Jump to content
Sign in to follow this  
MigBuster

I was sitting on top of a flying A-6

Recommended Posts

The story of a lucky Intruder crew member who survived a partial ejection from a KA-6D

 

New Picture.jpg.png

 

From: http://theaviationist.com/2014/08/06/ka-6d-partial-ejection/

 

This things happen once every some million flights.

 

The KA-6D was a tanker version of the A-6 attack aircraft obtained by converting existing Intruder airframes: radar and bombing equipment were removed and replaced with an internal hose-and-reel refueling package, with the drogue fairing protruding from underneath the rear fuselage.

A total of 90 KA-6Ds were produced by Grumman for the U.S. Navy.

One of the most famous events that involved a KA-6D during its operational life spanning from 1963 to 1997, took place on Jul. 9, 1991 to a VA-95 Green Lizard Intruder during an aerial refueling mission overhead its aircraft carrier, the USS Abraham Lincoln (CVN-72).

On that day, Lt. Mark Baden and Lt. Keith Gallagher, who were the pilot and the bombardier and navigator (BN) of the Intruder “Lizard 515”, experienced a very unusual incident: a partial ejection from the aircraft. Both the crew members released their accounts of the mishap to Approach Magazine in November 1991 and the full story is today reported on www.gallagher.com.

 

Gallagher himself explains: “Murphy’s Law says, “Whatever can go wrong, will, and when you least expect it.” (And, of course, we all know that Murphy was an aviator). […]  Fortunately for me, however, he failed to follow through. On my 26th birthday I was blindsided by a piece of bad luck the size of Texas that should have killed me. Luckily, it was followed immediately by a whole slew of miracles that allowed me to be around for my 27th. We were the overhead tanker, one third of the way through cruise, making circles in the sky. Although the tanker pattern can be pretty boring midway through the cycle, we were alert and maintaining a good lookout doctrine because our airwing had a midair less than a week before, and we did not want to repeat.”

 

After the third fuel update call, Lizard 515 aircrew decided that the left outboard drop was going to require a little help and as recommended by NATOPS (which is The Naval Air Training and Operating Procedures Standardization program, responsible for rules and regulations governing safe and correct operation of all naval aircraft), they applied positive and negative Gs to force the valve open.

 

As explained by Gallagher, when the pilot moved the stick forward: “ I felt the familiar sensation of negative “G”, and then something strange happened: my head touched the canopy. For a brief moment I thought that I had failed to tighten my lap belts, but I knew that wasn’t true. Before I could complete that thought, there was a loud bang, followed by wind, noise, disorientation and more wind, wind, wind. Confusion reigned in my mind as I was forced back against my seat, head against the headrest, arms out behind me, the wind roaring in my head, pounding against my body. “Did the canopy blow off? Did I eject? Did my windscreen implode?” All of these questions occurred to me amidst the pandemonium in my mind and over my body. These questions were quickly answered, and replaced by a thousand more, as I looked down and saw a sight that I will never forget: the top of the canopy, close enough to touch, and through the canopy I could see the top of my pilot’s helmet. It took a few moments for this image to sink into my suddenly overloaded brain. This was worse than I ever could have imagined – I was sitting on top of a flying A-6!”

 

The sensations experienced by Gallagher during this wild ride were extreme: “I couldn’t breathe. My helmet and mask had ripped off my head, and without them, the full force of the wind was hitting me square in the face. It was like trying to drink through a fire hose. I couldn’t seem to get a breath of air amidst the wind. My arms were dragging along behind me until I managed to pull both of them into my chest and hold them there.”

While he was still trying to breathe, Gallagher thought that Baden would never have tried to land and he decided to start the ejection sequence once again: “I grabbed the lower handle with both hands and pulled-it wouldn’t budge. With a little more panic induced strength I tried again, but to no avail. The handle was not going to move. I attempted to reach the upper handle but the wind prevented me from getting a hand on it. As a matter of fact, all that I could do was hold my arms into my chest. If either of them slid out into the wind stream, they immediately flailed out behind me, and that was definitely not good.”

 

In the meanwhile, Baden contacted the aircraft carrier: “Mayday, Mayday, this is 515. My BN has partially ejected. I need an emergency pull-forward!”

The reply arrived immediately: “Roger, switch button six.”  

 

Baden switched to the UHF frequency preset on Channel 6 and said “Boss (the Air Officer who has to rule the flight deck), this is 515. My BN has partially ejected. I need an emergency pull-forward!” 

 

The Boss replied: “Bring it on in.” At this point Baden looked at his BN’s legs still moving and understood that Gallagher was not dead. So when the Boss came up and asked if the BN was still with the aircraft, Baden replied “Only his legs are still inside the cockpit.” Fortunately, the Boss understood what Baden meant and asked him if he was heading to the aircraft carrier for landing. When Baden confirmed he was returning to “homeplate,” the Boss told him that the aircraft carrier was ready to recover Lizard 515. 

 

But Gallagher’s conditions were really frantic: “The wind had become physically and emotionally overwhelming. It pounded against my face and body like a huge wall of water that wouldn’t stop. The roaring in my ears confused me, the pressure in my mouth prevented me from breathing, and the pounding on my eyes kept me from seeing. Time had lost all meaning. For all I knew, I could have been sitting there for seconds or for hours. I was suffocating, and I couldn’t seem to get a breath. I wish I could say that my last thoughts were of my wife, but as I felt myself blacking out, all I said was, “I don’t want to die.”

While Baden headed to the USS Abraham Lincoln, he thought that he didn’t want to perform a perfect landing (the footage of which can be seen in the video below): “I had no intention of passing up any “perfectly good wires.” I touched down short of the 1-wire (the perfect carrier landing is dubbed OK 3 and it took place when the pilot engages the third of four wires placed on the carrier deck) and sucked the throttles to idle. The canopy shards directly in front of the BN’s chest looked like a butcher’s knife collection. I was very concerned that the deceleration of the trap was going to throw him into the jagged edge of the canopy.” Then after the landing Baden realized that Gallagher was still alive when he said: “Am I on the flight deck?”

 

 

 

When Baden and Gallagher knew what really happened, it became obviously how much the Intruder BN had been lucky.

Gallagher’s parachute had deployed and wrapped itself around the tail section of the plane then the timing release mechanism had fired and released the BN from the seat. The only things holding him attached to the plane were the parachute straps.

 

For this well executed emergency landing Lt. Mark Baden was awarded the Air Medal for his decisive action on that day and the LSO (Landing Signal Officer), LCDR Mike Manazir, received the “Bug Roach Paddles Award” for his part in the recovery.  The crew of the Lincoln was recognized for a well-executed emergency pull-forward – LT Baden had the jet on deck about six minutes after the emergency began.

 

The Captain of the Lincoln would later read over the PA system, a portion of a letter written by Michelle Gallagher (LT Gallagher’s wife) where she thanked the crew of the Lincoln for saving her husband’s life, while the injuries suffered by the BN were later described by Gallagher himself: “My most serious injury was that 1/2 my right arm (the shoulder, bicep, and forearm) was paralyzed due to a stretched nerve in my shoulder. In addition, my left shoulder was damaged as well. I have all of the damage of someone who dislocated his shoulder, but it was not dislocated when I landed. My supposition is that it dislocated, and popped back in upon landing. Other than that, I was just extremely beat up. Via physical therapy, I recovered within 6 months. My right shoulder “came back” in about 1 month, my forearm in about 2-3 months, and my bicep returned in about 4-5 months. I had to re-do all of my physiological qualifications (swimming, etc) to prove that I was OK, but I flew again 6 months to the day after the accident.”

 

 

 

 

 

New Picture (1).jpg

  • Like 1

Share this post


Link to post
Share on other sites

Holy Crap! :fie:

 

Quite a story. Thanks for sharing.

Share this post


Link to post
Share on other sites

The ejection system didn't fire, or accidently went off. At the top of the seat there is a weighted piece of metal that  failed which breaks the canopy open. the momentum of this weight pulled the seat part way through the canopy.  The weight was jarred loose over several years of positive and especially negative Gs. A very good job getting it back aboard.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By GKABS


      View File A-6C Intruder 
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6C Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - TRIMM_pod
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, making new texture sets, fixed collision points, and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general. and finally reworked my TRIMM_pod and made it a totally new one.
      I thank you for everything. 
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 10/16/2024 Category A-6  
    • By GKABS


      View File A-6B mod0 & mod1 Intruder 
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6B mod0 and mod1 Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, I thank you for everything. 
      yakarov79: for making new texture sets.
      By yakarov79
      fixed collision points and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general.
      new skins with new bump maps and specular maps,  so nothing old will work now.
      I used my LAU-7 instead of that old one. now it has the correct proportions to AIM-9,
      I made a new launcher for AGM-12 and AGM-45 - Aero5A now weapons are properly attached to the launcher...
      added some small bits in the model and fixed some mapping issues,
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 07/20/2024 Category A-6  
    • By GKABS


      View File A-6A Late Intruder 
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6A late Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, I thank you for everything. 
      yakarov79: for making new texture sets.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      1.0.1
      By yakarov79
      fixed collision points and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general.
      new skins with new bump maps and specular maps,  so nothing old will work now.
      I used my LAU-7 instead of that old one. now it has the correct proportions to AIM-9,
      I made a new launcher for AGM-12 and AGM-45 - Aero5A now weapons are properly attached to the launcher...
      added some small bits in the model and fixed some mapping issues,
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      SKins represent pre-Vietnam War squadrons. First user VA-42 they were first in Intruder and was taking care of conversion and training for the US Navy. The second skin is for VA-75 short deployment, first for USS Independence and first for VA-75 on Intruder. Later in 1965, they deployed to Vietnam.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 04/16/2024 Category A-6  
    • By GKABS


      View File A-6A Early Intruder
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6A Early Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD

      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.4

      -Two new skins
      -3d max model fix
      -Resized the pilot
      -Other fixes (too many to list
      -Data fix
      1.0.3
      - Fixed some issues with the model
      - Resized the engine intake
      - Fixed the size of the DRAFairing_AA
      - Added right-side exhaust pipe
      - Added cockpit top lights and misc.
      - Fixed some data file issues.
      1.0.2
      - Fixed GroupLimit=" entry thanks to Svetlin
      - Added MER entries under weapons thanks to Svetlin
      - Fixed some entries in the data file thanks to Cliff7600
      - Fixed the AOA so they don't show in flight.
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      Coupi: for making the data files and FM and the skin.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, I thank you for everything. 
      yakarov79: for making two new texture sets.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 03/22/2024 Category A-6  
    • By GKABS
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6C Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - TRIMM_pod
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, making new texture sets, fixed collision points, and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general. and finally reworked my TRIMM_pod and made it a totally new one.
      I thank you for everything. 
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..