47 files
-
A-10C DCS Michigan ANG Skin
By Dave
A-10C DCS Skin by Dave USAFMTL Slavens
This skin packs contains 1 A-10C skin from the 107th FS Selfridge ANGB, Michigan (MI)
I used the ED templates.
To install:
Just install to your DCS World directory and let it overwrite the folder names. It will not replace anything, just add.
Example:
X:\xxxxxxx\Eagle Dynamics\DCS World\Bazar
61 downloads
(1 review)0 comments
Updated
-
A-10 Ferris Splinter [Fictional]
By EricJ
A-10 Ferris Splinter [Fictional]
This is a basic Splinter scheme based on an F-15C design modified for the A-10 airframe, and also some artistic liberties as well. While the A-10C is shown, this can also be used on the A-10A, simply copy and paste the folder into the Bazar\Liveries\A-10A or A-10C and select “Ferris Splinter No.1” in the Payload Menu and go fly.
23 downloads
(2 reviews)0 comments
Updated
-
European 1 Blank Skin v2.0
By EricJ
As it says it's nothing specific to any unit, just like the "A-10 Grey" skin, a simple blank skin if like me, who loves the European 1 scheme more than the Grey one, then this is for you. I don't mind retextures if you want but please credit me at the minimum, as I don't mind you adding stuff to it. Of if you have a request you know where to find me... Needless to say this works on both the A (preferably due to the lack of the wedge antenna) but of course can work on the C version as well if so desired, as you simply extract the file and select "European 1" in the Paint Schemes menu for the aircraft and go fly.
29 downloads
(0 reviews)0 comments
Updated
-
A-10A FT 75-308
By EricJ
FT 75-308
This skin represents an A-10A from the 75th Fighter Squadron, 23rd Fighter Group (“Flying Tigers”) in an European 1 scheme.
To install this skin simply cut and paste the “FT 75-308” folder in your DCSWorld\Bazar\Liveries\A-10A or if preferred, A-10C folder. In the Payload Editor select “23rd FG, 75th FS, Pope AFB” and go fly.
Disclaimer: The original supplied artwork was used to trace the outline of the Shark Mouth.
26 downloads
(1 review)0 comments
Submitted
-
A-10A JAWS No.2 Skin
By EricJ
JAWS 75-260
This is one of the other schemes of the JAWS (Joint Attack Weapons System) program.
For installation simply drop this in your DCSWorld\Bazar\Liveries\A-10A or A-10C folders, open the simulation and in the Payload Window, select “JAWS Skin No.2” and go fly.
EricJ on the SimHQ Forums
EricJ562 (Steam ID)
http://www.facebook.com/EricJ56
flanker56@hotmail.com
I also write Military Science Fiction books, if interested you can check them out here:
http://www.amazon.com/Eric-Johnson/e/B003NQA7QK/?_encoding=UTF8&camp=213733&creative=393193&linkCode=shr&tag=hupa08e-20&linkId=KLGFFABHB5ZLOXPS
Eric Johnson, 2014
35 downloads
(2 reviews)0 comments
Submitted
-
A-10A JAWS No.1 Skin
By EricJ
A-10A JAWS 75-262
This represents (as close as possible given various sources) the JAWS (Joint Attack Weapons System) A-10A Warthog from the 57th Wing, Nellis Air Force Base, Nevada.
Installation: Simply unzip the folder and extract the file into your Bazar\Liveries\A-10A (or optionally the C, though the only oddity noticed is the antenna behind the cockpit, otherwise it’s identical mapping) directory and go into the simulation go to the Payload section and for the Liveries drop down menu select “JAWS Skin No.1” and go fly.
31 downloads
(3 reviews)0 comments
Updated
-
A-10A Peanut Scheme, 47th TFS, 91 TFG
By EricJ
A-10A Peanut Scheme Barksdale, CA (Aircraft 78-552)
This aircraft was painted in the “Peanut” scheme, a test pattern prior to deployment to the Persian Gulf for Desert Shield/Storm. However, the USAF decided against the scheme and left the European 1 scheme as standard. Given the various references I have I chose to depict the aircraft as such, as the serial number and pattern was more accurate rather than unit markings. Some did not have the green tips while one did, so I chose to make it more “assigned” to the 47th TFS, 917th TFG, Barksdale AFB, LA. Despite this I gave it a “used” look anyway as it added a lot of atmosphere to the aircraft.
Installation: Simply unzip the folder and extract the file into your Bazar\Liveries\A-10A (or optionally the C, though the only oddity noticed is the antenna behind the cockpit, otherwise it’s identical mapping) directory and go into the simulation go to the Payload section and for the Liveries drop down menu select “47th TFS, 917th TFG” and go fly.
44 downloads
(1 review)0 comments
Updated
-
A-10A Pre-Production Scheme No. 1
By EricJ
Pre-Production No. 1
Before the Camouflage legacy of the A-10, this was one of the proposed schemes.
Installation: Simply unzip the folder and extract the file into your Bazar\Liveries\A-10A (or optionally the C, though the only oddity noticed is the antenna behind the cockpit, otherwise it’s identical mapping) directory and go into the simulation go to the Payload section and for the Liveries drop down menu select “Pre-Production No. 1” and go fly.
20 downloads
(1 review)0 comments
Submitted
-
77-234 A-10A 81st TFW
By EricJ
A-10A Warthog 77-234
This aircraft (given model configuration) represents an aircraft assigned to the 81st TFW (no particular squadron mentioned as the reference was from Airliners.net), tailcode “WR” from 1990.
Installation: Simply unzip the folder and extract the file into your Bazar\Liveries\A-10A (or optionally the C, though the only oddity noticed is the antenna behind the cockpit, otherwise it’s identical mapping) directory and go into the simulation go to the Payload section and for the Liveries drop down menu select “77-234 81st TFW” and go fly.
EricJ on the ED Forums
EricJ562 (Steam ID)
http://www.facebook.com/EricJ56
flanker56@hotmail.com
I also write Military Science Fiction books, if interested you can check them out here:
http://www.amazon.com/Eric-Johnson/e/B003NQA7QK/?_encoding=UTF8&camp=213733&creative=393193&linkCode=shr&tag=hupa08e-20&linkId=KLGFFABHB5ZLOXPS
Eric Johnson, 2014
22 downloads
(1 review)0 comments
Submitted
-
A-10A Pre-Production Scheme No. 4
By EricJ
A-10A Pre-Production No. 4
73-1667
This scheme is a proposed coloration (which obviously was not used, instead the “European 1” and “Ghost Grey” schemes became the standard scheme for the aircraft).
Installation: Simply extract the folder and place it in the Bazar/Liveries/A-10A or C folder, go into the mission folder and in the Payload section and for Liveries select Pre-Production No. 4 and go fly.
21 downloads
(2 reviews)0 comments
Submitted
-
A-10A/C High Resolution Pilot Skins for Default Aircraft
By HomeFries
ModMan 7.3 with the November 2012 update is required to use this mod. If you arent using ModMan 7.3 (Nov 2012), then see the bottom of this file for manual installation instructions.
This mod replaces the default 1024x1024 pilot texture with 2048x2048 pilot textures based on the pilot texture for the F-15C. The high resolution textures were ported over and adjusted where required to maintain compatibility with the slight differences in the A-10 pilot texture.
On top of this, I have added unit patches to each of the default USAF squadrons included with DCS World. This also includes unit morale patches on the right shoulder where applicable and the proper Major Command (MAJCOM) on the chest.
I have also tweaked the description.lua files to apply the F-15 helmet (the Kevlar grey helmet), replacing the default white helmet that is better served for USN aircraft. I did not replace the helmet texture to ensure compatibility with other aircraft; should you wish to apply the kevlar helmet to other 3rd party A-10 skins you can analyze the description.lua files for the proper lines to add to your other files.
Finally, I added a default pilot_a10.dds file to TempTextures, which ensures that the high resolution skin is available for 3rd party A-10 skins. Since there is no designated squadron for a generic skin, I used a "Hawgsmoke 2012" patch on the right shoulder to add color. If you do not wish to use this for the default A-10 pilot skin, just remove pilot_a10.dds from the Bazar\TempTextures folder, and the original A-10 pilot will be restored for all other skins.
Manual Installation:
If you wish to manually install this mod, then back up your Bazar\Liveries\A-10A and Bazar\Liveries\A-10C folders. Once you have done this, then just unzip the files to your DCS World folder, ensuring that the recursive folder structure is intact.
Manual Removal:
1. Restore your original Liveries folders (you did back them up, right?)
2. Delete "pilot_a10.dds" from the Bazar\TempTextures folder
3. Delete the folder Bazar\World\Textures\A-10 (don't worry; the original files are in the A-10.zip file in the Textures folder)
Enjoy!
-Home Fries
114 downloads
(0 reviews)0 comments
Updated
-
A-10 & F/A-18C Pilot Photoshop Template (2048x2048)
By HomeFries
This is the template I used to create the pilot skins for default A-10 aircraft. The template is 2048x2048 to accommodate the higher resolution F-15C pilot skin, though the original A-10 skin is available as background. Since the F/A-18C pilot skins use the same texture (albeit shaded), I have added USN/USMC units as well.
The template includes green, desert, and black flightsuits, the SRU-21P survival vest, different unit patches, morale patches, A-10 type patches, and pencil patches. In addition, there is a modular nametag set that allows different colored nametags, different types of warfare badges (e.g. USN Pilot & NFO wings, Jump wings, etc.), and a place to add your name.
92 downloads
(1 review)0 comments
Updated
-
A-10C Experimental Camos
By Jack
copy this folder to
Bazar\Liveries\A-10C
that is all
The pack contains that color schemes:
-S/N 76-530 "Flipper"
-S/N 76-552 "Peaunt"
If you like my job, please donate me here
31 downloads
(0 reviews)0 comments
Submitted
-
Weathered A-10 Skins for SIMMOD's A10
By Ruggbutt
With the exception of the gray skin (by Rocky) these are my original skins that were released with the SIMMOD A-10. They've been re-done using Deadman's template and updated for FC 2.0. Install with Modman 7.3 or better. Installs in original CDDS files so you have no framerate hit.
142 downloads
(2 reviews)0 comments
Submitted
-
Weathered A10 Skins (Original Files)
By Ruggbutt
Flaming Cliffs 2.0 Compatible. Install with Modman 7.3 or better. Installs into original CDDS files. These are the original files that I've heavily modified and weathered. You'll see no framerate hit with this mod.
52 downloads
(1 review)0 comments
Updated
-
A-10 Weathered Skin Pack
By Ruggbutt
These are stock Flaming Cliffs skins that I've heavily weathered. Installs into CDDS files using ModMan 6.
549 downloads
(1 review)0 comments
Updated
-
Mitch Janssen - HR A10
By Guest
Another good Mitch Jannsen skin A A-10 HighRes Skin 1024x1024. 'Europe' This pack includes "THE LOBSTER" ! Loman compatible Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
937 downloads
(0 reviews)0 comments
Updated
-
Mitch Janssen - HR A10
By Guest
Another good Mitch Jannsen skin Based on the 74th Loman compatible Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
496 downloads
(0 reviews)0 comments
Updated
-
Mr Wolf - HR A10 WR 655 Euro 1.2 skin
By Guest
a very nice high-res: 2048x2048 pixels skin Based on the USAFE A10's based at RAF Bentwaters UK Loman compatible Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
421 downloads
(0 reviews)0 comments
Updated
-
Mitch Janssen - HR A10 JAWS skin
By Guest
Another good Mitch Jannsen skin High resolution skin for the A10 'polka dot' JAWS paintscheme Loman compatible.
373 downloads
(0 reviews)0 comments
Updated
-
(1 review)0 comments
Updated
-
Mitch Jannsen HR - A10 Jaw II
By Guest
A-10 HighRes JAW II 1024x1024 by Mitch Jannsen. Loman compatible. Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
278 downloads
(0 reviews)0 comments
Updated
-
Mitch Jannsen - HR A10 Chopper Popper
By Guest
This includes 2 HighRes Skins 1024x1024. A-10 Chopper Popper is an original Plane. 6/2/91, Kpt. R. R. Swain, Jr Serial: 77-0205 Loman compatible Biohaz will not be held responsible for any harm done due to use of these files
326 downloads
(0 reviews)0 comments
Updated
-
A10 - PinUp 2
By Guest
A fictional skin for the hog. Flashy designer-style skin complete with pin-up girl Includes PDF file for editing the pilotname etc Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
293 downloads
(1 review)0 comments
Updated
-
(1 review)0 comments
Updated
-
Download Statistics
14,331
Files12,608
Comments26,977
Reviews