- DCS Aircraft Skins
- DCS Aircraft Mods
- DCS Singleplayer Missions
- DCS Multiplayer Missions
- DCS Campaigns
- DCS Object Mods
- DCS Sound Mods
- DCS Tracks / Videos / Tutorials
- DCS Utilities
- DCS Joystick Config Files
- DCS Misc. Files
- DCS Patches
-
F-4_Turkish Air Force.Panthers
By Guest
This skins are from Turkiash Airforce from Panther Squadron.All decals and markings are same as original.
219 downloads
0 comments
Updated
-
Su-25T USAF 74th FS (FT)
By EricJ
Su-25T USAF 74th FS, (FT)
While the Su-25T as a whole is a very capable combat jet within its own right, the aircraft will never be as capable as the A-10A or A-10C currently. However it does look good in a splash of European 1 and represents a fictional rendition of the aircraft in the 74th Fighter Squadron, 23rd Fighter Group, the “Flying Tigers”.
To install this skin simply cut and paste the folder into the Bazar/Liveries/Su-25T folder and in the Payload Editor, select “USAF 74th FS (FT)” and go fly. And for those with the appropriate mod can use this also for the USA side.
22 downloads
0 comments
Updated
-
FJ-3 VF-24 Corsairs Skin for DCS F-86F
By HomeFries
This is part of a series of US Navy and Marine Corps skin packs for the FJ-3/FJ-3M Fury, the navalized variant of the F-86 Sabre (the M version being Sidewinder capable).
Fighter Squadron 24 (the Corsairs which were later redesignated the VF-211 Checkmates, not to be confused with the VF-24 Renegades designated in 1959) flew the FJ-3 Fury for a short time (1956-1957) before transitioning to the F3H Demon. This skin pack features skins from the 1956-57 deployment aboard the USS Shangri-La (CVA 38) as part of Carrier Air Group 2 (CVG-2, Tailcode M).
Note: this skin pack uses an EXE installer that creates common texture folders and an autoexec.cfg (if you already have one, you can make manual changes). I would like your feedback on this system; if it works I intend to apply it to my other skin packs. If you have a 1.x version of this skin installed, then the installer will remove the old 1.x liveries and obsolete texture folders. Be sure to update any missions that used 1.x series skins.
A Note About Autoexec.cfg:
Rather than copying texture files to their respective livery folders, I prefer to use a series of common texture folders along with unique filenames. This allows a single instance of many of my common textures, and keeps the hard drive footprint to a minimum (especially nice if you run a SSD for your system drive).
The installer will add a series of folders to the DCS Texture path; if you do not have these folders created, then it is no problem. The autoexec.cfg included will automatically point to the Texture folder in your Saved Games\DCS folder, and regardless of whether you run the Open Alpha, Open Beta, or Release version of DCS, the path will always point to your Saved Games\DCS\Texture folder. Again, this saves space on your hard drive.
If you use your own Autoexec.cfg, then when prompted to overwrite you can click "no". This will create a file called autoexec.new, and you can manually make the updates as you like. Just don't modify the top line with the file date; this is used by the installer for version control. However, feel free to include it in your existing autoexec.cfg, so you don't get prompted to overwrite until there's another update to the autoexec.cfg.
If you inadvertently overwrite your autoexec.cfg, it is actually backed up as autoexec.old. Just open it and copy the appropriate information to the new file.
Updating from the 1.x series of FJ-3 Skins:
With the release of DCS World 1.5.4 and 2.0.3, the decal layer that once covered the entire model has been removed by Belsimtek. As such, organizational specific modex placement as well as modex placement on the wing is no longer possible. The modex (1xx-3xx) is now selected in the Mission Editor rather than by skin selection. For skins that have the BuNo on the tail, the last two digits of the modex are also used for the BuNo (this is not accurate, but just to allow a dynamic number on the tail).
Detail placement in textures based on USN skins by Crazyeddie.
Special thanks to SkateZilla for the awesome Photoshop template.
You are free to use any of the textures in other skins or projects as long as proper credit is provided in the readme file.
-Home Fries
9 downloads
0 comments
Updated
-
Su-25T Aggressor 1
By EricJ
This is a fictional skin, of an Su-25T of the 412th AB, 1st Squadron, Eastern MD, 2015. It is completely fictional and based off of the old USAF “European 1” scheme for the A-10A Warthog, before they switched to the two-tone grey scheme currently applied.
To install this skin simply cut and paste the folder into the “DCSWorld\Bazar\Liveries\Su-25T” and go fly. In the Payload Editor this one is named “Aggressor No.1” in the Paint Schemes drop down menu.
9 downloads
0 comments
Updated
-
L-39C Fictional South East Asia Scheme
By EricJ
This scheme is a simple “blank” scheme that I felt like doing for fun. To install simply copy and paste the Livery folder in DCSWorld/CoreMods/aircraft/L-39/Liveries folder, select USA and in the Payload Editor select “Fictional SEA Scheme” and go fly.
6 downloads
0 comments
Submitted
-
Su-25 United Nations [Fictional]
By EricJ
This was a request and he said it was okay to make it public. Nothing too special as the aircraft is all white with some weathering to break up the color. Other than that it's fairly simple, and with the Su-25 select "Su-25 UN" in the drop down menu for the Paint scheme.
9 downloads
0 comments
Submitted
-
SU-27 UkrLV Splinter
By viperrm64
This a fictional repaint of the DCS World/FC3 Su-27 Flanker in a Ukranian AF low-viz "Splinter" colour scheme.
Please read the readme file for installation.
Thank you.
Rob(viperrm64)Mason.
26 downloads
0 comments
Submitted
-
F/A-18C VFA-103 Jolly Rogers
By Jack
Fictional VFA-103 textures for F/A-18C
copy this folder to
Bazar\Liveries\f_a-18c
that is all
The pack contains that color schemes:
-VFA-103 CAG & Line Jet
56 downloads
0 comments
Submitted
-
F/A-18C VFA-37 CAG 2008 DCS
By EricJ
Just a DCS version of the VFA-37 CAG as depicted in 2008. Any questions or comments can be directed here:
33 downloads
0 comments
Submitted
-
Kamennomostskiy anti-tank SU-25
By jpm1
SU-25 mission made with Lock on 1.12b
Anti-tank
1 player
jpm1 jmar2252@yahoo.fr
134 downloads
0 comments
Updated
-
Ka-50 HMLA-167 Early [Fictional]
By EricJ
Ka-50 USMC HMLA-167 Early
Just another What If camo pattern for the Ka-50, showing the camouflage pattern used by the USMC in the 1980s prior to the change to the two-tone grey camouflage that is on AH-1W Cobras today.
To install this skin simply cut and paste the “us marines 4” folder in your DCSWorld\Bazar\Liveries\Ka-50 folder. In the Payload Editor select “HMLA-167 Early” and go fly.
13 downloads
0 comments
Submitted
-
A-10C Experimental Camos
By Jack
copy this folder to
Bazar\Liveries\A-10C
that is all
The pack contains that color schemes:
-S/N 76-530 "Flipper"
-S/N 76-552 "Peaunt"
If you like my job, please donate me here
31 downloads
0 comments
Submitted
-
RuAF Su-27v2
By viperrm64
This is a fictional skin pack (seven in all), for the DSC World/FC3 Su-27 Flanker. This is actually version 2 of this pack and contains seven repaints, all fictional, but trying to keep within Russian Air Force colour and colour scheme parameters. They are really just a play on colours using G.K.'s superb PSD DCS Su-27 template but some are more extensive repaints than others. You will notice skin RM7 is missing, this was removed for version 2 as it was TERRIBLE!!!!!, but I hope you will like the rest of them.
Please read the readme file carefully for installation. Please note the skins have been updated since I took the included screenshots.
Thanks for downloading my skins.
Rob(viperrm64)Mason.
28 downloads
0 comments
Submitted
-
Turkish Air Force C-130.201st Atak Filo
By Guest
This is real Turkish Air Force camuflage of C-130 from 201st Atak Squadroninstall it by using CDDS browser.Sorry I cant use LOMAN.
171 downloads
0 comments
Updated
-
0 comments
Updated
-
Zimster A-10
By Guest
Zimster A10 pack " Asymetrical" Loman compatible Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
127 downloads
0 comments
Updated
-
L-39C USAF Aggressor
By EricJ
This scheme is an adaptation of an F-15C scheme. To install simply copy and paste the Livery folder in DCSWorld/CoreMods/aircraft/L-39/Liveries folder, select USA and in the Payload Editor select “USAF Aggressor Splinter” and go fly.
10 downloads
0 comments
Submitted
-
L-39C VFC-12 Aggressor Splinter
By EricJ
This scheme is an adaptation of an F/A-18A VFC-12 scheme. To install simply copy and paste the Livery folder in DCSWorld/CoreMods/aircraft/L-39/Liveries folder, select USA and in the Payload Editor select “VFC-12 Aggressor Splinter” and go fly. Additional help from HomeFries, particularly his adjusted decals and warning stickers.
7 downloads
0 comments
Submitted
-
Zimster A-10
By Guest
Zimster A10 Pack "Snow" Loman compatible Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
419 downloads
0 comments
Updated
-
Area_88_Unicorn_by_Fusion
By Guest
Su-27 skin created for Double Echo by Fusion. One of his best works yet! This skin is based off of the Tiger 2 that Shin Kazama pilots in the animated TV series Area 88.
177 downloads
0 comments
Updated
-
0 comments
Updated
-
FJ-3 VF-73 Jesters Skin Pack for DCS F-86F
By HomeFries
This is part of a series of US Navy and Marine Corps skin packs for the FJ-3/FJ-3M Fury, the navalized variant of the F-86 Sabre (the M version being Sidewinder capable).
Fighter Squadron 73 flew the FJ-3 Fury from 1956 until its decommissioning in 1958. Originally part of Carrier Air Group 7 (CVG-7, Tailcode L), VF-73 was transferred to CVG-4 (Tailcode AD) for its 1957 deployment on the USS Randolph (CVA-15). This skin pack features skins from CVG-7 and the 1957 Randolph deployment with CVG-4.
Note: this skin pack uses an EXE installer that creates common texture folders and an autoexec.cfg (if you already have one, you can make manual changes). I would like your feedback on this system; if it works I intend to apply it to my other skin packs. If you have a 1.x version of this skin installed, then the installer will remove the old 1.x liveries and obsolete texture folders. Be sure to update any missions that used 1.x series skins.
A Note About Autoexec.cfg:
Rather than copying texture files to their respective livery folders, I prefer to use a series of common texture folders along with unique filenames. This allows a single instance of many of my common textures, and keeps the hard drive footprint to a minimum (especially nice if you run a SSD for your system drive).
The installer will add a series of folders to the DCS Texture path; if you do not have these folders created, then it is no problem. The autoexec.cfg included will automatically point to the Texture folder in your Saved Games\DCS folder, and regardless of whether you run the Open Alpha, Open Beta, or Release version of DCS, the path will always point to your Saved Games\DCS\Texture folder. Again, this saves space on your hard drive.
If you use your own Autoexec.cfg, then when prompted to overwrite you can click "no". This will create a file called autoexec.new, and you can manually make the updates as you like. Just don't modify the top line with the file date; this is used by the installer for version control. However, feel free to include it in your existing autoexec.cfg, so you don't get prompted to overwrite until there's another update to the autoexec.cfg.
If you inadvertently overwrite your autoexec.cfg, it is actually backed up as autoexec.old. Just open it and copy the appropriate information to the new file.
Updating from the 1.x series of FJ-3 Skins:
With the release of DCS World 1.5.4 and 2.0.3, the decal layer that once covered the entire model has been removed by Belsimtek. As such, organizational specific modex placement as well as modex placement on the wing is no longer possible. The modex (1xx-3xx) is now selected in the Mission Editor rather than by skin selection. For skins that have the BuNo on the tail, the last two digits of the modex are also used for the BuNo (this is not accurate, but just to allow a dynamic number on the tail).
Detail placement in textures based on USN skins by Crazyeddie.
Special thanks to SkateZilla for the awesome Photoshop template.
You are free to use any of the textures in other skins or projects as long as proper credit is provided in the readme file.
-Home Fries
7 downloads
0 comments
Updated
-
Star Scream (TF Prime)
By Piglet_7
Star Scream skin form the animated series Transformers Prime
23 downloads
0 comments
Updated
-
Mitch Janssen - HR A10
By Guest
High-res A10 "Fictional #2" Loman compatible Disclaimer: Install at your own risk - Biohaz will not be held responsible for any harm done due to use of these files
169 downloads
0 comments
Updated
-
L-39C Fictional USN Desert Aggressor
By EricJ
Based on an A-4 VA-126 scheme (loosely I might add but the colors are correct) and adapted for the L-39C airframe. To install simply copy and paste the Livery folder in DCSWorld/CoreMods/aircraft/L-39/Liveries folder, select Ukraine and in the Payload Editor select “Fictional USN Desert Aggressor” and go fly
8 downloads
0 comments
Submitted
-
Download Statistics
14,250
Files12,529
Comments26,897
Reviews