Jump to content

Open Club  ·  12 members

Sign in to follow this  
VonBeerhofen

Rocks around the clock

Recommended Posts

Here's a quick mock-up of 3 different rock models using the same skin in a desert environment. These models were not additionally resized but instead a sloping hilly terrain was used and the models were grouped so close together so multiples look like a single rock formation, each model isn't larger then a default forrest 3DZ. Ofcourse one could use different drawings on each model too and it could probably mimic the cliffs of Dover with an appropriate drawing and a special coastal tile for it or perhaps reefs or mountain ridges. Plenty of ideas here but a lot of work, smile

Boulderdash3.jpg

Boulderdash1.jpg

Boulderdash2.jpg

An Old Rocker

Edited by VonBeerhofen
more pics

Share this post


Link to post
Share on other sites

Here's the model as it was expanded to it's fullest capability, hence a 100% model, as there's no more room to add any polygons or nodes which will have any use. As the build progressed the model was saved regularly at various stages of the build, all of course with fewer polygons. However I've tried to change each consecutive model significantly so that each one is unique and I have at least 100 of these to play with. SCRN0050.jpgSCRN0051.jpgSCRN0052.jpgSCRN0053.jpgSCRN0054.jpgSCRN0055.jpgSCRN0056.jpg

VonBeerhofen

Edited by VonBeerhofen

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Similar Content

    • By VonBeerhofen


      View File SuspensionBridgeFix
      It fixes the 2 missing cables in the stock EAW model TMOD12_H/TMOD13_H.3DZ. The .ZIP contains ALL files relating to the bridge and in most EAW versions it suffices to extract the ZIP directly into your game folder where EAW.EXE resides. Beware if these TMOD slots contain a different object/model as it will be overwritten when present!
       
      VonBeerhofen
      (EAW Launchpad Janitor)
      Submitter VonBeerhofen Submitted 12/14/2024 Category EAW - European Air War  
    • By VonBeerhofen
      It fixes the 2 missing cables in the stock EAW model TMOD12_H/TMOD13_H.3DZ. The .ZIP contains ALL files relating to the bridge and in most EAW versions it suffices to extract the ZIP directly into your game folder where EAW.EXE resides. Beware if these TMOD slots contain a different object/model as it will be overwritten when present!
       
      VonBeerhofen
      (EAW Launchpad Janitor)
    • By VonBeerhofen
      An error I made working on the city districts drew my attention to the COSTCT tile which only shows a staggering 6 times in the entire EAW world. I'm pretty sure there are hundreds of coastal towns and seaside resorts in Europe, one of which is the one I live in. So I feel I have a choice to make, add more to the EAW coasts or free the tile to be turned into a new city tile to add more diversity to the limited set in use. Personally I think that a village or city tile one coastal tile away from shore will work just as well, after all the entire coast and beach are merely app. 1 or 2 KM deep. The question though is what is a better use in a 64 small tileset?
      Furthermore with a universal tile border there is also a much better use for the river city tiles as they can now also function outside the cities and add more diversity, as was done with other nature's in EAWPRO. Besides that industries predominantly happen on river banks, so it adds to realism too. Vice versa there's also no reason not to use other bridges inside cities like London when borders are uniform, which had 5 at the time of the blitz. EAWPRO already uses dozens of instances of the unused stock rail bridge and a much higher number of any other bridge. They're even used as piers on coastal tiles too, making fun targets to destroy!
      Here's Londen Thames with added bridges, of course the fake crossing can be removed now too.

      VonBeerhofen
    • By VonBeerhofen
      or bringing order to the chaos. I've applied a previously described algorithm of grouping tiles on the Italian cities which forms them more into what one might call 'districts', i.e. more organized then what was shown in the previous thread. The fractal algorithm can create many different layouts using various parameters, one of which is determined by looking at an entire region and the neighboring tiles surrounding a particular tile. It then randomizes smaller groups it creates and adds an occasional seed between them so the group isn't just echoing a certain tile. In the below calculation groups are created from the outside inward, taking the city's shape into account, after all the surrounding tiles influence the outcome of the calculation. As part of the fun 1/2 of the tile map uses an inverted calculation as can be seen in the last 3 pictures which is Munich, hence it's border and center differs from the  other pictures shown. The other 5 are London.









      You heard it first in www.combatace.com
      VonBeerhofen
    • By VonBeerhofen
      No more repetitive borders or center tiles and more different villages. With this randomization all village and city tiles can be used at will where ever in the game  in any possible rotational state, and it's a lot less mapping work. I already showed the idea some time ago but not with the Harvest City Set. There is still some work to be done to narrow some borders and create the right impression I'm after but I think it's slowly getting there.
      Here's a few screen shots, as an experiment a few village tiles were replaced with breaker field tiles and two different city/village layouts were tried, which means that the randomization for each layout is entirely different while the cities and village sizes and positions weren't changed. 





      You heard it first on combatace.com
      VonBeerhofen
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..