS X and/or macOS, and then you can scroll into the "drive_c" of the wrapper into which you installed WOFF BH&H 2 and then patched it to its latest version; in "drive_c" look for "OBDSoftware\WOFF" and scroll into there, and keep scrolling until you find "WOFF.exe," and choose that (click "choose"); then you're back in the WineSkin advanced menu with the proper file path for the game's exe now listed in the box near the top of the window; now close that secondary WineSkin wrapper window   STEP EIGHT: copy or move the now updated OBDSoftware\WOFF folder that resides in that WineSkin wrapper to your desktop; the WOFF folder is found by right-clicking on the main WineSkin wrapper and choosing "show package contents"; the package is located within the "drive_c" folder, by the way   STEP NINE: now locate the WineSkin wrapper for your earlier edition of WOFF, double-click on it and select "show package contents," and navigate to the relevant "drive_c" directory to locate the OBDSoftware\WOFF folder that corresponds with that older variant of WOFF; rename that folder to something like OBDSoftwareOld\WOFF and move it to your desktop; now copy over, to that location instead, the fresh OBDSoftware\WOFF folder that corresponds with BH&H 2, from your desktop   STEP TEN: copy and replace the OBDSoftware\WOFF\OBDWW1 Over Flanders Fields\campaigns\CampaignData\Pilots folder in your fresh BH&H 2 folder (that should be in the older WineSkin wrapper by now, as explained in the previous step) with the same folder from OBDSoftwareOld\WOFF that is now on your desktop (this is an important step; otherwise, BH&H 2 will not open in WineSkin unless this older Pilots folder transplant is done)   STEP ELEVEN: now close all unnecessary WineSkin windows and double-click the main WineSkin wrapper icon for your earlier edition of WOFF but that now contains the newer OBDSoftware\WOFF folder with the transplanted CampaignData\Pilots folder; allow BH&H 2 to open; recommended is to fly one quick combat mission or one of the other instant missions available, to allow all necessary files to populate successfully in your install; congratulations!, you now have a successful WOFF BH&H 2 install running in (classic) WineSkin; you may now quit WOFF BH&H 2   STEP TWELVE: optional at this point, if you like, is to copy the now functioning and tested WOFF folder that resides in your BH&H 2 WineSkin install (the one located at OBDSoftware\WOFF), to a Windows 10 partition on your Mac, or perhaps to another Mac (or Windows machine) where you already have an older version of WOFF installed; there will be no need to un-install that older version of WOFF that resides in Windows; simply rename that older version to something like WOFF UE or WOFF PE, in order to run BH&H 2; if you want to run the older version of WOFF again, rename the newest WOFF folder to something like WOFF BH2, and the older one simply to WOFF, and the old version then becomes functional; both installs will coexist happily, and will also use the same keys/settings located under AppData\Roaming\OBD_Games\OBDWW1 Over Flanders Fields (recommended, however, is to map extra keys for Lewis gun loading/reloading into the older WOFFKeys.xca file that you have, for full, functional use of that gun in BH&H 2)   NOTES: Don't forget to swap back your older OBDSoftware\WOFF folder into your WineSkin WOFF wrapper, on your Mac, if you will not be running BH&H 2 in WineSkin but only in Windows; or, make a copy of your functional WineSkin install instead, place the older WOFF folder into that wrapper, and enjoy running multiple versions of WOFF that way too, directly in OS X/macOS (recommended is to give the multiple WineSkin wrappers different names, to avoid confusion, if you choose such a setup); no guarantees that the instructions posted above will result in a stable install of WOFF BH&H 2 on your Mac, but there is a fine chance that careful following of the instructions will result in a good install   ----- ADDENDUM: WOFF BHAH2 BOTTLING (Brief Illustrated Tutorial; info. added May 4, 2021)
      Please find included below some tutorial pics. for how to install/extract WOFF BH&H2 into an empty WineSkin bottler that should first be optimized for WOFF BH&H2 bottling and that runs well on Mac OS X versions 10.5 to 10.12 (for macOS versions 10.13 and higher, recommended instead is to see the unofficial WineSkin port for Macs at https://github.com/Gcenx/WineskinServer). Bottler not supplied for download here; recommended is to make your own either via classic WineSkin, and then to install BH&H2 as specified in the pics. below, or to install/bottle via a newer WineSkin as per the link given immediately above.
      The "BH&H2 Bottler" in my case, on my Mac Mini, has been set to Windows 7 compatibility, with WINE Wrapper version 2.6.2, and WINE Engine WS9WINE1.7.7. No WineTricks have been installed because this wrapper ONLY installs WOFF BH&H2, and individual patches for BH&H2, into ready and transportable form, but does not serve up a functional, running BH&H2 install within the wrapper itself.
      To set up a functional, running install of BH&H2, proceed to look carefully over the final illustrated instruction set provided below, and as well do read over the more thorough installation directions located under this relevant WOFF-on-Mac post (above) or the longer one on SimHQ that also covers installation info. regarding WOFF UE/PE before focusing on BH&H2.
      NOTE: Successful transporting of a functional, running install of BH&H2 onto a Win10 partition on your Mac (should you choose not to run BH&H2 in WineSkin) - requires that you also, already have an older version of WOFF installed on the Win10 partition/drive, since that older version has created the necessary Windows registry files for WOFF, as well as other necessary folders that contain keyboard/joystick customizations for WOFF, etc.
      Happy bottling, transporting, and flying of WOFF BH&H2,
      Von S 
       
      Classic WineSkin Main Window - Use "Install Software" button to install BH&H2 and all relevant update patches

       
      Right-Click Maneuver - After BH&H2 has been installed and patched, right-click and choose "Show Package Contents," to display directories

       
      Navigating to C Drive - Double-click on the "drive_c" alias to enter the c drive main level directory

       
      Locating the "OBDSoftware" Folder - The relevant folder will be located inside the main level, c drive directory (see further explanations provided on the pic.)*

       
      * Recommended is to keep a copy somewhere on your Mac of such a bottled, patched, but non-functional WineSkin wrapper with BH&H2 installed and patched inside it - this way you may patch/update the bottled version whenever new patches come out, and then carefully follow the same procedures as explained in the pic. immediately above this note, in order to be able to fly the latest version of BH&H2 either in WineSkin wrappers or in your Win7/8.1/10 Bootcamp partitions.
    • By VonS
      Hello fellow WOFFers,
      Thought I’d open this separate thread for a future mods-compatibility list for the ver. of BH&H 2 (WOFF) that will be released soon. Becker is welcome to make use of this thread for his long mods-compatibility list that is currently hosted on the WOFF threads over on SimHQ. I will also use this thread to update regarding my FM mods., GPU Tuner Patch, etc., in the future and time-permitting.
      For convenience and simplicity, I encourage everyone who is a member/user of CombatAce to post mods-related questions for BH&H 2 WOFF under this thread, since it will be easier to find mod-compatibility info. that way. While most WOFF-related mods. are available via Sandbagger’s site for WOFF addons, this thread will hopefully prove helpful for compatibility questions, info. regarding release of new mods. not hosted on Sandbagger’s site, etc. - and ideally will become a centralized hub for mod-related topics since there are too many mod-related threads over on the SimHQ forums for WOFF and it becomes confusing/discouraging to navigate for new WOFF fliers who might wish to load up quickly on WOFF goodies and fly.
      OBD, feel free to delete this thread if you will be posting a separate stickied thread for mod-compatibility questions, etc.
      For those interested in downloading my FM tweaks packages for the Ultimate and Platinum Eds. of WOFF, as well as GPU Tuner Patches for the Platinum Ed., including for WOTR Phase One, and the small FM tweaks package for WOTR Phase One - please see the link included immediately below. Those WOFF-related packages are not compatible with the latest, BH&H 2 edition unless otherwise indicated in this thread. I am currently busy with work and other duties, so my limited modding time will be devoted only to First Eagles 2 for the foreseeable future.
      Tweaks Packages for Previous Eds. of WOFF, etc.
      EDIT: to find my previous and current mods packages for WoFF/WoTR, click on my propeller icon here on CombatAce to go to my main profile page. Once there, click on the "about me" tab to find all relevant info. and mod download link(s).
      Cheers all,
      Von S 
    • By Kodokushi
      I created a deck to use with the Matric Android app to control WINGS OVER FLANDERS FIELDS: BETWEEN HEAVEN & HELL II.
      Intro
      I'm so new to the game that I still don't know just what I don't know about playing it I have a little bit of flight sim experience in the past but having recently read the remarkable book Marked for Death  byJames Hamilton-Patterson I used google to learn more about WWI flight, found WOFF and jumped in running. I've never been fond of using a keyboard to enter sim commands I'm grateful for this forum, it's been instrumental in helping me get started, my thanks to everyone who has contributed. I'm not affiliated with Matric app in any way, I'm just a guy trying to figure things out The Matric App
      Their Website http://matricapp.com/ All edits are done on the desktop app that is a free download  The mobile app communicates with this desktop app to work with your game (Or photo editor, videos, music, etc. etc. Matric is useful beyond gaming) Google Play Store on Android phone or tablet to get the mobile app.  Cost for the app is scaled based on what you can either afford or how much you value it ranging from $12.99 to $19.99 you choose how much you  pay. I use a Kindle Fire tablet that I found a work around to get the Play Store on How I use Matric in WOFF
      I set up my deck to have everything I didn't have set up already on other devices (you may see buttons you don't need or need more but this is easily editable)  I use SmoothTrack Face Tracking App on my Android phone with Opentrack on my computer so I didn't need the eye movement commands As an aside, I have tried many setups and this is the best inexpensive solution I have found for face tracking I had trouble with my VKB Gladiator NXT Joystick so I pulled an old Logitech Extreme 30 Pro joystick out and started using it.  I think the Gladiator issues are related to some setup I was doing for IL2 and not related to WOFF, I will dedicate the time later to getting it going in WOFF but the Logitech works fine for now. the Logitech has a few commands on it, these are not on my Deck I changed a handful of commands while playing around with setup, please be aware if you download my deck that the following are not standard WOFF commands: Fixed Views Toggle Control+NumberPad5 Select Next Weapon Conrol+NumberPad2 Right Rudder Trim Control+NumberPad6 Left Rudder Trim Control+NumberPad4 Increase Time Compression Control+Semicolon Quality Control If you find an error in my deck, please share it here, I haven't even pushed every button in game yet. Future Plans
      I expect my decks to change quite a bit as I learn. Some buttons will be removed, some changed in look or groupings.  Dedicated decks built for given plane types that have identical or very similar commands, removing commands that do not apply to those planes Move buttons that are needed to access quickly (Combat) in sizing and location to fit my needs as I learn I already have Blip button and unjam guns at the edge of the screen and large in anticipation of needing them quicker I can see moving or copying the Wingman commands to the Weapon and Combat page to access them in the heat of battle without changing pages Decks for realistic flying without any navigation buttons, just the bare basics after I get competent Add maps as pages to decks, they will not be scrollable, but multiple pages that are static maps (images) can be added.  Area around landing field for sure As much of the engagement area as possible as additional pages I hope that some of you here use Matric and contribute your work so that I can implement your improvements into my own setup. If there is another option for this type of tablet based game control that is inexpensive I'd love to hear your experience. For now I can't think of anything that would make me change but I try to keep an open eye as to what is out there. Get my Deck for Free if you have Matric
      Kodokushi WOFF BHAH2 Flanders Field 1.1.2022 Deck • Matric (matricapp.com) Or seach 'Kodokushi' from the desktop Matric app  I plan to date my decks as I update them and will try to keep on top of removing the older decks if they seem obsolete compared to newer efforts  




×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..