About This File
Exhaust smoke for the General Electric J47 or J35 equipped aircrafts.
Suitable for the F-86, F-84 from A to G version, B-45, B-47.
There are 2 exhausts variants.
The "J47ExhaustEmitter" is the normal exhaust from this engine.
The "J47WaterExhaustEmitter" is the extremely dirty exhaust obtained from the water/methanol injection.
BE CAREFULL THIS EMITTER IS A FRAME-RATE KILLER IN LARGE NUMBERS!
---------------------------------------------------------------------------------
Instructions:
1) Put the J47ExhaustEmitter.ini and SMOKE3.tga in the Effects folder.
2) Open the "aircraft"_DATA.INI and go down to the engine/s section.
(Example from the F-86F)
[Engine]
SystemType=JET_ENGINE
InputName=THROTTLE_CONTROL
EngineID=1
HasAfterburner=FALSE
SLThrustDry=26288.862
ThrustAngles=0.0,0.0,0.0
ThrustPosition=0.0,0.0,0.0
ThrottleRate=0.4
IdleThrottle=0.10
IdleRPM=0.68
IdleNozzle=0.90
CruiseThrottle=0.37
CruiseRPM=0.82
CruiseNozzle=0.25
MilThrottle=0.65
MilRPM=1.00
MilNozzle=0.01
MaxThrottle=0.99
MaxRPM=1.00
MaxNozzle=0.25
AltitudeTableNumData=10
AltitudeTableDeltaX=3048.0
AltitudeTableStartX=0.0
AltitudeTableData=1.000,0.721,0.517,0.371,0.265,0.212,0.054,0.025,0.000,0.000
DryMachTableNumData=4
DryMachTableDeltaX=0.4
DryMachTableStartX=0.0
DryMachTableData=1.000,0.980,1.000,0.000
TSFCM0=0.820
TSFCM1=1.220
MinFuelFlow=0.03
ExhaustEmitterName=CleanExhaustEmitter ---------------- <<<<Change this emitter>>>>
ExhaustPosition=0.0,-4.76,0.00
FireSuppression=FALSE
MinExtentPosition=-0.31,-4.76,-0.40
MaxExtentPosition= 0.31,-1.45, 0.29
And change the emitter name into
ExhaustEmitterName=J47ExhaustEmitter
or
ExhaustEmitterName=J47WaterExhaustEmitter
(better if used like an afterburner effect to simulate the additional thrust)
----------------------------------------------------------------------------------------------
That's it.
Have a good flight and if it smoke is friendly. :D
Alex (Spillone104)
This File is Freeware and can not be sold or included in any Payware software.