Squadron patch woes

[+Trotski 844]

Hi there, just a quick question, one I am sure I have seen asked and answered somewhere before, however I can't seem to find it, so I am going to ask anew so to speak. basically my problem is this, I am currently faffing about with various Aircraft, to create skins and markings for both the Dhimar, and the Paran Airforces, but I seem to have run into a peculiar issue, I have been adding squadron patches, and or numbers to the noses of various aircraft, and when I go test it, to see where I have stuff placed etc. they absolutely refuse to show up, unless I then quit out of the mission, whatever mission it may be, then re fly and first go into the weapons load out screen, then, on exiting and then flying the missions, all of a damn sudden, just like freakin' magic, the damn things are there, in all their splendour, and correctly positioned etc. Anyhow, my question is, does anyone have an inkling as to why this happens, and how to prevent it from occurring as it is rather tiresome and one is getting rather irritated, so much so I may have to squash a grape, or even jump of a dolls house....any help and or explanation's will be much appreciated.

[Wrench 9,659]

how are you setting up the decals?

meaning, what Level= are you using??

[+Trotski 844]

Level 1

 

[Decal001]
MeshName=wing_outer_L
DecalLevel=0
DecalFacing=TOP
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIROUNDEL
Position=-3.92,-0.38
Scale=0.8
DecalMaxLOD=3

 

[Decal002]
MeshName=wing_outer_R
DecalLevel=0
DecalFacing=TOP
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIROUNDEL
Position= 3.92,-0.38
Scale=0.8
DecalMaxLOD=3

 

[Decal003]
MeshName=wing_outer_L
DecalLevel=0
DecalFacing=BOTTOM
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIROUNDEL
Position=-3.92,-0.38
Scale=0.7
DecalMaxLOD=3

 

[Decal004]
MeshName=wing_outer_R
DecalLevel=0
DecalFacing=BOTTOM
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIROUNDEL
Position= 3.92,-0.38
Scale=0.7
DecalMaxLOD=3

 

[Decal005]
MeshName=boom_L
DecalLevel=0
DecalFacing=LEFT
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIBARS2
Position=-2.60,0.25
Rotation=5.0
Scale=1.15
DecalMaxLOD=3

 

[Decal006]
MeshName=boom_R
DecalLevel=0
DecalFacing=RIGHT
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIBARS2
Position=-2.60,0.25
Rotation=355.0
Scale=1.15
DecalMaxLOD=3

 

[Decal007]
MeshName=vertical_tail_R
DecalLevel=0
DecalFacing=RIGHT
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIFINFLASH2
Position=-5.30,1.03
Rotation=0.0
Scale=0.45
DecalMaxLOD=3

 

[Decal008]
MeshName=vertical_tail_L
DecalLevel=0
DecalFacing=LEFT
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIFINFLASH2
Position=-5.30,1.03
Rotation=0.0
Scale=0.45
DecalMaxLOD=3

 

[Decal009]
MeshName=nose_gear_door_2
DecalLevel=2
DecalFacing=BOTTOM
FilenameFormat=SOVIETYELLOWNUM
Position=0.0,2.9
Rotation=0.0
Scale=0.20
DecalMaxLOD=3

 

[Decal010]
MeshName=boom_R
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=ARABIC3WHITE
Position=-3.70,0.34
Rotation=355.0
Scale=1.0
DecalMaxLOD=3

 

[Decal011]
MeshName=boom_L
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=ARABIC3WHITE
Position=-3.70,0.34
Rotation=5.0
Scale=1.0
DecalMaxLOD=3

 

[Decal012]
MeshName=Nose
DecalLevel=1
DecalFacing=LEFT 
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIPATCH2
Position=1.68,-0.02
Scale=0.2  
DecalMaxLOD=3

 

[Decal013]
MeshName=Nose
DecalLevel=1
DecalFacing=RIGHT 
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIPATCH2
Position=1.68,-0.02
Scale=0.2  
DecalMaxLOD=3

 

DECAL 012 and 013 being the offending articles.

[+Nyghtfall 2,152]

I would say just change your DecalLevel to 3 on decals 12 and 13, otherwise patches are used according to nations.ini. That means they have to carry the number of your nation and maybe placed in the root of the decalsfolder.

Edited January 9, 2016 by Nyghtfall

[Wrench 9,659]

iirc, Level 3 is kill markings

 

level 1 decals ONLY work when selecting the squadron AND the squadron has to be listed in the Squadronlist ini.

 

otherwise, the simplest way is how I've done --

just make them Level = 0

[+Trotski 844]

Hmmm the thing is, they actually do work, but only if you go into weapons loading first, if you don't do this, then they will refuse to display, however on going and adding weapons or whatever, on exit from that screen they do display, its weird, had the issue on other skins I have messed with too, and its only ever the squadron patch ....very odd indeed, not world shatteringly important I know but you get my point.

Ok I shall try the level 0 option then, as I haven't started messing with Squadronlist ini's yet......    

[Spinners 15,984]

Wrench is correct. The game/sim has no 'in built' Dhimari or Parani squadron markings so Level 0 and the correct filepath will get the decals to show.

[+Trotski 844]

Well bugger me sideways, that's sorted it, I knew it had to be something bloody simple....thanks mate !!!

[+Trotski 844]

And here is my pride 'n joy with all the decals in the right place....blah blah blah......seriously, thanks for the help, I was going nutz lol

[Wrench 9,659]

are they both supposed to face forward??  If so, on the right side do this (change in BOLD)

 

 

[Decal013]
MeshName=Nose
DecalLevel=0
DecalFacing=RIGHT 
FilenameFormat=Vampire F.52 (LAMIA)/Desert Camo/DHIMARIPATCH2
Position=1.68,-0.02
Scale=0.2 

Reverse=TRUE 
DecalMaxLOD=3

 

 

(or for whichever side is the correct front facing)

[+Trotski 844]

Oh yeah, forgot to do that bit...cheers