Nesher RWR

[RustyKurnass 653]

Sorry but also this is cause of old inis?

 

[RustyKurnass 653]

Sorted!

Again old DATA.ini, extracted and installed from stock B-57B and all work good!

[RustyKurnass 653]

Ehi guys,

I think said this before but...

I've YAP F-100F ;I know that is a SF1 bird but work pretty well in SF2 but I've two minor issue: the tanks are without skin ( I've already added the tank skins as per normal in the skin folders) and the Loadout.ini pratically is like if can't be read,I need to load the plane/s at every single mission and consequently lack for the AI in Campaign

Any idea/help?

[Wrench 9,471]

look at the tanks in the LOD viewer, it'll list the skin maps. Since not a lot of us have it ... hard to begin guessing. But I'll bet there's a mis-match between the data ini and loadout ini as to station numbering, or missing weapons (which makes NO sense). Or a mission type being flown on a terrain that doesn't have it set?? (guessing!)

the tanks are most likely a weapon, so the skins would go in that folder, not the aircraft's skin folder. That's only for sF2 aircraft.

[RustyKurnass 653]

45 minutes ago, Wrench said:

look at the tanks in the LOD viewer, it'll list the skin maps. Since not a lot of us have it ... hard to begin guessing. But I'll bet there's a mis-match between the data ini and loadout ini as to station numbering, or missing weapons (which makes NO sense). Or a mission type being flown on a terrain that doesn't have it set?? (guessing!)

the tanks are most likely a weapon, so the skins would go in that folder, not the aircraft's skin folder. That's only for sF2 aircraft.

I try to be more precise:

When bought the YAP pack,I've long time that not play at SF1 but the games were installed on my old PC and this way I'll able to install the plane. At this point I've copied and past on SF2 only the planes and relative decals in the appropriate folders.

When I changed to my currently PC.I saved the F-100F and relative decals on an external HD as I've no interess to anything else,even the Wings Over Series,ok?

So,with the new PC I re-installed all the SF2 Games,DLCs,etc and created my modded games/folders and ,obviously, added the F-100F to replace the 100D_68_WW from SF2 Vietnam Exp Gold.

The planes can be used in total tranquillity,the skins and decals are perfect,the only issues are the aforomentioned.

About the Loadout.ini  and the DATA.ini  possible mismatch,I checked and all the stations numbers match each others, but at any mission I haven't the weapons I've added in the Loadout.ini for the various type of missions,but anyway I can add ALL I want from the loadout screen. The tanks are those of the SF2 series and not the SF1 ones,again I can load them but are "bare metal". 'Cause in SF",if I'm right, the tank skin will be in the plane skin folder,I added there the image but nothing.

What make me nervous is the Loadout problem,as the planes in the Campaign fly the Sead or Armed Recon missions at which destined with only the guns...with the result that are pratically ineffective and useless

 

 

[Wrench 9,471]

which tank is called for in the data ini, on the fuel tank stations?

below is from the WoE F-100D (yes, I still keep a couple 1stGens around for "spare parts" -LOL!!)

[RightWingStation2]
SystemType=WEAPON_STATION
StationID=4
StationGroupID=2
StationType=EXTERNAL
AttachmentPosition=3.02,-0.93,-0.83
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=1360.80
AllowedWeaponClass=BOMB,FT
AttachmentType=NATO,USAF
ModelNodeName=pylon_right_middle
PylonMass=163.2
PylonDragArea=0.03
FuelTankName=Tank335_F100

[LeftWingStation3]
SystemType=WEAPON_STATION
StationID=5
StationGroupID=3
StationType=EXTERNAL
AttachmentPosition=-1.55,1.80,-1.04
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=680.40
AllowedWeaponClass=BOMB,CGR,RP,FT,ARM,TER
AttachmentType=NATO,USAF
ModelNodeName=pylon_left_inner
PylonMass=81.6
PylonDragArea=0.03
FuelTankName=Tank200_F100

the statements in bold, of course! 

also, check the attachment types, although they should be "stock" for when the plane was released. The SF2 versions have different names., as they're built into the aircraft lod (but you knew that!!)

[+yakarov79 10,532]

yap F-100F uses Tank335-F100C and Tank335_F100C (silver and camo) both should be included in yap set. Each bitmap skin should be in the weapon folder not in aircraft skin folder (tank is not a part of airframe)

look for errors in  aircraft.ini  loadout.ini etc. maybe there is a misspell or something. 

 

 

[RustyKurnass 653]

Ok, now I haven't access at any SF1 weapons as I'don't have SF1 related games in my PC except the F-100F/decals, at least 'till we have some Hun tanks in the SF1 download forum(?).

Here the pylons from the F-100F data

[LeftWingStation1]
SystemType=WEAPON_STATION
StationID=1
StationGroupID=1
StationType=EXTERNAL
AttachmentPosition=-4.30,-1.925,-0.917
AttachmentAngles=0.0,-2.4,0.0
LoadLimit=453.60
AllowedWeaponClass=BOMB,RP
AttachmentType=USAF,NATO
ModelNodeName=pylon_left_outer
PylonMass=55
PylonDragArea=0.02

[RightWingStation1]
SystemType=WEAPON_STATION
StationID=2
StationGroupID=1
StationType=EXTERNAL
AttachmentPosition=4.30,-1.925,-0.917
AttachmentAngles=0.0,-2.4,0.0
LoadLimit=453.60
AllowedWeaponClass=BOMB,RP
AttachmentType=USAF,NATO
ModelNodeName=pylon_right_outer
PylonMass=55
PylonDragArea=0.02

[LeftWingStation2]
SystemType=WEAPON_STATION
StationID=3
StationGroupID=2
StationType=EXTERNAL
AttachmentPosition=-3.015,-0.61,-0.925
AttachmentAngles=0.0,-2.9,0.0
LoadLimit=1360.80
AllowedWeaponClass=BOMB,FT
AttachmentType=USAF,NATO
ModelNodeName=pylon_left_middle
PylonMass=163.2
PylonDragArea=0.03
FuelTankName=TANK335_F100
NoJettisionTank=FALSE

[RightWingStation2]
SystemType=WEAPON_STATION
StationID=4
StationGroupID=2
StationType=EXTERNAL
AttachmentPosition=3.015,-0.61,-0.925
AttachmentAngles=0.0,-2.9,0.0
LoadLimit=1360.80
AllowedWeaponClass=BOMB,FT
AttachmentType=USAF,NATO
ModelNodeName=pylon_right_middle
PylonMass=163.2
PylonDragArea=0.03
FuelTankName=TANK335_F100
NoJettisionTank=FALSE

[LeftWingStation3]
SystemType=WEAPON_STATION
StationID=5
StationGroupID=3
StationType=EXTERNAL
AttachmentPosition=-1.506,2.00,-1.099
AttachmentAngles=0.0,-2.6,0.0
LoadLimit=680.40
AllowedWeaponClass=BOMB,RP,FT,ARM,TER,2BR
AttachmentType=USAF,NATO
ModelNodeName=pylon_left_inner
PylonMass=81.6
PylonDragArea=0.03
FuelTankName=Tank200_F100

[RightWingStation3]
SystemType=WEAPON_STATION
StationID=6
StationGroupID=3
StationType=EXTERNAL
AttachmentPosition=1.506,2.00,-1.099
AttachmentAngles=0.0,-2.6,0.0
LoadLimit=680.40
AllowedWeaponClass=BOMB,RP,FT,ARM,TER,2BR
AttachmentType=USAF,NATO
ModelNodeName=pylon_right_inner
PylonMass=81.6
PylonDragArea=0.03
FuelTankName=Tank200_F100

 

And those of the  F-100D_68

[LeftWingStation1]
SystemType=WEAPON_STATION
StationID=1
StationGroupID=1
StationType=EXTERNAL
AttachmentPosition=-4.52,-2.27,-0.84
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=350.0
AllowedWeaponClass=BOMB,RP,EP
AttachmentType=NATO,USAF
ModelNodeName=pylon_left_outer
PylonMass=63.50
PylonDragArea=0.02

[RightWingStation1]
SystemType=WEAPON_STATION
StationID=2
StationGroupID=1
StationType=EXTERNAL
AttachmentPosition=4.52,-2.27,-0.84
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=350.0
AllowedWeaponClass=BOMB,RP,EP
AttachmentType=NATO,USAF
ModelNodeName=pylon_right_outer
PylonMass=63.50
PylonDragArea=0.02

[LeftWingStation2]
SystemType=WEAPON_STATION
StationID=3
StationGroupID=2
StationType=EXTERNAL
AttachmentPosition=-3.02,-0.83,-0.86
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=1360.80
AllowedWeaponClass=BOMB,FT
AttachmentType=NATO,USAF
ModelNodeName=pylon_left_middle
PylonMass=63.50
PylonDragArea=0.03
FuelTankName=Tank335_F100
FuelTankNodeName=droptank_335_L

[RightWingStation2]
SystemType=WEAPON_STATION
StationID=4
StationGroupID=2
StationType=EXTERNAL
AttachmentPosition=3.02,-0.83,-0.86
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=1360.80
AllowedWeaponClass=BOMB,FT
AttachmentType=NATO,USAF
ModelNodeName=pylon_right_middle
PylonMass=63.50
PylonDragArea=0.03
FuelTankName=Tank335_F100
FuelTankNodeName=droptank_335_R

[LeftWingStation3]
SystemType=WEAPON_STATION
StationID=5
StationGroupID=3
StationType=EXTERNAL
AttachmentPosition=-1.55,1.81,-1.04
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=680.40
AllowedWeaponClass=BOMB,CGR,EOGR,RP,FT,TER
AttachmentType=NATO,USAF
ModelNodeName=pylon_left_inner
PylonMass=63.50
PylonDragArea=0.03
FuelTankName=Tank200_F100
FuelTankNodeName=droptank_200_L

[RightWingStation3]
SystemType=WEAPON_STATION
StationID=6
StationGroupID=3
StationType=EXTERNAL
AttachmentPosition=1.55,1.81,-1.04
AttachmentAngles=0.0,-3.0,0.0
LoadLimit=680.40
AllowedWeaponClass=BOMB,CGR,EOGR,RP,FT,TER
AttachmentType=NATO,USAF
ModelNodeName=pylon_right_inner
PylonMass=63.50
PylonDragArea=0.03
FuelTankName=Tank200_F100
FuelTankNodeName=droptank_200_R

 

The Attachment and AllowedWeapons  look the same for me ( not the tanks),so I don't understand why the game don't load weapons from the Loadout:ini.Here the ini lines

 

// Station 1 = Left Outer Underwing Pylon
// Station 2 = Right Outer Underwing Pylon
// Station 3 = Left Center Underwing Pylon
// Station 4 = Right Center Underwing Pylon
// Station 5 = Left Inner Underwing Pylon
// Station 6 = Right Inner Underwing Pylon
// Station 7 = Sidewinder Station 1 (replaces station 5)
// Station 8 = Sidewinder Station 2 (replaces station 6)
// Station 9 = Sidewinder Station 3 (replaces station 5)
// Station 10 = Sidewinder Station 4 (replaces station 6)
// Station 11 = Centerline Station
// Station 12 = DragChute

[FACMisty]
Loadout[01].WeaponType=LAU-3A_Mk40_M259
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M259
Loadout[02].Quantity=1
Loadout[03].WeaponType=Tank335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=TANK335_F100
Loadout[04].Quantity=1

[FACMistyC]
Loadout[01].WeaponType=LAU-3A_Mk40_M259
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M259
Loadout[02].Quantity=1
Loadout[03].WeaponType=TANK335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=TANK335_F100
Loadout[04].Quantity=1
Loadout[12].WeaponType=Dragchute1
Loadout[12].Quantity=1

[SEAD1]
Loadout[01].WeaponType=LAU-3A_Mk40_M151c
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M151c
Loadout[02].Quantity=1
Loadout[03].WeaponType=TANK335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=TANK335_F100
Loadout[04].Quantity=1
Loadout[12].WeaponType=Dragchute1
Loadout[12].Quantity=1

[SEAD2]
Loadout[01].WeaponType=LAU-3A_Mk40_M151c
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M151c
Loadout[02].Quantity=1
Loadout[03].WeaponType=TANK335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=TANK335_F100
Loadout[04].Quantity=1
Loadout[05].WeaponType=AGM-45A
Loadout[05].Quantity=1
Loadout[06].WeaponType=AGM-45A
Loadout[06].Quantity=1

 

I don't note mismatch about the pylons numbers either...

 

[RustyKurnass 653]

Ok,solved the tanks skin,I created the tanks folder in the Weapons and now have a camo  working for the tanks.

Still need load the weapons manually in the briefing/loadout screen

[+Nyghtfall 2,102]

I guess your problem is, that the game doesn't know what to do with loadouts called FACMisty or SEAD1...

Have a look at a loadout.ini from a stock-plane to see, what is possible.

For "automatic" loadout, the name should match the mission your flying (Strike or Recon does work for example). There's also a command to use custom-named loadouts as alternative way. I can post that later, as I'm not at my computer and I cannot remember exactly. 😉

[RustyKurnass 653]

1 hour ago, Nyghtfall said:

I guess your problem is, that the game doesn't know what to do with loadouts called FACMisty or SEAD1...

Have a look at a loadout.ini from a stock-plane to see, what is possible.

For "automatic" loadout, the name should match the mission your flying (Strike or Recon does work for example). There's also a command to use custom-named loadouts as alternative way. I can post that later, as I'm not at my computer and I cannot remember exactly. 😉

YES!

So stupidly evident and I don't notef it,shame!

 

Rename the loadout did the trick!

[FAC]
DefaultFor=CAS,ARMED_RECON
Loadout[01].WeaponType=LAU-3A_Mk40_M259
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M259
Loadout[02].Quantity=1
Loadout[03].WeaponType=TANK335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=TANK335_F100
Loadout[04].Quantity=1

[SEAD]
Loadout[01].WeaponType=LAU-3A_Mk40_M151c
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M151c
Loadout[02].Quantity=1
Loadout[03].WeaponType=TANK335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=TANK335_F100
Loadout[04].Quantity=1
Loadout[05].WeaponType=CBU-24B
Loadout[05].Quantity=1
Loadout[06].WeaponType=CBU-24B
Loadout[06].Quantity=1
Loadout[12].WeaponType=Dragchute1
Loadout[12].Quantity=1

[SEAD_1966]
StartDefaultDate=01/01/1966
DefaultFor=SEAD
Loadout[01].WeaponType=LAU-3A_Mk40_M151c
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M151c
Loadout[02].Quantity=1
Loadout[03].WeaponType=TANK335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=TANK335_F100
Loadout[04].Quantity=1
Loadout[05].WeaponType=AGM-45A
Loadout[05].Quantity=1
Loadout[06].WeaponType=AGM-45A
Loadout[06].Quantity=1

[Recon]
Loadout[01].WeaponType=LAU-3A_Mk40_M156
Loadout[01].Quantity=1
Loadout[02].WeaponType=LAU-3A_Mk40_M156
Loadout[02].Quantity=1
Loadout[03].WeaponType=Tank335_F100
Loadout[03].Quantity=1
Loadout[04].WeaponType=Tank335_F100
Loadout[04].Quantity=1
Loadout[11].WeaponType=ReconPod
Loadout[11].Quantity=1

 

Thanks guys, you're the best!