ojcar

It's an interesting question. I play it Normal, because the Hard mode only lower your mates skill and give more skill to the enemies, over riding the values in the Campaign data.ini. In my campaigns I put squadrons between 50-100 experience in all sides, so you can encounter true aces or true noobs. Of couse, if you are in a poor quality unit and are fighting against JG1 or the Cicognes, for example, it means bad news to your squadron mates. About the unrealistic kill numbers, have in mind some things: -You are a virtual pilot and through the years surely you have been killed in every possible way. Only that you are alive and have learned from experience. -Surely you have read a lot of books about real air tactics in every war. You know the strong and weak points of a lot of planes even before flying them. -Our virtual enemies are far more agressive than real pilots. They'll fight even in bad tactical situation, outnumbered, etc -Our victory claims are confirmed all by the computer

The more the tanks, the more the targets! What's wrong with an entire tank regiment or brigade moving? Think about some battles, like those in Golan heights, or Kurks, if WWII is your thing. Of couse, not real use for my main thing (WWI stuff)

I didn't knew that, Wrench! No wonder, since Desert Storm is a little too modern to my taste! Believe it or not, I have never fly the F-15, go figure!. But I promise to play with modern stuff when the new DS will be available, and have to purchase NA too...

Thinking about my own FE2 campaigns (the Armchair Aces mod) I had an idea about Armed Recon missions. It can be useful in mods with massive armored armies (Dessert Storm, Nato Fighters, etc) -Go to your objects folder, make a copy of any tank or AFV you like. Rename it to your own taste. -Go to the new object .ini. Rename it to match the new folder name. -Go to the Data.ini of the object. Look for the GroundObjectRole= line and change it to TRANSPORT -Go to the Availability= ExportAvailability= and set it to your taste. I let it to be less common than the trucks. Then you'll have from time to time Armed Recon missions where you have to attack tank columns traveling to the front! True A-10/Su-25 fodder!!!!

If you have correctly followed Armchair Aces instructions, you have these skins already (but the grey and blue schemes were far more common for this aircraft)

About the F2B wing Lewis: In Peter01 FMs there is the F2Ba variant, (275Hp and no overwing Lewis). If you want more, you can download my F2B pack from here, and then have the 190 and 220Hp versions as well. I have added a second (virtual only, sorry) machine gun for the observer in the 220 and 275 Hp versions and corrected the POV in cockpit as well. All three versions are all versions used in Armchair aces 1917 and 1918.

Don't worry, MigBuster, FE2 wasn't patched for ages, and I think this is deffinitive. Besides, nobody forces you to patch!

Yes, I know an I'm sad about it. But the flame war was started in another forum (the official ROF one). I don't want this happening here. I simply enjoy the games (my fav is FE2, but I fly ROF from time to time, and I'm waiting for OFF2 to join OFF community).

Kill me if you want, I have not NA yet (not patched my games since Beta Oct 2011), because I like much more 50's and 60's jets, but the more I see about the new terrain engine and other changes, the more I like the old times. This game is about mods! If I wanted another LOMAC, I'd play LOMAC! We have traded our freedom of modding by fancy avionics and "better" terrain (if you call better to fly over an empty small terrain at half framerates). Thank God TK has forgotten FE2 to this patching fever!

Please, don't critisize other games here! This is FE/FE2. Each game has its strong and weak points. And the wwi sim community is very small. Let's not divide it in flame wars!

Wov, You are a talented man! . You have "put me in the cockpit" with your action reports! Maybe you can do a novel about Garth's career! PS: At the moment Flight Leader Harry Flashman has been forced to crash landing it's Nieuport 10. Only injoured in its moral... Their victor was an anonimous Bavarian crew flying their Pfalz Parasol recon plane.

In fact, if you shot down one of these with your Albatros, You'll be in serious trouble. It's a German plane. An AGO C.I

It's no secret I'm trying to have the old RB3D feeling. I like a lot the moddability and AI of FE, but OFF and ROF are great sims too, so if you can, try all of them.

You're right! Each Squadron has its level of experience in both sides (between 50 and 100). So, fighting against same plane could be a different experience each time. More experienced units will spawn aces more easily too!

September 1915? Sorry to say, but you have collided with a Nieuport 10 from nº1 RNAS Squadron (the very same unit I'm flying for now). No Nieuport 11's at this time in campaigns. If you choose same unit, you'll start with EI in August (historically only 2 EII in the Front at this time), EII in September and EIII in October. For a longer carrer in the EII, you'd better fly for Fokkerstaffel West in the Verdun map. Good luck!

Hello, friends! As promised I have updated both Armchair Aces 1915 and 1916. The changes are: -Rumpler CI added to campaigns -Fokker EII added to campaigns (new custom FM included). This is for you, 33LIMA. -Better researched planeset for Belgians -Support for the new Halberstadt version (corrected LOD)in Skunkworks forum. Good Flying!

Yes, you are right! Who needs fancy jets and missiles having bipanes instead? (only joking) Now I'm very tired, but tomorrow I'll update Armcair Aces 1915 and 1916 with this and some other changes.

Go download this!!! It's as pretty as Charlize Theron!

Don't forget Farman F 40, Halberstadt CLII and Roland DII (and proper Austrian Albatros).....We all are overwhelmin poor Stephen. If there are other modellers, I can make FMs for them too.

Rumplers (both CI and CIV) are very needed and among my favourites too .Be patient, friends! more (very beautiful) two seaters are coming for you

All units in this series are flyable in campaign (except the Zeppelins, that are flyable only in single mission), so you'll have all the two seaters action you want.

In fact there is groud action (I hope it works) at the correct times and the correct maps. It's needed some ground battles for your CAS missions. But not in 1915. In 1915 there is only a Fernch offensive in Verdun map (in September, I think). 1916 has the Verdun and Somme battles, so you can fly over the little men firing their rifles! The only thing it's the frontlines are the stock frontlines all the war

Well, you need (obviously) both planes (Skunkworks and Bortdafarm). -Go to your HalbD3 folder and change the name of the cockpit folder (mine is changed to -----cockpit) just in case something goes bad... -Go to your HalberstadtDII folder. Copy the cockpit folder into the HalbD3 folder. Copy the HalberstadtDII_cockpit.ini file into your HalbD3 folder. -Go to youy HalbD3 folder. Open the HalbD3.ini file with Notepad and edit it this way (only some changes in the [AircraftData.ini]). Don't touch anything more! [AircraftData] AircraftFullName=Halberstadt D.II AircraftShortName=Halberstadt D.II AircraftDataFile=HalbD3_data.ini CockpitDataFile=HalberstadtDII_cockpit.ini //CockpitDataFile=HalbD3_cockpit.ini HangarScreen=HalbD3_Hangar.bmp LoadoutFile=HalbD3_loadout.ini LoadingScreen=HalbD3_loading.bmp -Open the HalberstadtDII_COCKPIT.INI file. go for these two lines under [CockpitSeat001]: Position and Offset and change into this: Position=0.00,-0.815,0.765 Offset=0.0,0.05,-0.042 Save and you're done! PS: Of course I don't mind about your post. I'm very proud you like it so much!

Muahahahahahah! The kreaturre is ALIVE! (Skunkworks Halberstadt with Bortdafarm Halberstadt cockpit). This is the best I can. Far from perfect, but a little improvement. Are you interested?

About the Halberstadt, you can edit the HalbD3.ini file like me and you're done: [AircraftData] AircraftFullName=Halberstadt D.II AircraftShortName=Halberstadt D.II AircraftDataFile=HalbD3_data.ini CockpitDataFile=HalbD3_cockpit.ini HangarScreen=HalbD3_Hangar.bmp LoadoutFile=HalbD3_loadout.ini LoadingScreen=HalbD3_loading.bmp I have the same cockpit issue, but I'm not a cockpit expert. Maybe you can use Bortdafarm cockpit in Skunkwoks model......