Jump to content
Sign in to follow this  
GKABS

USMC USA, NATO, and Israel M109A2 Howitzer

Recommended Posts

USMC USA, NATO, and Israel M109A2 Howitzer


Hello and thank you for downloading my work.

What's included:
Two USMC USA, NATO, and Israel M109A2 howitzer models one with the Spades up and the other is down.

All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)

Installation:

Copy files to their proper folder

//Please change the XXX with the correct number from your //Soundlist:

[SoundList]
SoundFileXXX=155MM_M126
SoundFileXXX=TankEngine
SoundFileXXX=GKTankTrack
SoundFileXXX=50caliber

[TankEngine]
Priority=LOW
3DSound=TRUE
DopplerEffect=TRUE
Looped=TRUE
NumBuffers=2
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100

[GKTankTrack]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=FALSE
Looped=TRUE
NumBuffers=4
MaxDist=500.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100

[155MM_M126]
Priority=NORMAL
Looped=FALSE
NumBuffers=2
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100

[50caliber]
Priority=NORMAL
Looped=TRUE
NumBuffers=4
3DSound=TRUE
DopplerEffect=FALSE
MaxDist=1000.000000
MinDist=50.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100

If you need any further help please read the Knowledge Base at:
 
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

1.0.0

LICENSE:

You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net

Credit goes to the following:

Third Wire for making this outstanding game.

compufat for helping me with making these textures big thank you.

Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.

Google for some photos and information.

And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.


Software used:

3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop


If you need any assistance please contact me at 
gkabs@gkabs.net
Site
https://gkabs.net
https://gulfknights.net


 

  • Like 1
  • Thanks 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By GKABS

      Speaking to Breaking Defense, Ali Al Hashim, a Kuwait-based defense analyst has said that the US Marine Corps (USMC) is interested in taking over kuwaiti F/A-18s when they are retired from service (the country is currently fielding 27 legacy F-18 Hornets, plus six F-18D trainers).

      Malaysia and Tunisia are said to be interested in acquiring those legacy Hornets, however, the USMC will have priority as approval is required from the US government before Kuwait can sell the jets to other nations.

      “Kuwait cannot sell the legacy Hornets to another country without the prior approval of the US Navy,” said Hashim. “There are reports that the US Marines command appears to be interested in acquiring the Kuwait fleet of Hornets, and negotiations were underway between the two sides.”

      According to Alert5, the USMC is planning to retire its F/A-18s in 2030 and has given its existing F/A-18 fleet some upgrades such as a new AN/APG-79(v)4 radar and ejection seats.

      The Kuwait Air Force received the first two of 28 Typhoon jet fighters being built by Leonardo were last December, while the 28 F/A-18E/F Super Hornet block 3 were reportedly delivered last September by Boeing to the US Navy. Kuwaiti pilots training on the Typhoons will start flying the fighters to Kuwait during this year and well into the next one.

      Hashim explained that transferring the Super Hornets to Kuwait will take longer than planned due to the delayed infrastructure work at Ahmed Al Jaber Air Base because of the pandemic.

      According to Abdullah Al Foudary, the former Kuwait Air Force commander, selecting the Super Hornet to replace the Hornets was a “natural and logical move.” Instead he said that the additional selection of the Typhoon came in line with a policy to “unify the platforms with other members of the Gulf Cooperation Council (GCC),” an alliance of Saudi Arabia, United Arab Emirates, Kuwait, Qatar, Bahrain, and Oman.

      "Saudi Arabia and Oman had procured the Eurofighter Typhoon and Qatar was considering it and recently proceeded with the purchase,” Al Foudary pointed out. “The idea here is that GCC air forces would be easily interoperable and will also be able to support one another with spare parts if they all purchased the same platforms.”
    • By dtmdragon


      View File F-4E IAF Yom Kippur war pack
      F-4E Kurnass Israeli Airforce Yom Kippur war pack
       
      There were multiple separate F-4E deliveries prior to the 1973 war and due to the variations in the Blocks all sorts of different configurations of ECM antenna, strike camera, slats/ flaps, 'slime' lights,  MIDAS4 etc. Not to mention local upgrades of 'slime' lights, MIDAS4 muzzle mods and slat instillations. Now throw in the Operation Nickle Grass emergency aid ex USAF aircraft during the war! I have rounded them all up into 3 in-game variants:
       
      Included:
      - F-4E_Kurnass          (with & without 'slimers')
      - F-4E_Kurnass_72    (Hard-Wing & MIDAS4)    
      - F-4E_Kurnass_73    (Soft-Wing & MIDAS4)

      Animation / Function
      - Canopy
      - Hook
      - Air Refuel
      - Wing fold ______________ only on hard wing F-4E´s
      - Gun Vent ______________ automatic when gun is fired or as soon as the landing gear is deployed
      - Brake Chute____________ works with the Air Brake below 150kts
      NOTE:
      - This mod replaces existing TW and TMF aircrafts , please remove the existing folders before installing this mod , the existing skins / textures will no longer fit !!!!
      - Stock TW squadron decals are used but with higher resolution detailed versions that have panel lines and rivets etc for the four Yom Kippur war Kurnass squadrons 69, 107, 119 & 201.
      - Some texture folder names may seem unusual but it is to create continuity to avoid the bug that stops an aircraft upgrading during a campaign if the texture folder names don't match.

      Installation:
      - Drop all files into your mod folder the way they are setup in this pack and overwrite if ask to
      - If you are unsure about the way how mods are installed, check the knowledge base at CombatAce!
      - Campaigns folder contains the stock TW 1973 Yom Kippur War campaign modified to include the aircraft, weapons and textures in this pack.

      Credit
      - original model by TW , BPAO , Crab_02
      - cockpits from TW
      - F-4E USAF pack uploaded by ravenclaw_007
      - TISEO made by Crusader
      - new updated model , textures and weapons by ravenclaw_007
      - myself for modification of the F-4E USAF pack into an Israeli specific F-4E Kurnass pack with IAF textures, weapons and loadouts
       
      CA fair use agreement applies.
      Dan (dtmdragon)
      Submitter dtmdragon Submitted 07/17/2022 Category F-4  
    • By dtmdragon
      F-4E Kurnass Israeli Airforce Yom Kippur war pack
       
      There were multiple separate F-4E deliveries prior to the 1973 war and due to the variations in the Blocks all sorts of different configurations of ECM antenna, strike camera, slats/ flaps, 'slime' lights,  MIDAS4 etc. Not to mention local upgrades of 'slime' lights, MIDAS4 muzzle mods and slat instillations. Now throw in the Operation Nickle Grass emergency aid ex USAF aircraft during the war! I have rounded them all up into 3 in-game variants:
       
      Included:
      - F-4E_Kurnass          (with & without 'slimers')
      - F-4E_Kurnass_72    (Hard-Wing & MIDAS4)    
      - F-4E_Kurnass_73    (Soft-Wing & MIDAS4)

      Animation / Function
      - Canopy
      - Hook
      - Air Refuel
      - Wing fold ______________ only on hard wing F-4E´s
      - Gun Vent ______________ automatic when gun is fired or as soon as the landing gear is deployed
      - Brake Chute____________ works with the Air Brake below 150kts
      NOTE:
      - This mod replaces existing TW and TMF aircrafts , please remove the existing folders before installing this mod , the existing skins / textures will no longer fit !!!!
      - Stock TW squadron decals are used but with higher resolution detailed versions that have panel lines and rivets etc for the four Yom Kippur war Kurnass squadrons 69, 107, 119 & 201.
      - Some texture folder names may seem unusual but it is to create continuity to avoid the bug that stops an aircraft upgrading during a campaign if the texture folder names don't match.

      Installation:
      - Drop all files into your mod folder the way they are setup in this pack and overwrite if ask to
      - If you are unsure about the way how mods are installed, check the knowledge base at CombatAce!
      - Campaigns folder contains the stock TW 1973 Yom Kippur War campaign modified to include the aircraft, weapons and textures in this pack.

      Credit
      - original model by TW , BPAO , Crab_02
      - cockpits from TW
      - F-4E USAF pack uploaded by ravenclaw_007
      - TISEO made by Crusader
      - new updated model , textures and weapons by ravenclaw_007
      - myself for modification of the F-4E USAF pack into an Israeli specific F-4E Kurnass pack with IAF textures, weapons and loadouts
       
      CA fair use agreement applies.
      Dan (dtmdragon)
    • By GKABS


      View File M109A1 howitzer
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M109A1 howitzer models.
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please change the XXX with the correct number from your //Soundlist:
      [SoundList]
      SoundFileXXX=155MM_M126
      SoundFileXXX=TankEngine
      SoundFileXXX=GKTankTrack
      SoundFileXXX=50caliber
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [GKTankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [155MM_M126]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [50caliber]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for helping me with the textures big thank you.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.

      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Site
      gkabs.net
      gulfknights.net
       
      Submitter GKABS Submitted 02/25/2022 Category Ground Object Mods  
    • By GKABS
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      M109A1 howitzer models.
      All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
      Installation:
      Copy files to their proper folder
      //Please change the XXX with the correct number from your //Soundlist:
      [SoundList]
      SoundFileXXX=155MM_M126
      SoundFileXXX=TankEngine
      SoundFileXXX=GKTankTrack
      SoundFileXXX=50caliber
      [TankEngine]
      Priority=LOW
      3DSound=TRUE
      DopplerEffect=TRUE
      Looped=TRUE
      NumBuffers=2
      MaxDist=250.000000
      MinDist=10.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [GKTankTrack]
      Priority=NORMAL
      3DSound=TRUE
      DopplerEffect=FALSE
      Looped=TRUE
      NumBuffers=4
      MaxDist=500.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [155MM_M126]
      Priority=NORMAL
      Looped=FALSE
      NumBuffers=2
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1500.000000
      MinDist=400.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      [50caliber]
      Priority=NORMAL
      Looped=TRUE
      NumBuffers=4
      3DSound=TRUE
      DopplerEffect=FALSE
      MaxDist=1000.000000
      MinDist=50.000000
      InsideConeAngle=360
      OutsideConeAngle=360
      ConeOutsideVolume=100
      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat for helping me with the textures big thank you.
      Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
      Google for some photos and information.
      And finally not forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.

      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Site
      gkabs.net
      gulfknights.net
       
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..