ESPARZA Posted September 8, 2008 Posted September 8, 2008 HI Moorekey ,I've been watching your progress on the E.D.I ,iI havent seen you write anything new on it .... I hope all is well with you and you STEALTHY project ..so how goes it ?are you making progress with eddie I wish the best to you and your E.D.I. project someday it will fly from ther finish line to the winners circle ..so till then i'll keep wacthing to see it fly from this thread to my pc,take care Moorkey!! Quote
Moorkey Posted September 8, 2008 Posted September 8, 2008 Hi all. Sorry for the delay. Have been bogged down with work. Progress is slow, but steady. Currently working on sound effects, and panel in MSFS, and concurrently the SF:G project is progressing. Will try to keep you all better updated. Quote
_black_cell_ Posted September 15, 2008 Posted September 15, 2008 I just wanna ask if this project for the UCAV EDI is history? I want to play this aircraft in woe and i cant find it any where. Are you gonna finish it? Quote
serverandenforcer Posted September 15, 2008 Posted September 15, 2008 I just wanna ask if this project for the UCAV EDI is history? I want to play this aircraft in woe and i cant find it any where. Are you gonna finish it? Read the post right before yours Quote
_black_cell_ Posted September 15, 2008 Posted September 15, 2008 OK, that dose and dosent answer my question. LOL Is the UCAV EDI gonna be compatible with Wings Over Europe? Quote
Moorkey Posted September 15, 2008 Posted September 15, 2008 Eventually. I am being bogged down at work at the moment, so all projects are kind of going slowly. I am modelling in such a way that I am testing the model in MSFS / FSDS so it comes out ok for SFx/WOx. I would ask for donors if I was unable to finish the project. Quote
_black_cell_ Posted September 16, 2008 Posted September 16, 2008 I would gladly finish the project for you. but the problem is i dont know squat about 3D modeling. Quote
_black_cell_ Posted September 17, 2008 Posted September 17, 2008 I have one more question. I was watching the movie and i saw the UCAV EDI had 2 weapon bays (when he destroyed the SCUD, launcher - a little earlier) Does your moddel have 2 weapon bays? Quote
Moorkey Posted October 7, 2008 Posted October 7, 2008 (edited) I have one more question. I was watching the movie and i saw the UCAV EDI had 2 weapon bays (when he destroyed the SCUD, launcher - a little earlier) Does your moddel have 2 weapon bays? It will do. Have finished the model development prototype in MSFS2002. It is available for download from this site here: http://forum.combatace.com/index.php?autoc...p;showfile=7410 Now the model conversion / completion for Thirdwire sims can begin in earnest (real aircraft work aside lol). Will be back to asking silly questions in earnest soon... mainly about weapons loads etc... Edited October 7, 2008 by Moorkey Quote
Viggen Posted October 9, 2008 Posted October 9, 2008 Well, there's one down. Want me to do some further testing? Quote
DANZ300ZX Posted October 16, 2008 Posted October 16, 2008 I"M looking foward to your E.D.I for the WOE ,i'm sure it will be wickedly awsome when you finish with it!!keep up the excellent MOORKEY!!!! Quote
_black_system_ Posted October 30, 2008 Posted October 30, 2008 I am experiencing some technical dificulties with your plane. It has gone completley heywire!!! LOL OK im running FSX deluxe with acceleration addon and i cant even see the ucav where u select what do u wanna fly. I got it one time and wings and other stuff on the aircraft ceep dispering and reapering and so on. Any ideas? Quote
Moorkey Posted October 30, 2008 Posted October 30, 2008 I am experiencing some technical dificulties with your plane. It has gone completley heywire!!! LOL OK im running FSX deluxe with acceleration addon and i cant even see the ucav where u select what do u wanna fly. I got it one time and wings and other stuff on the aircraft ceep dispering and reapering and so on. Any ideas? Sorry, but you have me stumped there, as I know little of FSX, due to hardware limitations. I'll have an ask around the people at work. Quote
_black_system_ Posted November 1, 2008 Posted November 1, 2008 Well i found out what the problem was. YOUR PLANE IS NOT COMPATABLE WITH ACCELERATION for some reaon. I uninstalled acceleration and tested it and it worked great. Reinstalled again and presto, here is your problem. I think the textures anren´t compatable u know. Just for the info. Quote
84TurboFour Posted January 12, 2009 Posted January 12, 2009 Well i found out what the problem was. YOUR PLANE IS NOT COMPATABLE WITH ACCELERATION for some reaon. I uninstalled acceleration and tested it and it worked great. Reinstalled again and presto, here is your problem. I think the textures anren´t compatable u know. Just for the info. I'm not suprised actually, Accel broke a LOT of addons for FSX, something with the way it handles textures/glass or something along thouse lines. Now not only do you have FS2k4/FSX you have FSX/FSXsp2....LOL Anyways, any update on this for SFG??? Not tryin to rush or anything, just noticed there haddent been any posts in a while, was lookin great. Quote
Moorkey Posted January 12, 2009 Posted January 12, 2009 Anyways, any update on this for SFG??? Not tryin to rush or anything, just noticed there haddent been any posts in a while, was lookin great. Sorry I have been a stranger around these parts. Work commitments and various trips to the docs have laid me low for a bit. ***EDI UPDATE*** EDI is now, after much quarreling and faffing, in 3DS Max, and is being boolean'ed to death as we speak... Quote
84TurboFour Posted January 16, 2009 Posted January 16, 2009 (edited) Anyways, any update on this for SFG??? Not tryin to rush or anything, just noticed there haddent been any posts in a while, was lookin great. Sorry I have been a stranger around these parts. Work commitments and various trips to the docs have laid me low for a bit. ***EDI UPDATE*** EDI is now, after much quarreling and faffing, in 3DS Max, and is being boolean'ed to death as we speak... Hey not a problem at all bro, was just courious is all. Take care of your self first, simming/modding comunities mean nothing with out a little real life thrown in the mix every now and again...LOL Edited January 16, 2009 by 84TurboFour Quote
DANZ300ZX Posted April 12, 2009 Posted April 12, 2009 So have you gotten anywhere with your sfg model ?? I know what its like to be overwhelmed with work and travel !!! keep the faith it'll get done sooner or later !!your other edi model is Great !!! i enjoyed it !!!here's pics of my TALON 1/24 scale model ,hope you like it ........................ :yes: Quote
zulufire122 Posted September 16, 2009 Posted September 16, 2009 do you no were i could get this software at a low cost or simaliar software that is free? if u do plz rell me! Quote
EricJ Posted September 21, 2009 Posted September 21, 2009 http://forum.combatace.com/index.php?showtopic=47281 Quote
enazenaz Posted October 9, 2009 Posted October 9, 2009 Hey Moory can you make the EDI UCAV Compatible for FSX please!!!!!!!!!!!!!!!!! Quote
DANZ300ZX Posted December 10, 2009 Posted December 10, 2009 Hi Mooorkey hows everything going with you?? Its been awhile since i've been here ,i hope all is going good for you!!! I was look'n yo see if there was a finished version of your EDI model for third wire WOE yet but ,i guess its not finished yet or i couldnt find it ,where u at with the development ??happy holidays to you and yours!! Quote
Jrgador Posted August 25, 2010 Posted August 25, 2010 Wonder Can i download 3d UCAV EDI?? but it not sf1 else just desgin drafting plane .. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.