Jump to content

Recommended Posts

After having won the competition for a light attack plane, FIAT had encountered problems with the structural integrity of its two-part fuselage system in the G-91. The first model, built the way it was meant to, in the wind-channel showed the possibility of unusual wear in the connection system of the two fuselage parts, which could have lead to the breaking and the loss of the plane in medium to high-g exposures.

The construction team had to overthink a possibility for a workaround without making the airplane much heavier, more expensive and more difficult to maintain.

Italian minister of defense, Paolo Emilio Taviani, not happy about this matter, sought an other way to reinforce the italian air force with a suitable and comparable aircraft until the problems of the G-91 would have been solved.

He was then offered the A-4 Skyhawk, which was also a light and easy to maintain aircraft.

Three italian pilots of the Aeronautica Militare received the possibility to test the aircraft in the US. Their reports included a satisfactory review of this nimble aircraft. It was described as nice to fly and easy to maintain.

The ministry of defense, not willing to upset FIAT but showing impatience, ordered 72 A4D-2N (renamed A-4C; with an option for eventually more), which got allocated to squadrons of the 6th, 32nd and 51st Stormo in 1962.

An A-4C of the 32nd Stormo, 1962

large.img00001.PNG.757c104ab83d037cabb60338efb666a6.PNGlarge.img00003.PNG.cdfd88e5d66ea4566433ae87f9613d75.PNG

 

At the end of the 1960s, the A-4Cs got replaced by the more modern A-4Es, with better engine and radar and also the possibility to take more payload on board. Some of the A-4C, which some of the italian pilots called "topolino" (little mouse), got retained for training purposes while most of the fleet got back to the US or sold to other countries.

A-4Es from the 51st Stormo, 1970

large.img00004.PNG.b43ad2c206096636905026c6a81ad5f8.PNG

 

At the end of the 1960s, FIAT finally was able to start delivering G-91 to the air forces. Italy, though being local customer, was doubtful about replacing the Skyhawks with the Ginas, since all pilots were satisfied with the capabilities and the flight characteristics of the aircraft.

Mario Tanassi, then minister of defense, declared, after having discussed this matter with the Adreotti administration, that the Skyhawks would be replaced by G-91 in a matter of two years with the exception of the 6th Stormo. The replaced Skyhawks got then sold to other countries or scrapped for spare parts. The 6th Stormo was the last wing having the Skyhawk, receiving in 1973 the last upgrade with the A-4F.

A-4Fs of the 6th Stormo

large.img00005.PNG.e94fffe0cb1c4496e39566869ceaf10b.PNGlarge.img00006.PNG.8fa767c2b6f5632360b4282b45d93a7e.PNGlarge.img00007.PNG.65ea47bafd20e8bafcb01899c7b1a016.PNG

 

The wing did not have the Skyhawk for a long time. In 1978, MoD Attilio Ruffini on behalf of the italian government, got into negotiations with SecDef Harold Brown of the Carter Administration about the purchase of 24 A-6 and 4 EA-6 aircraft of Grumman for replacing the Skyhawks. In Spring 1979, the negotiations were successful and Italy was to receive the new aircraft in early 1980. The days of the Skyhawk in italian service got fewer and fewer. The last Skyhawk was taken out of commission and sold to Brazil in April 1980.

A-6S' of the 6th Stormo, around Summer 1980

large.img00010.PNG.71f60f68a26dbed11e404ac607875efa.PNGlarge.img00012.PNG.a84c2b0268d8df31f95218bcd810c421.PNGlarge.img00013.PNG.09be4892aea68f9473c46f5217dd058a.PNG

EA-6S', Summer 1980

large.img00016.PNG.5813a01d32ea1404be82810168310c98.PNGlarge.img00017.PNG.058623e6b3956319585fc58e039ab3b6.PNG

  • Like 10

Share this post


Link to post
Share on other sites

those Italian Scooter skins are awesome!

mildly suprised that at least later in its fictional life the folks in the Aeronautica Militare  didnt do any play on the American nickname. Little mouse is nice, but i was rather expecting Vespa :biggrin:

  • Like 1
  • Haha 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By GKABS


      View File A-6C Intruder 
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6C Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - TRIMM_pod
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, making new texture sets, fixed collision points, and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general. and finally reworked my TRIMM_pod and made it a totally new one.
      I thank you for everything. 
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 10/16/2024 Category A-6  
    • By GKABS


      View File A-6B mod0 & mod1 Intruder 
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6B mod0 and mod1 Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, I thank you for everything. 
      yakarov79: for making new texture sets.
      By yakarov79
      fixed collision points and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general.
      new skins with new bump maps and specular maps,  so nothing old will work now.
      I used my LAU-7 instead of that old one. now it has the correct proportions to AIM-9,
      I made a new launcher for AGM-12 and AGM-45 - Aero5A now weapons are properly attached to the launcher...
      added some small bits in the model and fixed some mapping issues,
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 07/20/2024 Category A-6  
    • By GKABS


      View File A-6A Late Intruder 
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6A late Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, I thank you for everything. 
      yakarov79: for making new texture sets.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      1.0.1
      By yakarov79
      fixed collision points and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general.
      new skins with new bump maps and specular maps,  so nothing old will work now.
      I used my LAU-7 instead of that old one. now it has the correct proportions to AIM-9,
      I made a new launcher for AGM-12 and AGM-45 - Aero5A now weapons are properly attached to the launcher...
      added some small bits in the model and fixed some mapping issues,
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      SKins represent pre-Vietnam War squadrons. First user VA-42 they were first in Intruder and was taking care of conversion and training for the US Navy. The second skin is for VA-75 short deployment, first for USS Independence and first for VA-75 on Intruder. Later in 1965, they deployed to Vietnam.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 04/16/2024 Category A-6  
    • By GKABS


      View File A-6A Early Intruder
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6A Early Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD

      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.4

      -Two new skins
      -3d max model fix
      -Resized the pilot
      -Other fixes (too many to list
      -Data fix
      1.0.3
      - Fixed some issues with the model
      - Resized the engine intake
      - Fixed the size of the DRAFairing_AA
      - Added right-side exhaust pipe
      - Added cockpit top lights and misc.
      - Fixed some data file issues.
      1.0.2
      - Fixed GroupLimit=" entry thanks to Svetlin
      - Added MER entries under weapons thanks to Svetlin
      - Fixed some entries in the data file thanks to Cliff7600
      - Fixed the AOA so they don't show in flight.
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      Coupi: for making the data files and FM and the skin.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, I thank you for everything. 
      yakarov79: for making two new texture sets.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
      Submitter GKABS Submitted 03/22/2024 Category A-6  
    • By GKABS
      Hello and thank you for downloading my work.
      https://gkabs.net
      https://gulfknights.net
      What's included:
      A-6C Intruder 
      (Please delete the old files before installing the new one)
      This is a new model with many new features.
      - AOA in the front landing gear that functions like the one in the cockpit.
      - Cockpit versions, ALR-15 and audio RWR
      - Added bombing system.
      - New pilot.
      - New pilot seats.
      - added LAU-34 and LAU-7 Rails
      - bonus- A-6A with fuselage air brake LOD
      - added LAU-34 and LAU-7 Rails
      - added LAPR-25
      - TRIMM_pod
      - Other addon
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      If you need any further help, please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You can use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
      gkabs@gkabs.net
      Credit goes to the following:
      Coupi: for making the data files and FM and the skin.
      Snapper21: for the donation of the model to the community
      Nyghtfall: 300 gal drop tank model and texture
      Nyghtfall: for LAU-34 and LAU-7 Rails
      Ravenclaw: for the AGM-12B, AGM-12C_A, and AGM-12E missiles and all the other ones linked in the loadout.ini file.
      Cliff7600: for AOA light data for the front landing gear.
      yakarov79: for helping with the 3ds model and fixing so many bugs (one is the moved APR-25) with it, also for his feedback and information, making new texture sets, fixed collision points, and hitboxes, fixed lights, and some small data issues
      reworked weapon stations, now it uses a common US 300gal tank, corrected attachment points for big and small bullpups, shrikes, and all weapons in general. and finally reworked my TRIMM_pod and made it a totally new one.
      I thank you for everything. 
      Additional credits:
      I have added all weapons that are stated in loadout.ini.
      all weapons are made by Ravenclaw
      Zuni rockets for launchers
      except two refueling pods made by nyghtfall from his A-4 pack.
      For the community for sending all the information and PDF files.
      Third Wire for making this outstanding game.
      Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Mixamo

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      gulfknights.net
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..