52 files
-
VMF(AW)-235 F-8E
By Corktip_14
This skin pack depicts planes of the VMF(AW)-235 "Death Angels" during their first tour of duty in Da Nang, 1966. Those where the dirtiest Crusader's ever seen, but they were also a whole bunch of brave men, who fought beyond the common sense of duty, flying very close air support for the Marines that were pinned down in Khe Sanh or Hue, by exemple.
The skinpack contains variations for 16 planes + one generic, as well as a VMF(AW)-235 pilot skin.
442 downloads
0 comments
Updated
-
F-8E USN skinpack 1
By Corktip_14
This first skinpack contains skins for the following planes:
F-8D:
- VF-154 aboard USS Coral Sea circa 1965
F-8E:
- VF-51 aboard USS Ticonderoga circa 1964 (Tonkin Gulf Incident)
- VF-162 aboard USS Oriskany circa 1966 (with some Snoopy tails)
Stay tuned, more to come!
414 downloads
0 comments
Submitted
-
F-8E Skinpack 2
By Corktip_14
This second skinpack contains 3 F-8E Navy Squadrons for MF's F-8E:
- VF-53 "Iron Angels" aboard USS Bon Homme Richard circa 1968
- VF-194 "Red Lightnings" aboard USS Ticonderoga circa 1966
- VF-211 "Fighting Checkmates" aboard USS Hancock circa 1966
Thanks again to C5 for his wonderfull template!
371 downloads
0 comments
Submitted
-
F-8E Skinpack 3 USMC
By Corktip_14
Here's the third skinpack for the MF's F-8E. I depicts the 3 missing USMC units used in the stock campaign flying the F-8E:
- VMF(AW)-212 Lancers, CVW-16, USS Oriskany, 1966. The Lancer's CO, Lt/Col Charles Ludden, became the first USMC aviator at the top of an embarqued Air Wing since WW2 when Cdr James Stockdale was shot down in 1966.
- VMF(AW)-232 Red Devils, MAG-12, Da Nang, 1966.
- VMF(AW)-235 Death Angels, MAG-12, Da Nang, 1967. The dirtiest and most elaborately decorated Crusaders ever seen in South-East Asia!
With this third skinpack, every F-8 units in the stock Rolling Thunder campaign is now covered, except VF-24, wish should be released with the F-8C.
Hop you'll enjoy!
316 downloads
0 comments
Submitted
-
VF-53 F-8E
By Corktip_14
Skinpack of VF-53 "Iron Angels" F-8E's during the 67-68 cruise aboard USS Bon Homme Richard.
305 downloads
0 comments
Updated
-
VFP-206 'Hawkeyes' TPScheme for the Mirage Factory F-8J
By Gocad
VFP-206 'Hawkeyes' TPScheme for the Mirage Factory F-8J
Consider this skin to be some sort of upgrade of the 'TPS package'.
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named 'TPS2' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
232 downloads
0 comments
Updated
-
High Res VMF(AW)-312 for TMF F-8E
By Dave
High Res VMF(AW)-312 for the Mirage Factory F-8E.
Just put into your F-8E folder and fly.
Warning "UBER HIGH RES" If you have a weak system, don't bother running it.
Enjoy.
USAFMTL
221 downloads
0 comments
Submitted
-
VF-103 Sluggers skin for Mirage Factory F-8E
By Dave
VF-103 (the "Sluggers") was activated in 1952 as an F4U Corsair squadron. VF-103 shortly transitioned to the F9F Cougar. After a few years with the Cougar, VF-103 was one of the first squadrons to transition to the F-8 Crusader. Once the transition was completed they were teamed up with VF-102 on board Forrestal. Before the introduction to supersonic Crusader jets, American carrier battle groups were often embarrassed by British bombers during allied exercises as the RAF English Electric Canberras had always been able to make mock attacks on US Carriers with impunity. The carrier-based fighters at the time simply could not put up much resistance. During the 1958 Mediterranean cruise, British pilots were shocked when VF-103 tore through their formation of Canberras before they even had a chance to start their simulated attack.
Just put into your MF F-8E folder and fly.
Thanks to C5 for the skin templates. Thanks the rest of the MF for everything else.
209 downloads
0 comments
Submitted
-
VF-211 'Fighting Checkmates' (1972) skin for the Mirage Factory F-8J
By Gocad
VF-211 'Fighting Checkmates' (1972) skin for the Mirage Factory F-8J
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named 'CM_72' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
204 downloads
0 comments
Updated
-
VMF(AW)333 'Shamrocks' skin for the Mirage Factory F-8E
By Gocad
VMF(AW)333 'Shamrocks' skin for the Mirage Factory F-8E
-------------------------------------------------------------------
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
--------------------------
Extract the contents of the rar file named 'SR_2' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
------------
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
Additional notes:
------------------
- updated version, see readme for details
192 downloads
0 comments
Updated
-
VMF-251 'Thunderbolts' skin for the Mirage Factory F-8B
By Gocad
VMF-251 'Thunderbolts' skin for the Mirage Factory F-8B
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named 'TB2' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
184 downloads
0 comments
Updated
-
VFP-63 "Fightertown" skin for the Mirage Factory F-8J
By Gocad
VFP-63 "Fightertown" skin for the Mirage Factory F-8J
-------------------------------------------------------------
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
--------------------------
Extract the contents of the rar file named 'FT_2' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
------------
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
Gocad
182 downloads
0 comments
Updated
-
VF-11 Red Rippers for Mirage Factory F-8D
By Dave
The Navy fighter squadron known as the Red Rippers were established as VF-5S in 1927 at Hampton Roads, Virginia. They flew the Curtis F6C-3 Hawk and have served in World War II, the Korean War and the Vietnam War. From 1927 to World War II, the Rippers flew several propeller aircraft including the Boeing F3B-1 and F4B-1, the Grumman FF-1 and F3F-1 and also held the following designations: VF-5S, VB-1B, VF-5 and VF-4. During World War II the Rippers were known as VF-41 and supported the allied invasion of North Africa, downing sixteen enemy aircraft in the Grumman F4F-3 Wildcat. They conducted the first air strikes against German forces in Norway in September 1943. The Red Rippers were designated VF-A when they transferred to the Pacific Theatre in 1944 on board USS Bunker Hill (CV-17) and USS Essex (CV-9). In the Pacific they flew the first air strikes against Tokyo in the Grumman F6F Hellcat.
In 1948 the Red Rippers were redesignated as VF-11. After World War II, the Red Rippers leaped into the jet age, flying the McDonnell F2H Banshee during the Korean War from the USS Kearsarge (CV-33). On 15 Feb 1959, the original Red Rippers were disestablished, but when VF-43 was redesignated as VF-11 on the following day, they decided to adopt the traditions and insignia of the Red Rippers. The "new" VF-11 Red Rippers transitioned to the Chance-Vought F-8 Crusader on USS Franklin D. Roosevelt (CV-42) where they helped quell the unrest in the Dominican Republic in 1961. In 1965 the Rippers moved to NAS Oceana flying the F-4 Phantom and saw action in North Vietnam in 1967 flying from the decks of USS Forrestal (CV-59).
Just put into your MF F-8D folder and fly.
Thanks to C5 for the skin templates. Thanks the rest of the MF for everything else.
176 downloads
0 comments
Submitted
-
VF-51 'Screaming Eagles' (1970) skin for the Mirage Factory F-8J
By Gocad
VF-51 'Screaming Eagles' (1970) skin for the Mirage Factory F-8J
-------------------------------------------------------------------------
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
--------------------------
Extract the contents of the rar file named 'SE70' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
------------
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
172 downloads
0 comments
Submitted
-
VF-24 'Checkertails' (1969) skin for the Mirage Factory F-8D
By Gocad
VF-24 'Checkertails' (1969) skin for the Mirage Factory F-8D
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named 'CT69' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
161 downloads
0 comments
Submitted
-
VF-53 'Iron Angels' (1965) skin for the Mirage Factory F-8E
By Gocad
VF-53 'Iron Angels' (1965) skin for the Mirage Factory F-8E
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named 'IA65' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
159 downloads
0 comments
Updated
-
VF-111 CVW-16 skin for the Mirage Factory F-8E
By Gocad
VF-111 CVW-16 skin for the Mirage Factory F-8E
-------------------------------------------------------------------------------------------
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template or his Sundowner skin. Thanks a lot, guys!
Installation instructions
--------------------------
Extract the contents of the rar file named '111_16' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
------------
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
158 downloads
0 comments
Updated
-
0 comments
Submitted
-
0 comments
Submitted
-
VF162CAGbird
F-8E "CAG bird" VF-162. 1966 cruise aboard USS Oriskany.
For and from the stock WOV F-8E.
141 downloads
0 comments
Submitted
-
VF-174 'Hellrazors' skin for the Mirage Factory F-8B
By Gocad
VF-174 'Hellrazors' skin for the Mirage Factory F-8B
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named 'HR2' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
137 downloads
0 comments
Updated
-
VF-13 'Night Cappers', CVW-10 skin for the Mirage Factory F-8E
By Gocad
VF-13 'Night Cappers', CVW-10 skin for the Mirage Factory F-8E
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named 'NC65' into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
136 downloads
0 comments
Submitted
-
F-8C VF-84
By Wild Cat
WildCat´s F-8C VF-84
I´ve used the VF-24 'Checkertails' (1967) skin by GOCAD to make this skin.
This skin is for Mirage Factory´s "SFP1_WOV_WOE_F_8C_Pack_V1.2.exe"
Installation
--SKIN: Copy the VF-84 folder to your "...\Objects\Aircraft\F-8C_MF" folder
--BMP files: If you want to change the _Hangar and _Loading bmp files copy them
to your F-8C_MF folder, and change the name in the "F-8C_MF.ini" file.
--Pilot: If you wish you can download my F-8C VF-84 pilot:
http://forum.combatace.com/index.php?app=downloads&showcat=313
*******************************************************************************
*** Credits ***
*******************************************************************************
Many thanks to:
GOCAD for his F-8C Skin.
134 downloads
0 comments
Submitted
-
VF-24 'Checkertails' low-vis scheme for the Mirage Factory F-8J
By Gocad
VF-24 'Checkertails' low-vis scheme for the Mirage Factory F-8J
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named '24lv into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
Additional notes
File updated, because decals.ini needed some fixing. Sorry about that.
133 downloads
0 comments
Updated
-
VF-211 'Fighting Checkmates' low-vis scheme for the Mirage Factory F-8J
By Gocad
VF-211 'Fighting Checkmates' low-vis scheme for the Mirage Factory F-8J
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
Installation instructions
Extract the contents of the rar file named '211lv into a TEMP folder.
Read the text file for further instructions.
Legal stuff
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
132 downloads
0 comments
Submitted
-
Download Statistics
14,206
Files12,485
Comments26,858
Reviews