+ianh755 Posted December 29, 2011 Author Posted December 29, 2011 thanks this is what i was looking for , now i would like to know if the GPS antennas was mounted on the nose-section like here on the GBU-49 here is a beta of all GBU´s i made GBU-49 with GPS An update to this post, I've found a pic of a complete UK Enhanced PW3 and it looks like the GPS AE is brown and only slightly raised, not like the EnPW2 or the PW4/GBU-49 types. If anyone can find a better pic it'd be helpful. Quote
+ravenclaw_007 Posted December 30, 2011 Posted December 30, 2011 (edited) one question is this tail-fuse-prob something very "British" or do all enhanced-paveway have this ???? i find it on all the 1000Lbs paveway-II and the GBU-24 RAF bomb´s enhanced or not GBU-24 UK 1000Lbs Paveway-II UK Edited December 30, 2011 by ravenclaw_007 Quote
+ianh755 Posted December 30, 2011 Author Posted December 30, 2011 (edited) LMAO, I haven't seen that in a while! In the RAF the Armourers are generally known for being knuckle-dragging low-brow simpletons (and about 80% of the time thats right!) so while it's probably not on every bomb as an official marking (DRILL would be though) it wouldn't surprise me if an Armourer in a bomb dump had scribbled this on the tail units he was working on just to let the guys building the whole package know that it was definitely the Enhanced Tail Unit (we'll probably still have non-enhanced ones store somewhere too). ***EDIT*** Sorry Ravenclaw, I reread your post and I now understand you're asking about the Fusing rather than the wording (Doh!). Yes that is a British Fuse and should only be on UK bombs. The airflow over the fins spins the blades which arms the fuse and you can see the safety wire which attaches to the pylon and stops the vanes/fins turning while it's on the A/C and snaps when the bomb is released. It used to be an Armourer "thing" to collect these (and cannon shells) as trophies proving that the bomb they had loaded/worked on had been dropped on something. I'll pop around to 12SQN tomorrow and take a bunch of pics of their standard PW3 they have on display (we've got a Sea Eagle, WE177 and Storm Shadow on 617). PS I found some up close pics of the nose of the Enhanced Paveway 2 as well (you may already have the bottom two) - Edited December 30, 2011 by ianh755 Quote
+ravenclaw_007 Posted December 30, 2011 Posted December 30, 2011 thanks for pointing me on the writing it seem´s that the reason for the "enhanced" on it is that the tail section is longer then the normal one or to be more specific the plastic-cover (with the teeth) between the BLU-109 body and the tail-section is longer then the normal one it is at almost doppel as wide as the normal one i dont know if this is because of the tail-fuse or the "enhanced" normal GBU-24 UK GBU-24 Quote
+ianh755 Posted December 30, 2011 Author Posted December 30, 2011 (edited) That "extra fatter bit" on the rear of the warhead - forward of the teeth is about 6in (15cm) longer I think and around 4in (12cm) to the radius. It's there to allow us to fit our UK fuse which is bigger than the US ones and has more bits (technical term ) inside for anti-tamper etc! I'll try and get a better measurement of it if possible tomorrow (maybe too high off the ground). Edited December 30, 2011 by ianh755 Quote
+ianh755 Posted December 31, 2011 Author Posted December 31, 2011 (edited) Ravenclaw - Hit the jackpot! Went around the camp taking piccys of the different stuff we've got and got you this - 27 high Rez pics (3648x2736) of an Enhanced Paveway 3, 16 of a TV Guided Martel AJ-168, 16 of a Sea Eagle and 23 of a WE-177 (Storm Shadow display model removed due to high winds here, AIM-9L we've already got so I didn't bother). They're all shrunk down to 1024x768 in this 11Mb zip file (full size is 300Mb!) so let me know which ones you want as full size and I'll upload them for you. http://ianhenshall.com/sf2/weaponspicstiny.rar Here's the measurement pic for the extra section - ***EDIT*** it's 5.5in or 14cm from the otherside of the silver band. Edited December 31, 2011 by ianh755 Quote
+ravenclaw_007 Posted December 31, 2011 Posted December 31, 2011 you have paveway-III and i´m looking for pictures Thanks for that one Quote
+ravenclaw_007 Posted January 1, 2012 Posted January 1, 2012 (edited) GBU-24 Paveway-III update includet the GBU-24 Paveway_III UK Edited January 1, 2012 by ravenclaw_007 1 Quote
+ravenclaw_007 Posted January 4, 2012 Posted January 4, 2012 is done i just dont have time to make all the skins for it i have all the sidewinders done a year ago and this morning i was able to make a basic skin for the 9M , i realy need more hands and a lot more time to finish all that is done in 3d but dont have any skins Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.