RustyKurnass Posted March 26, 2020 Posted March 26, 2020 Hi all guyys, is quite some times now than I wonder about a RWR in the Nesher. If I remember well,it was present in WOI and after all,the fin' leading edge of the planes had a RWR receiwer,so I wonder if at least an aural tone will be present. This will be a very useful thing in the Yom Kippur campaign.... Stay safe guys. Gianni 1 Quote
Wrench Posted March 26, 2020 Posted March 26, 2020 aint nothing too it! (from the guy that invented the audio=only RWR 'way in the 2000s.) extract the avionics ini fro the Nesher from whatever cat it's in. Also, extract the data ini -- it'll need updating too. place both in the Nesher's aircraft folder open the avionics ini, and add the following lines: [RWR] Type=AUDIO_ONLY TrackSound=RWRTrackSound.wav LockSound=RWRLockSound.wav [RWRTrackSound] Priority=HIGH 3DSound=FALSE Looped=TRUE NumBuffers=1 [RWRLockSound] Priority=HIGH 3DSound=FALSE Looped=TRUE NumBuffers=1 save, and close open the Nesher's data ini, and in the DetectSystem section ---> [DetectSystem] Name= RadarType=RANGING VisualBlindArc=5,6,7 VisualRestrictedArc=4L,8L MaxVisibleDistance=7200.0 HasRWR=FALSE change the FALSE to TRUE. this will give you the beeps! (no direction, but it'll tell you when something is looking at you, and when they shoot) 3 Quote
RustyKurnass Posted April 2, 2020 Author Posted April 2, 2020 Hello all guys, how are you? All safe and healty I hope. Despite not related to this topic, I 'll ask help for a small thing. I've installed SF2Viet Exp Gold + all the patches + VPAF Exp;now,with the F-105D_66 independently from what I load on the outer pylons I've the Aim-9 rails mounted and ,curiously, when the 'winders're on,the rail don't show... Any help? Obviously the game is full merged and patched at July 2013 P.S. Even if I've installed only now the Gold edition + the other mods for SF2V I 'll thanks yo all for the great job, there're even the formation take off!!!! Quote
Wrench Posted April 2, 2020 Posted April 2, 2020 check the load ini, and see if the RackType= name is there, and then check the /Weapons folder for that rack. If it's missing, you might need to hunt it down. Or tell us the name and we'll try and get it to you. Quote
RustyKurnass Posted April 3, 2020 Author Posted April 3, 2020 Thanks Wrench. I checked and rechecked but there aren't any Rack lines in both the F-105D and the -105D_66 // Station 1 = Left Outer // Station 2 = Right Outer // Station 3 = Left Inner // Station 4 = Right Inner // Station 5 = Centerline // Station 6 = Left Outer AIM-9 // Station 7 = Right Outer AIM-9 [AirToAir] Loadout[06].WeaponType=AIM-9B Loadout[06].Quantity=1 Loadout[07].WeaponType=AIM-9B Loadout[07].Quantity=1 [AirToAirLongRange] Loadout[03].WeaponType=Tank450_F105 Loadout[03].Quantity=1 Loadout[04].WeaponType=Tank450_F105 Loadout[04].Quantity=1 Loadout[06].WeaponType=AIM-9B Loadout[06].Quantity=1 Loadout[07].WeaponType=AIM-9B Loadout[07].Quantity=1 [Attack] Loadout[01].WeaponType=CBU-24B Loadout[01].Quantity=1 Loadout[02].WeaponType=CBU-24B Loadout[02].Quantity=1 Loadout[03].WeaponType=Tank450_F105 Loadout[03].Quantity=1 Loadout[04].WeaponType=Tank450_F105 Loadout[04].Quantity=1 Loadout[05].WeaponType=CBU-24B Loadout[05].Quantity=4 Loadout[05].RackType=MER What look strange to me is that in the Load inis are present lines for 7 pylons but in the Data inis there're only five pylons, the Winders' ones are omitted, can be these the problem? // Weapon Stations --------------------------------------------------------- [LeftWingStationOuter] SystemType=WEAPON_STATION StationID=1 StationGroupID=1 StationType=EXTERNAL AttachmentPosition=-4.26,-3.27,-0.06 AttachmentAngles=0.0,-4.0,0.0 LoadLimit=500 AllowedWeaponClass=BOMB,ARM,EP,RP,IRM,CGR,EOGR AttachmentType=NATO,USAF ModelNodeName=pylon_outer_L PylonMass=59.88 PylonDragArea=0.04 [RightWingStationOuter] SystemType=WEAPON_STATION StationID=2 StationGroupID=1 StationType=EXTERNAL AttachmentPosition=4.26,-3.27,-0.06 AttachmentAngles=0.0,-4.0,0.0 LoadLimit=500 AllowedWeaponClass=BOMB,ARM,EP,RP,IRM,CGR,EOGR AttachmentType=NATO,USAF ModelNodeName=pylon_outer_R PylonMass=59.88 PylonDragArea=0.04 [LeftWingStation] SystemType=WEAPON_STATION StationID=3 StationGroupID=2 StationType=EXTERNAL AttachmentPosition=-3.27,-2.32,-0.16 AttachmentAngles=0.0,-4.0,0.0 LoadLimit=1600 AllowedWeaponClass=BOMB,ARM,EP,TER,MER,RP,FT,CGR,EOGR AttachmentType=NATO,USAF ModelNodeName=pylon_inner_L PylonMass=108.41 PylonDragArea=0.06 FuelTankName=Tank450_F105 FuelTankNodeName=droptank450_L RackLimitOutsideOnly=TRUE [RightWingStation] SystemType=WEAPON_STATION StationID=4 StationGroupID=2 StationType=EXTERNAL AttachmentPosition=3.27,-2.32,-0.16 AttachmentAngles=0.0,-4.0,0.0 LoadLimit=1600 AllowedWeaponClass=BOMB,ARM,EP,TER,MER,RP,FT,CGR,EOGR AttachmentType=NATO,USAF ModelNodeName=pylon_inner_R PylonMass=108.41 PylonDragArea=0.06 FuelTankName=Tank450_F105 FuelTankNodeName=droptank450_R RackLimitOutsideOnly=TRUE [CenterlineStation] SystemType=WEAPON_STATION StationID=5 StationGroupID=3 StationType=EXTERNAL AttachmentPosition=0.0,-0.48,-0.76 AttachmentAngles=0.0,-4.0,0.0 MissileRollAngle=0.0 EjectVelocity=0.0,0.0,-2.0 LoadLimit=2100 AllowedWeaponClass=BOMB,TER,MER,FT AttachmentType=NATO,USAF ModelNodeName=pylon_center PylonMass=57.15 PylonDragArea=0.03 FuelTankName=Tank650_F105 FuelTankNodeName=droptank650 I know that in the Data the outer pylons are allowed to carry IRM but there no lines for the rack Quote
Blade Posted April 3, 2020 Posted April 3, 2020 8 hours ago, RustyKurnass said: What look strange to me is that in the Load inis are present lines for 7 pylons but in the Data inis there're only five pylons, the Winders' ones are omitted, can be these the problem? I know that in the Data the outer pylons are allowed to carry IRM but there no lines for the rack If these are the only weapon stations in your _Data.ini, then my guess is that you use an outdated file. The F-105D_66_Data.ini extracted from the latest version of the game includes 7 stations (6 & 7 are the AIM-9 stations). Remove the _Data.ini from your F-105D_66 folder. Quote
RustyKurnass Posted April 3, 2020 Author Posted April 3, 2020 (edited) Perfect! I've extracted the DATA from the stock Thuds and replaced the ones in the modded games and now is all perfect! Thanks a lot for the head- ups!!!! Love the community Edited April 3, 2020 by RustyKurnass Quote
RustyKurnass Posted April 6, 2020 Author Posted April 6, 2020 Hi guys, I hope you're all safe and in healt! In my SF2NA Med Crisis, the Lybian Mirages show the tanks this way Not only without skin, but over another tanks! The cause? Old file? If yes, how can solve this issue? Thanks all Quote
Wrench Posted April 6, 2020 Posted April 6, 2020 delete any old data inis. it's a glitch caused by the "built into the aircraft lods fuel tanks". Or extract and replace with a new one Quote
RustyKurnass Posted April 6, 2020 Author Posted April 6, 2020 1 hour ago, Wrench said: delete any old data inis. it's a glitch caused by the "built into the aircraft lods fuel tanks". Or extract and replace with a new one Extract from where? I far I know the Mirage 5D/DE isn't a TW plane. Quote
Wrench Posted April 6, 2020 Posted April 6, 2020 yes they are, 5E, 5DE, 5SDE they're all 3W birds. You can tell, as the fuel tank is built into the aircraft lod. they're from DLC 28. check inside the main ini, and you should see the lod description as: Quote [AircraftData] AircraftFullName=Mirage 5DE AircraftShortName=Mirage 5 AircraftDataFile=Mirage5DE_data.ini LoadoutFile=Mirage5DE_Loadout.ini UserList=Mirage5DE_UserList.ini [LOD001] Filename=Mirage5DE.LOD Distance=100 [LOD002] Filename=Mirage5DE_LOD2.LOD Distance=250 [LOD003] Filename=Mirage5DE_LOD3.LOD Distance=500 [LOD004] Filename=Mirage5DE_LOD4.LOD Distance=1000 [LOD005] Filename=Mirage5DE_LOD5.LOD Distance=10000 if not, then you've got some "homebuilt" thats conflicting with something. 1 Quote
RustyKurnass Posted April 7, 2020 Author Posted April 7, 2020 Thanks,extracting the files for the 5DE I solved the tanks isuue ( but not for the 5D...); but now the plane can't carry IRM on the outboard pylons. I checked the old DATA and there are the following lines: [LeftOuterWingStation2] SystemType=WEAPON_STATION StationID=12 StationGroupID=1 StationType=EXTERNAL AttachmentPosition=-3.07,-2.28,-0.83 AttachmentAngles=0.0,-3.0,0.0 LoadLimit=500 AllowedWeaponClass=IRM AttachmentType=NATO,FRANCE SpecificStationCode=MIRAGEIRM ModelNodeName=outer_pylon_L PylonMass=25.0 PylonDragArea=0.02 [RightOuterWingStation2] SystemType=WEAPON_STATION StationID=13 StationGroupID=1 StationType=EXTERNAL AttachmentPosition= 3.07,-2.28,-0.83 AttachmentAngles=0.0,-3.0,0.0 LoadLimit=500 AllowedWeaponClass=IRM AttachmentType=NATO,FRANCE SpecificStationCode=MIRAGEIRM ModelNodeName=outer_pylon_R PylonMass=25.0 PylonDragArea=0.02 [AIM-9B_RailLeft] SystemType=WEAPON_STATION StationID=14 StationGroupID=2 StationType=EXTERNAL AttachmentPosition=-3.07,-2.28,-0.83 AttachmentAngles=0.0,-3.0,0.0 LoadLimit=25 AllowedWeaponClass=FT AttachmentType=NATO,FRANCE ModelNodeName= PylonMass=5.0 PylonDragArea=0.04 FuelTankName=AERO-3C NoJettisionTank=TRUE [AIM-9B_RailRight] SystemType=WEAPON_STATION StationID=15 StationGroupID=2 StationType=EXTERNAL AttachmentPosition= 3.07,-2.28,-0.83 AttachmentAngles=0.0,-3.0,0.0 LoadLimit=25 AllowedWeaponClass=FT AttachmentType=NATO,FRANCE ModelNodeName= PylonMass=5.0 PylonDragArea=0.04 FuelTankName=AERO-3C NoJettisionTank=TRUE Are these lines tweaked by the modder? If yes,how restore? The simply copy and paste don't work and there're still have the tanks issue of the 5D Quote
RustyKurnass Posted April 7, 2020 Author Posted April 7, 2020 Ok, solved also for the IRM issue Waiting for the Mirage 5D "new" inis 1 Quote
Wrench Posted April 7, 2020 Posted April 7, 2020 yes, looks like it was messed with by the modder. it happens all the time Quote
Wrench Posted April 7, 2020 Posted April 7, 2020 don't know, I've flown it!! (ie: made it flyable) Quote
RustyKurnass Posted April 8, 2020 Author Posted April 8, 2020 We have one ( the same actually ) in the download section;I tried after downloading it to replace the inis but the problem is still here... Quote
+russouk2004 Posted April 8, 2020 Posted April 8, 2020 stock mirage 5d with all tanks and they are fine... Quote
RustyKurnass Posted April 8, 2020 Author Posted April 8, 2020 Yes...I've extracted the inis but there're difference with the pylons ( number,drag mass,ecc). I can readapt the stock Mirage 5F inis for the -5D ? Quote
Wrench Posted April 8, 2020 Posted April 8, 2020 sound like the one in the download section is made from something NOT 3W. Can you post the link? as time permits, I'll take a leak at it. Quote
RustyKurnass Posted April 8, 2020 Author Posted April 8, 2020 For sure! But is pratically the same of the SF2NA Med Crisis https://combatace.com/files/file/13390-mirage-5d/ Quote
Wrench Posted April 8, 2020 Posted April 8, 2020 thanks for the link! that also allows me to 'repair' the broken screenshots for the download. it looks like Paulo uses the stock Mirage 5D. I'd extract a new data and loadout ini from ObjectData007.cat. AFter looking it over, the 2 outer station don't have any provisions for IRMs. I think that's how the real birds (tm) are. I don't know if the "sidewinder rails" are built into the pylons or not. The LOD Viewer only shows "bomb rack" type attachments, so probably not. Conversely, on the Mirage 3 you can see the "magic_rail" on the outer pylon But, I'd extract them and see anyway. Although I doubt that if you load the IRM, it'll look 'right" Quote
RustyKurnass Posted April 11, 2020 Author Posted April 11, 2020 On 9/4/2020 at 12:20 AM, Wrench said: thanks for the link! that also allows me to 'repair' the broken screenshots for the download. it looks like Paulo uses the stock Mirage 5D. I'd extract a new data and loadout ini from ObjectData007.cat. AFter looking it over, the 2 outer station don't have any provisions for IRMs. I think that's how the real birds (tm) are. I don't know if the "sidewinder rails" are built into the pylons or not. The LOD Viewer only shows "bomb rack" type attachments, so probably not. Conversely, on the Mirage 3 you can see the "magic_rail" on the outer pylon But, I'd extract them and see anyway. Although I doubt that if you load the IRM, it'll look 'right" So mate,the stock bird can be tweaked in order to add the rails for the IRMs? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.