-
Similar Content
-
By GKABS
I decided to make a post so I can put all my work in one place I hope you okay with that.
Okay here is the update of the M978/M977 HEMTT more detail will be added but this is how it looks so far.
-
By Gepard
View File Panzerpack for Ukraine Terrain
Panzerpack for Ukraine terrain
*****************************************************
This mod is made for SF2.
----------------------------------------------------------
I.
This package contains some tanks which are, or will be in the next time, in use in Ukraine War.
This are:
For the Ukraine:
Leopard1A4 delivered by Germany
Leopard1A5 delivered by Germany
Leopard2A4 delivered by Canada, Spain and Norway
T-64B original ukrainian tanks, former soviet
T-72M1 delivered by Czech Republik and Poland
For Russia:
T-72B former soviet
T-72BV former soviet
The T-64B, the T-72 and the Leopard1A4 are repaints of the stock files made by TK.
The Leopard1A5 is a repaint of the tank which made Gabilon.
The Leopard2A4 is a repaint of the tank made by Kesselbrut.
Alle LOD files are low poly, which reduce the workload of the computer. With my new made skins the tanks are looking good enough.
The tanks are set for a timeframe from 2022 or 2023 onward. They will not appear earlier in the game.
I have adjusted the values of the armour to make it more real. I also devided the hull of the tanks into two parts. The upper part has a better armour protection and the lower part a weaker armour, as it is in reality.
Example for calculation of armour thickness:
T-72M1 has a frontal hull armour of 3 layers of steel ( 50 mm inner plate, 60 mm outer plate, 30 mm add on plate) and one layer of Textolit (105 mm). Since Textolit has only effect against HEAT i use only the steel value to calculate.
The formula is x= nominal thickness / cos(angle of armour plate)
so we come to x= 140 / cos (68°) ==> x= 373,73 mm ~ 374 mm
-----------------------------------------------------------------------
II.
INSTALLATION:
-Unzip into your SF2 mod folder
----------------------------------------------------------
III.
For remarks, comments, bugs, etc please use the forum or send me a PM.
-------------------------------------------------------------
IV.
All files are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
------------------------------------------------------
------------------------------------------------------------
Hope you enjoy it.
Michael (Gepard)
Made in Germany
February 2023
Submitter Gepard Submitted 02/05/2023 Category Ground Object Mods
-
By Gepard
Panzerpack for Ukraine terrain
*****************************************************
This mod is made for SF2.
----------------------------------------------------------
I.
This package contains some tanks which are, or will be in the next time, in use in Ukraine War.
This are:
For the Ukraine:
Leopard1A4 delivered by Germany
Leopard1A5 delivered by Germany
Leopard2A4 delivered by Canada, Spain and Norway
T-64B original ukrainian tanks, former soviet
T-72M1 delivered by Czech Republik and Poland
For Russia:
T-72B former soviet
T-72BV former soviet
The T-64B, the T-72 and the Leopard1A4 are repaints of the stock files made by TK.
The Leopard1A5 is a repaint of the tank which made Gabilon.
The Leopard2A4 is a repaint of the tank made by Kesselbrut.
Alle LOD files are low poly, which reduce the workload of the computer. With my new made skins the tanks are looking good enough.
The tanks are set for a timeframe from 2022 or 2023 onward. They will not appear earlier in the game.
I have adjusted the values of the armour to make it more real. I also devided the hull of the tanks into two parts. The upper part has a better armour protection and the lower part a weaker armour, as it is in reality.
Example for calculation of armour thickness:
T-72M1 has a frontal hull armour of 3 layers of steel ( 50 mm inner plate, 60 mm outer plate, 30 mm add on plate) and one layer of Textolit (105 mm). Since Textolit has only effect against HEAT i use only the steel value to calculate.
The formula is x= nominal thickness / cos(angle of armour plate)
so we come to x= 140 / cos (68°) ==> x= 373,73 mm ~ 374 mm
-----------------------------------------------------------------------
II.
INSTALLATION:
-Unzip into your SF2 mod folder
----------------------------------------------------------
III.
For remarks, comments, bugs, etc please use the forum or send me a PM.
-------------------------------------------------------------
IV.
All files are FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
------------------------------------------------------
------------------------------------------------------------
Hope you enjoy it.
Michael (Gepard)
Made in Germany
February 2023
-
By GKABS
View File M-84AS / M-84AB1 Yugoslav MBT
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M-84AS / M-84AB1 Yugoslav MBT model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please change the XXX with the correct number from your //Soundlist:
[SoundList]
SoundFileXXX=PKT762
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
SoundFileXXX=grenade
[PKT762]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[grenade]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Nightshade/PR for searching information for the tank blueprint.
AleksejFonGrozni as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/m-84-main-battle-tank-a6839bb9b0d7403aa80951c31d76fe18
3Dimitrije as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/1984-uro-akovic-m-84-141ef5a5934742329b7d618c2e004f92
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Submitter GKABS Submitted 09/28/2021 Category Ground Object Mods
-
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
M-84AS / M-84AB1 Yugoslav MBT model
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please change the XXX with the correct number from your //Soundlist:
[SoundList]
SoundFileXXX=PKT762
SoundFileXXX=TankEngine
SoundFileXXX=TankTrack
SoundFileXXX=grenade
[PKT762]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[TankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[grenade]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Nightshade/PR for searching information for the tank blueprint.
AleksejFonGrozni as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/m-84-main-battle-tank-a6839bb9b0d7403aa80951c31d76fe18
3Dimitrije as I have used his 3d model as a blueprint (I have taken a screenshot to make the model)
https://sketchfab.com/3d-models/1984-uro-akovic-m-84-141ef5a5934742329b7d618c2e004f92
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
-