F4U-1 "Corsair" Birdcage mod for SF/WoV/WoE WW2 PTO installs
 
This package is a simple mod to the existing F4U-1 created by Wolf257. It will create a NEW aircraft, a 'stand in' F4U-1 'Birdcage' Corsair. You will also be making changes to your EXISTING F4U-1, with some simple file renaming to create the F4U-1A, which the aircraft really is. This will differentiate them from each other.
 
The package contains ONLY the necessary files to create the aircraft; various inis, etc, and a NEW skin from my enhanced template, representing VMF-124, the first American unit to take the Corsair into action in Feburary, 1943.
 
You MUST have Wolf's original F4U-1 to create the full aircraft from. The aircraft LOD (physical model) is NOT included!!! The cockpit folder IS included, as I made some changes in the 'viewed' wing, so rather than have the end users make a mistake with the 'wing.bmp', I choose to include the full folder. A "slightly" enhanced dash bmp is included, just for fun.
The damage tga and a NEW -only available in this mod- Birdcage Corsair Hangar screen are also included!
 
Full, detailed instructions are below in the "To Installate" section.
 
--YOU MUST HAVE THE BUNYAP WEAPONS PACK TO GET THE WW2 WEAPONS!! --
--- YOU MUST HAVE WOLF'S ORIGINAL F4U-1 INSTALLED FOR THE AIRCRAFT LOD!!! ---
 
This aircraft has been tested in SF/WoV/WoE and post-patch WoI (8/29/08). There still are some 'issues' with prop-plane flight models, but there has been a MARKED improvement!! You use it in WoI at YOUR own risk.
 
As mentioned above, there's (yet another!) detailed readme enclosed -- so I require you to read the thing!! Notes, explinations, blah, blah, etc, and so forth.
 
Good Luck, Good Hunting! and Happy Landings and all that sort of stuff..
Wrench
Kevin Stein

Grumman TBF-1 Avenger -- A Mod of the Dev A-Team's TBF-1C
 
This is a mod of the DAT's TBM-1C Avenger of WW2 fame, into an early war version, circa 1942
 
This is to be considered as an "incomplete" aircraft mod, due to the non-inclusion of certain files. I've NOT included the aircraft LOD file nor the cockpit folder. See below "To Install" for a complete list of the necessary parts.
You -MUST- have the DAT's TBF-1C to make use of this aircraft, as you'll be coping files over from it.
 
The new skin, from a completly redrawn template based on Gramps' original skins, represents VT-3 based aboard USS Saratoga (CV-3) circa August/September 1942, approximately the time of the Battle of Santa Cruz and the fight for Guadalcanal. All the panel and rivet lines have been redone, new decals created for 'plane in group numbers', aircraft designation, and BuNums for 24 aircraft. It can also be considered a rather 'generic' USN/USMC version, as most units carried no markings. Some USMC VMSB units DID use a 3-digit ID number, based upon the aircrafted BuNum, but that's a story for another day...
 
I've included all the inis I've modified, so you'll be copying the minimum number of bits. The data ini includes mods that remove the wing guns, and adds the single 30 caliber MG on the nose. Unfortunatley, the LOD still contains the postions of the 2 wing mounted 50 cals, so you'll have to suspend disbelief (or pretend they're broom handles stuck there to fool enemy fighters that they're real guns)
Surface search radar has also been activated. NEW damage tgs's have also been created (they can be used on any of the TBF/TBMs).
 
= IMPORTANT: This aircraft is designed for use in SF/WoV/WoE -ONLY-, I have NOT tested it in post -8/28/08- patch WoI =
 
=This mod is designed for use with the Bunyap Weapons Pak of 6/06, as it contains all the needed weapons . If attempting to use this aircraft with any other weapons pak, you'll need to add ALL the WW2 era bombs, torpedoes, etc. They are NOT included in this package.=
 
As you probably suspect, there's a highly detailed, step-by-step readme included, so you'd be wise to read it!!! And as always, the usual notes and comments and general nonsense....
 
Happy Hunting!
Wrench
Kevin Stein

NAA P-51A Mustang, 530FS, 311 FG, Skin and Ini Pak, For SF/WoV/WoE CBI installs
 
This package contains modifications and a reskin of Wolf's P-51A as used in the CBI Theatre. These are the early Allison-engined versions. This is a semi-complete aircraft mod, -specifically- designed for use in the CBI style install of the games, if you've created CBI only WW2 install that is . I've seen no other references to "A" model Mustangs being used anywhere else in the Pacific Theatre.
 
The skin represents aircraft from the 530th FS, 311 FG located in Burma, circa 1943.
I say 'semi-complete', as only the skin and decals, plus various inis are included in this mod. You =WILL= be transfering several critical files from your original P-51A to get this mod to work. (see "To Install" below) Consider this a "Theatre Specific" type of aircraft mod.
 
The various inis supplied in this kit, will give you the loadouts and other tweeks I've made that fit the time frame, and more importantly, the Theatre of Operations. "A" model Mustangs were slightly different in their usage and loads, then AAF ones used in the ETO/MTO - and different again from RAF ones. The P-51As as used in Burma at this time carried the 3-tube M-10 "Triple Bazooka" launcher, plus their usual compliment of bombs and machine guns. Nose guns are NOT used on this model.
 
I have included a bunch of small files, NEW Loading and Hangar screens, SHD (shadow), and other bits. But remember -- the main aircraft LOD file is NOT included, as per Wolf's wishes, nor is the cockpit folder. His original "P-51A_readme.txt" is included as well.
 
-= NOTE: you must have the Bunyap Weapons Pak of 6/06 to get the WW2 weapons and guns and such =-
=NOTE: you MUST have Wolf257s WW2 Planes Pak for the Original P-51A Lod and Cockpit folder (DUH!)=
- This mod has been tested in SF, WoV and WoE. This mod is NOT reccomended for use in a WW2 PTO style install of WoI, as it handles prop flight models in "a most unusual, and odd way"-
 
PLEASE read the enclosed readme for detailed, easy to follow install instructions.
 
Good Hunting!
Wrench
kevin stein
 
(yes, I know it's the same screenie I used before...but I was too lazy to take another!)

Bell P-400 "Airacobra", 39th FS Skin and Ini Pak, For SF/WoV/WoE PTO installs
 
This is a semi-complete mod, re-creating the P-400, export version of the Bell P-39 "Airacobra". The skin represents aircraft from the 39th FS, 35th FG as seen around Port Morseby, PNG during mid-1942
 
It is also to be considered a FULL replacement, minus certain files, for the P-400 mod that's been on my site for several years. This version gets a fully upgraded skin, with newly redrawn panel and rivet lines, and a replacement cockpit, based on the Dev A-Team's Hurricane.
 
When I say "semi-complete", this means the aircraft LOD file is NOT included, NOR are the cockpit files from the Hurricane 1. You WILL be transfering these from their respective aircraft. Needless to say, you MUST have Wolf's WW2 Planes Pak for the LOD, and the DATs Hurri. Full instructions, and a parts list, are below in the "Install Instructions".
 
I've supplied all the inis, misc bmps and tgas and various and sundry bits to make the process as easy as possible.
 
The skin, as said above, is for the 39th FS, and has completely new redrawn panel and rivet lines. Aircraft ID numbers are as accurate as possible, based on research. Serial numbers are NOT used, as these were painted out in-theatre. In reality, although not painted on the aircraft, these birds were assigned RAF serials, as they were originally intented for the UK.
 
A revamped, cleaned up version of my original P-39 Hangar Screen is included, as is the damage tga.
 
-= NOTE: you must have the Bunyap Weapons Pak of 6/06 to get the WW2 weapons and guns and such =-
- This mod has been tested in SF, WoV and WoE. This mod is NOT reccomended for use in a WW2 PTO style install of WoI, as it handles prop flight models in "a most unusual, and odd way"
 
As usual, you are REQUIRED to read the enclosed readme for full, detailed install instructions.
 
Good Luck, and Good Hunting!
 
Wrench
Kevin Stein

Republic P-84 Thunderjet "What If..." WW2 version -For SF/WoV/WoE and probably WoI (maybe?)
 
This little mod is a tweek to RussoUK's F-84E, with a new lod with the bubble-top non-reinforced canopy. It "represents" P-84 Thunderjet aircraft from the 61st FS of the 56th FG in the "What If..." world of WW2: 1946 aka SWOTL2.
 
Russo made the new lod for me several years ago, and this has been languishing on my HD for some time; I figured NOW would be a good time to finish it off and release to all you good folks!
 
The new skin, with redrawn panel lines (but no rivets - this was done before I learned how, and wasn't going back to add them!), has the marking of the 61st FS, still carrying their standard WW2 ETO markings as of 1947. Included are several historic nose arts as seen on their Thunderbolts. I've tried to match aircraft call letter with the approiate art work. Serial numbers are accurate, had the A model gone into full production.
 
A new WoE-style Hangar screen is also included.
 
The auto-speed canopy has been disabled, as this no longer works in WoI (and by inference, when the SF/WoV/WoE patch arrives), but I somehow managed to fool the game engine by assigning to the arrestor hook; so, the canopy will open when you hit the "H" key.
 
It should be noted this is 1of 2 Thunderjet mods I'm releasing; this one, a "What If..." for WW2: 1946, and a Real Life ™, Historic version, which is simply called "F-84". It represents the B/C model, and is available seperatly, as they are designed to be exclusive to their eras.
 
== YOU MUST HAVE THE BUNYAP WEAPONS PAK TO HAVE THE WW2 STYLE WEAPONS!!!! ==
 
PLEASE read the enclosed readme for full, detailed instructions, and more of the usual nonsense in the Notes section
 
Happy Landings!
Wrench
Kevin Stein
 
(yeah, I know I resued the same screenie from before...I'm lazy! Get over it!!! )

F6F-5 Hellcat mod for SF/WoV/WoE - WW2 PTO Installs
 
This is a modifcation of Razor/Geo's F6F-3 'Hellcat' into the -5 used by the US Navy and Marine Corps in the Pacific during 1943-45. I call this a 'representative' -5, as it is based on the -3, and still has the rear cockpit windows, which would not be present on the later -5 'represented' here.
 
This is a semi-complete aircraft mod, including all the necessary parts, =excepting= the aircraft LOD, to recreate the standard -5 day fighter-bomber . You =WILL= have to copy the "F6F.LOD" from your original Hellcat's folder to this one. It's highly reccomened you have the original, plus any weapons it adds, in you PTO install.
 
The cockpit is also NOT included, but a new gunsight and cockpit ini is, so you'll need to copy over the -3's cockpit as well. See 'Installation" below...
 
The skin is brand new, from a template created by me, based off the original tri-color that came with the -3 Hellcat. It represents's Hellcats from VF-3 aboard USS YORKTOWN circa early 1945. Weapons stations have been added for the wing-mounted HVARs, as well as the usual bombs and drop tank original built into the -3. My Hellcat Hangar and Loading screens have been included.
 
It is also NOT designed to be used in a WW2 style install of WoI, as WoI handles propeller aircraft -completely- differently, and they do NOT fly properly. You've been warned....
 
I've included Geo' original readme, please give it a look over. Remember: you MUST have the original F6F-3 Hellcat available at his site:
 
Geo's Aircraft:
http://www.geos-aircraft.com/SFAircraft.htm
 
== YOU MUST HAVE THE LATEST WEAPONS PAK INSTALLED TO GET THE WW2 WEAPONS!! ==
 
You know what ya gotta do...read the enclosed readme for all kinds of informative goodnes! The best part, is it's non-fattening, non-alcholic, lowers cholesteral, is high in fiber and generally fun!!
 
Enjoy!
Wrench, The
kevin stien

F6F-5N Hellcat Nightfighter mod for SF/WoV/WoE - WW2 PTO Installs
 
This is a modifcation of Razor/Geo's F6F-3 'Hellcat' into the -5N nighter version used by the US Navy and Marine Corps in the Pacific during 1943-45. I call this a 'representative' -5N, as it is based on the -3, and still has the rear cockpit windows, which would not be present on the later -5N 'represented' here.
 
This is a semi-complete aircraft mod, including all the necessary parts, =excepting= the aircraft LOD, to recreate the -5N Nightfighters. You =WILL= have to copy the "F6F.LOD" from your original Hellcat's folder to this one. It's highly reccomened you have the original, plus any weapons it adds, in you PTO install.
 
Included is the full cockpit, modified by Lexx_Luthor, from the F-86D for use in this aircraft, a skin representing VMFN-542 - complete with accurate Modex numbers and nose art (BuNums not included), all inis, damage tgas, and a NEW -only available in this mod- Hellcat Nightfighter Hangar & Loading Screens. The skin is brand new, from a template created by me, based off the original tri-color that came with the -3 Hellcat. Weapons stations have been added for the wing-mounted HVARs, as well as the usual bombs and drop tank.
 
You're also be using the weapons editor to add the new wing-mounted radar pod, modified from something I don't remember at this point in time. This is designed ONLY for use with the Bunyap Weapons Pak, and NOT the TMF pak, as their's does not contain the WW2 weapons. It is also NOT designed to be used in a WW2 style install of WoI, as WoI handles propeller aircraft -completly- differently, and they don't fly properly. You've been warned....
 
I've included Geo' original readme, please give it a look over.
 
== YOU MUST HAVE THE LATEST WEAPONS PAK INSTALLED TO GET THE WW2 WEAPONS!! ==
 
Please read the enclosed readme for more, detailed install instructions. Etc and so forth... you know the drill!!
 
Wrench
kevin stein

Plane has no readme so I want to add credits for first Mustang TEAM (Crisis & Wolf-257) who made cockpit - originaly it is cockpit for Mustang but I thing it can be used (I cant contact Crisis so if there is a problem let me know).
This plane was build for fun and I think there wont be any further development.
 
Monty CZ