First Eagles - WWI and Early Years - Add-On Aircraft

Hi guys
more WIPs 95% ers
i got a couple of av cii skins and a abl CII & a rumpler on the av airframe
u will see from the screenie wot i mean
 
2 updates 2day but the first is because i put the wrong decal.ini in the rumpler
& the second is because i forgot 2 add something 2 the readme :blush2:
 
 
hope u like um
gambit168

.max file only

Alternative FM for the default SE5a
07/30/07 by ShrikeHawk
 
I love flying the SE5a in a dogfight. So nimble and quick!
But...in slow-speed maneuvers and actions that require good
rudder control (i.e., landing, strafing) the plane is waaaayy
too squirrely. After rudder input the plane oscillates terribly
and it's very hard to keep the gunsight on target. Also, on
landing, the slideslip is extreme! The plane does not sink to
the ground as it should even when the engine is a 0%. At least
this is my experience.
 
So after endless tinkering, I finally have the SE5a flying the
way I expect it to. Now the plane lands much as the other
aircraft do. The landing requires more area but it is reasonable
now. It still responds a lot to yaw input, although moderately,
but will not oscillate at all after counter rudder input.
You can actually hold the gunsight on target with minimal effort.
 
This mod addresses other concerns than what peter01 is doing with
his alternative FMs. But when he posts it, I would highly
recommend using his FM. If you want to use this mod "and" peter01's
at the same time, please PM me and I will post a combination.
 
p.s. Thanks to Peter01 for the tip about the cnb parameter. That was
the last bit of info I was looking for.

These FMs were developed prior to the Expansion Pack. They won't work well, some won't work at all, with the Expansion pack.
 
UPDATE and additions.
 
Flight Models for some of the A-Teams 3D Models, Aladars Dh2, Laton's fokkerD8 and most of Thirdwires planes. This will be the last change, until some time after TKs upcoming addon.
 
This is an update to the previous download, with the addition of 5 2-seaters, PfalzD12, Fokker D8. But there have been quite a few changes to previous versions - see forum topic "What do you think?"
 
Includes 26 FMs - Sopwith Pup, Sopwith Triplane, Fe2B, F2B Brisfit, AlbatrosD3, Dh2, Sopwith Camel, Sopwith Dolphin, Sopwith Snipe, SpadVII, PfalzD3, ShuckertD3, FokkerDr1, PfalzD8,PfalzD12, FokkerD7, FokkerD7F, AlbatrosD5a, Se5a, Spad13, AviatikC2, BE-2D, Bregeut14,DFWC5,RolandC2/Walfisch, FokkerD8.
 
The FMs should be considered beta. They are optimised for Hard Flight Model. The AI is excellent.
 
Contact me on the CombatAce forum not the A-Team or Charles, Laton, Aladar or even TK if there are any issues. And many thanks to these for allowing me to do alternative versions.
 
Please read the readme file for fuller credits and installation instructions, but its as simple as one drag and drop!

Nieuport 27 C.1 - Several variations
for First Eagles EP1
October 2007
 
N27 - 1x Vickers, 1x Lewis
N27_FAS - 1x Vickers
N27_RFC - 1x Lewis
N27_Dual - 2x Lewis
 
Models by EmlD
FMs by Peter01
Thanx Alligator Devil for new cockpit look
 
 
Just extract the main folder to the Objects\Aircraft,
or place each plane folder individually into the aircraft
folder after extracting the contents of the zip file.
 
Have fun!

This is just a mod of the original Nieuport 11 to represent:
N16 C.1
N16 130hp
thanks to :
 
MontyCZ and Texmurphy for the original Nieuport 11
 
Peter01 for his help on IA
 
instalation:
 
just drop the plane in the aircraft folder
 
Any questions or comments
Combatace handle christian59
 
hope you will have good time with this fighter
 
work with patch game

November-December 2007
 
 
Hanriot HD1 CAM (Italy) (Vickers MG on the leftside)
 
 
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
 
 
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

Little mod of the Spad VII to turn it into a Spad XII (apologies and acknowledgement to Gr.Viper who went before me)
 
Model changes: removal of the nose humps and reskin
XXX_data.ini changes: tweaked flight model reflecting the much heavier weight, more powerful engine (220hp nominal), wing stagger, better aerodynamics, and more wing area
New weapon (37mm S.A.M.C.) New (it’s a mod of stock) reloading sound for the canon (its slow), New firing effect for the canon (cockpit smoke)
New hanger and loading screens
 
The canon is on the secondary fire button and takes 12 sec to reload (new sound more or less reflects this)
It has 12 reloads
I have seen the A.I get infrequent hits with this setup (I’m pretty infrequent too)
---------------------------------------------------
A few “Facts”
 
The Spad XII was a beefed up version of the Spad VII with a new engine (Hispano-Suiza 8Cb 220hp) and a slightly more refined fuselage, more wing area and the most obvious difference, slight wing stagger (something we can’t do with the stock model)
It had a 37mm S.A.M.C. semi-automatic canon with twelve reloads mounted to fire through the prop hub and with the breech situated between the pilot’s legs
Because of the breech placement the controls were of the Deperdussin type (wheel)
 
After initial enthusiasm for the aircraft by the French ace Georges Guynemer, the Aéronautique Militaire placed an order for 1000 airframes,
However the Spad XII proved very difficult to fly with its unfamiliar controls, the new weapon filled the cockpit with smoke on firing and was difficult to aim and reload, and to cap it off, the new Hispano-Suiza proved to be unreliable
Its doubtful that more than twenty aircraft were completed and these were issued singly to individual Aces of the Aéronautique Militaire, There were never more than 6-8 on the front at any one time and they were widely spread throughout the Escadrille’s
---------------------------------------------------
Top speed 220kph at SL
Ceiling 7000m
Empty weight 628kg
---------------------------------------------------
Files
New Reloading sound: gun_reloadlg.wav goes in the Sounds folder
The SOUNDLIST.INI must be modified to add the sound (this must be extracted to the flight folder if you haven’t already) see below
 
New gunfire effect: 37mmSpad.ini must be placed in the effects folder
 
New cannon must be added to the bottom of your GUNDATA.INI (this must be extracted to the Objects folder if you haven’t already) see below, and then the GUNDATA.INI must be opened and saved with the gun editor
 
New aircraft folder SPAD_XII placed in the Objects/aircraft folder
This contains 4 skins (the French aces, Nungesser of Esc65, Madon of 38ESC, Fonck of Esc103 and Guynemer of Esc3),
the Ini’s necessary for the craft,
a hanger screen and two version of the loading screen: wide(default) and normal (you must rename it to use it)
 
 
---------------------------------------------------
SOUNDLIST.INI
Add near the top of the file:
---------------------------------------------------
SoundFile0XX=gun_reloadlg /////////////////////XX is the next number in the sequence above
---------------------------------------------------
And at the bottom add:
---------------------------------------------------
[gun_reloadlg]
Priority=HIGH
3DSound=FALSE
NumBuffers=1
Looped=FALSE
---------------------------------------------------
 
 
GUNDATA.INI
Add at the bottom of the file
---------------------------------------------------
[GunData0XX] //////////////////////////////////XX is the next sequential number
TypeName=37MM_SAMC
FullName=37mm SAMC Moteur canon
Caliber=37.000000
ROF=1.000000
MuzzleVel=400.000000
AmmoWt=0.650000
WarheadWt=0.035000
Reliability=97.000000
Accuracy=70.000000
AddLight=TRUE
MaxLightRange=1000.000000
FireColor=0.150000,0.100000,0.100000
GunFireEffect=37mmFireEffectEnH
GunFireSound=TankGun
EffectClassName=37mmEffects
EffectTime=10.000000
TracerTexture=Tracer.tga
TracerSize=0.150000
TracerDistFactor=0.002000
TracerLength=0.015000
MaxVisibleDist=4000.000000
MaxStreakVisibleDist=1000.000000
TimeFuzed=FALSE
---------------------------------------------------
Important: the GUNDATA.INI must be saved in the gun editor after manual editing
 
Have fun :yes:
V

Fokker E.IV and E.IVa
 
Model by Laton
Skins (E.III) by v. Deutschmark
FM by peter01.
 
The zip file contains two variants, with alternate armament (2 and 3 gun) configurations.
 
Release pack also includes original bmp templates for anyone who wishes to make and distribute their own skins.
 
Check the Readme for installation instructions and any other notes.

UPDATE: 3rd September
 
There's a bit of a mix, some AI only changes, some minor changes, mostly major FM changes.
 
N11, N16, N17, N17bis, Halberstadt D3, Fokker D2. AI changes only.
 
Pfalz EV, Fokkers EIV/EVa. Changed, more difficult to fly and roll reduced.
 
Dh2. Minor changes to stalls.
 
FokkerD7. Minor change, roll reduced and more stable.
 
Pup, Tripe, F2b, Dolphin, Se5a, Snipe, N28, Spad13, FokkerDr1, PfalzD3. Major changes.
 
Some things worth pointing out:
 
Dolphin. 4 and 2 Gun versions, 2 Gun version thanks to p10ppy, but otherwise same FM. The default is the 2 gun one. There are backups of each version in the folder hopefully clearly named so you can delete default and copy another to pick and choose.
 
F2b. Overwing Lewis and Without Lewis versions from Mike Dora's idea, and in folder with backups of each, same FM. Default is Without Overhead Lewis. The gun is removed, but the mount for the Lewis is still in place on this model, as I found some graphical glitches when that was removed.
 
Fokker Dr1. Two FMs, TKs with AI changes and mine. Default is mine... its your choice.
 
 
===========================================================================
 
These are ONLY for the Unpatched Expansion Pack version - October 2007. They will not work well at all with the April 2008 patch nor will they work mixed with stock FMs.
 
The FMs are written for Hard FM mode. They will not work well, or as designed, in Normal or Easy Mode (Flight Models are completely different and inconsistent).
 
There is a comprehensive Readme, and includes the following sections:
 
1) Introduction
2) The FMs
3) Additional Changes to FMs
4) Extras
5) AI Difficulty Setting
6) The Campaigns
7) Installation
8) Acknowledgements & Caveats
 
Installation is simple, but should be done on a clean install of original FE (no patch), then Oct 2007 EP (no patch). You do need to get all the add-on aircraft models installed first.
 
80 FMs included, and many thanks to all the modellers for allowing me to do these. All are needed for campaigns.
 
Bortdafarm - Pfalz B1, Fokker B1, Fokker B2, Fokker D2, Fokker D3, Martinsyde G100, Martinsyde S1, Avro 504D.
 
Monty CZ - Nieuport 11, Nieuport 16, Nieuport 17
 
EmID - Nieuports 24 (2), Nieuports 27 (4), Nieuport 28, Hanriots (3)
 
Laton - Fokker E1, Fokker E1a, Fokker E3, Fokker E3a, Fokker E4, Fokker E4a, Pfalz E1, Pfalz E3, Pfalz E4, Morane H, Morane L, Morane LAO, Fokker D8, Bristol M1c
 
Thirdwire - Albatros D3, Albatros D3OAW, Albatros D5, Albatros D5a, FokkerDr1, Fokker D7, Fokker D7F, DFW C5, Camels (3), Spad 7s (2), Spad 13, Se5a, Salmson, Re8
 
p10ppy - Morane N, Spad 12
 
A-Team - Be2c, Be2d, Fe2b, Fe8, Dh2, Pup, Triplane, Dolphin, Snipe, Breuget 14, F2B, Halberstadt D3, Walfisch, Aviatik C2, Pfalz D3, Pfalz D8, Pfalz D12, Schuckert D3, Junkers D1.
 
In addition, some planes that use another 3-D Model: N17bis, N23, Fe2c, AlbatrosD3_160, AlbatrosD3OEF_200, AlbatrosD2, DFWC1. These are needed for campaigns also. See Installation instructions.
 
FMs are mainly by me, but Spad12 FM is by P10ppy, and Camels, Fokker Dr1, Spad 7s are by Thirdwire. The RE8 is largely Thirdwires with some changes to improve takeoff and turning. All have AI changes to fit with other FMs.
 
Have fun!
 
Peter July 2008

UPDATE: 3rd September
 
Se5a, Spad13, FokkerDr1 FMs changed.
 
For the Fokker Dr1, there are two alternative FMs, TKs with AI changes and mine. Default is mine... its your choice. There are backups of each version in the folder hopefully clearly named so you can delete default and copy another to pick and choose.
 
=======================================================================
 
This pack only updates the stock plane FMs. Its meant to be a very QUICK START to a modded game. It does change the game considerably, and also includes Le Prieur Rockets and AI only planes made flyable.
 
If you like this, and want to then add other aircraft and FMs that work properly with the Expansion Pack Oct 2007 version then download the "FULL SET FMs and Campaigns for Oct 2007 Version EP ONLY", and add plane packages and FMs, manually and individually.
 
The FMs are done for Hard FM Mode. They will not work well, or as designed at all in Normal or Easy Mode (Flight Models are completely different and inconsistent).Actually, they are designed for hard everything, including Hard Enemy Skill Level in the Gameplay Options. However, if you find the AI too hard or too easy, see 5) AI Difficulty Setting.
 
IMPORTANT: These are ONLY for the Unpatched Expansion Pack - October 2007. They will not work well at all with the April 2008 patch nor will they work mixed with stock FMs.
 
Installation is very simple and quick, maybe 10 mins for everything.
 
1) Do a clean install of the the original FE (no need to apply patches), then install the paid for Oct 2007 Expansion Pack. DO NOT install any EP patches at all.
 
2) Extract this zip file to a temp folder, and move or copy all the folders of the extracted zip to your newly installed main First Eagles directory, and when prompted, click yes to overwrite existing files.
 
3) Go into the game, set all options to Hard (its designed for Hard), and...fly.
 
Thats it!!!
 
There is a comprehensive readme (there are many changes to the stock game), and consists of the following sections:
 
1) Introduction
2) The FMs
3) Additional Changes to FMs
4) Extras
5) AI Difficulty Setting
6) The Campaigns
7) Installation
8) Acknowledgements & Caveats
 
Please note that the included campaigns will not work until you download all the add-on planes. Standard campaigns will work of course.
 
Have fun.
 
Peter01 July 2008

The "QUICK START FMs and Campaigns for Oct 2007 Version EP ONLY" and "FULL SET FMs and Campaigns for Oct 2007 Version EP ONLY" have also been updated.
 
There's a bit of a mix, some AI only changes, some minor changes, mostly major FM changes.
 
N11, N16, N17, N17bis, Halberstadt D3, Fokker D2. AI changes only.
 
Pfalz EV, Fokkers EIV/EVa. Changed, more difficult to fly and roll reduced.
 
Dh2. Minor changes to stalls.
 
FokkerD7. Minor change, roll reduced and more stable.
 
Pup, Tripe, F2b, Dolphin, Se5a, Snipe, N28, Spad13, FokkerDr1, PfalzD3. Major changes.
 
Some things worth pointing out:
 
Dolphin. 4 and 2 Gun versions, 2 Gun version thanks to p10ppy, but otherwise same FM. The default is the 2 gun one. There are backups of each version in the folder hopefully clearly named so you can delete default and copy another to pick and choose.
 
F2b. Overwing Lewis and Without Lewis versions from Mike Dora's idea, and in folder with backups of each, same FM. Default is Without Overhead Lewis. The gun is removed, but the mount for the Lewis is still in place on this model, as I found some graphical glitches when that was removed.
 
Fokker Dr1. Two FMs, TKs with AI changes and mine. Default is mine... its your choice.

Russia was the only country that used the French designed Farman F.30. While no other allies adopted it, the F.30 was the primary plane of the Imperial Russian Air Service and the Russians built about 400 of them at the Dux factory near Moscow beginning in 1915. It was used throughout WWI and was used by both sides during the Russian Civil Wars.
 
The Farman F.30 was powered my a Salmson 150hp water-cooled engine, had a single machine gun for the observer, and was said to be able to maneuver as well as the Eindeckers it faced. It was a general purpose plane, used originally as a fighter, and later for recon, artillery spotting, and light bomber missions.
 
My plane includes a loadout for a light bomb load. Decals and my skinning templates are included in the download.
 
I have included ojcar's "DummyMachineGun" data, Peter01's Lewis Machine Gun data in the download.
 
Warning
The Farman F.30 has a wider wingspan than First Eagles expects so you should install my "Airfields for Large Planes" available in the Combat Ace downloads area. Otherwise, when starting on the runway, your wings may be touching the wings of the planes next to you. This will cause an immediate collision and you or other planes in your flight may lose their wingtips as soon as the game starts.
 
Credits
Thanks to Ojcar for making the data file for the Farman F.30 and for making the data for the dummy machine gun.
 
Thanks also to Peter01 who made the data for the Lewis Gun.
 
Thanks also to Crowford who provided resources for the Farman cockpits.
 

Installation Instructions
For FE1 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder.
 
For FE2 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "FarmanF30". Move the folder named "D" from your Aircraft/FarmanF30 folder into the Decals/FarmanF30 folder you just made.
 

You may not need to install the guns, they have been used on other planes and you may already have them. Instructions for installing the guns, if you should need them, are in a separate file included in this download.

Hansa-Phonix KD1 "Star-Strutter" Ver.1 05 April 2009
 
Model, Skin & FM by by Andre (Laton) Simpson
 
This aircraft represents the late version Star-Strutters made under licence by Phonix. They had better pilot seating, a larger rudder/tail assembly and more powerful engine than the original Hansa-Brandenberg variant (which will my next release.)
 
Please check the read-me for installation instructions.
 
 
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes

Hansa-Brandenberg D1 "Star-Strutter" Ver.1 08 April 2009
 
Model & Skin by Andre (Laton) Simpson
 
FM by peter01
 
 
Please check the read-me for installation instructions.
 
 
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes

Ansaldo S.V.A.5 Ver 1.1 30 April 2009
 
Model, Skin & FM by by Andre (Laton) Simpson
 
 
Please check the read-me for installation instructions.
 
 
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes
 
 
**1.1 - Mesh fix and changed FM

Hannover CL.II & CL.III Ver 1 26 May 2009
 
Model & Skin by Andre (Laton) Simpson
 
Gunner mesh & Skin provided by Geezer
 
FM by Peter01
 
 
Check readme for installation instructions.

updated to fix nationality and gun ammo and use Peter)1s newest flight model.Otherwise the same as the original.

Halberstadt CL.IV Ver 1 1 July 2009
 
Original Model: Geezer
First Eagles Conversion, Damage meshes & Skin: Andre (Laton) Simpson
FM: Peter01
Gunner mesh & Skin provided by Geezer
 
 
***Spandau/Parabellum machine gun and Propeller based on the source file from Wings of War by Silver Wish Games/Illusion Software provided by Radek Navratil.
 
 
 
Template pack included for skinners.
 
See readme for installation instructions.

The Sopwith 1 ½ Strutter is a teameffort. Dagaith began the project early in 2009 and I joined to helpwith research and skins. Unfortunately, his commitment to quality,and the pressure of time, made it impossible for Dagaith to finishthe 3d model before he was drafted into the army (Estonia) in June. Icontinued work on the cockpit and skins, but I was unable to make thefinal adjustments and generate the LOD files necessary for game play.[Dagaith used a later version of 3dMax that would not render in theversion I have.] Fortunately Laton completed the LODsand made it possible to get the Strutter ready for game play. Theflight model was done by Peter01, the gunner by P10ppy. The finalcockpit and skin sets are my efforts. Southside Bucky did Betatesting and offered valuable advice to tune up the model and skinsfor release.
 
Skins in highdefinition (2048 x 2948) and standard definition ((512 x 512) will bereleased along with the model. A hidef set for B Flight 43 Squadron RFC is enclosed as the default.Additional skins are available in the download section. The2048 and 512 skin sets are NOT interchangeable. You may reduce the hidef set down to 1024, but if you do, keep the associated decal sets.Because some detail could only be sustained by decals in the standarddef sets, these are different from the hi def sets.
 
There is an sound file with the 130 HP Clerget for your sound folder.
 
The Strutter was the first British aircraft with a synchronized Vickers gun. There were several versions. The first a two seat observation type, wasknown to the RNAS and the RFC as the 9400 series, and later to theFrench as the 1A2. The 9400 is the version modeled here. A later single seat version, adapted for bombing, called the 9700 series was first produced for the UK. The French not only built both versions, but made about twice as many (4500) as the British. The first French bomber versions were identified as 1B2 (with a crew of 2). The later French versions, similar to the 9700, were called 1B1 (a crew of just one). The 1B2 version will be released for First Eagles after this model. The 1B1/9700 type may come later. There was another variant, a single seat interceptor, used for Home Defense of the London area.,which was fitted with one or two Lewis guns and a cockpit aft of the wings, where the gunner was originally placed. All versions had air brakes on the inboard lower wings which are not operational on the model, and were often not favored by the aircrews because they created “mushy” handling.
 
A substantial set of skins will be released in conjunction with this model. Please refrain from posting additional skins until all of the original skins are posted.
Standard res 512 RFC and RNAS; Belgian 9400 series, French 1A2 and 1B2 all in the pipeline. They will be up ASAP.
 
Thanks for your patience.
 
 
sinbad

Ahh, the last "Fixed" FE2 game file download didn't actually fix the loadout guns, it actually didn't work at all - so here's a fix that does.
 
Just noticed that FE2 creates a directory for GUNS and without that included the new guns (that don't jam) don't work! That directory is now included.
 
March 16th
 
************************************************************************************************************************************
 
An update, mainly to fix gun jams on gunpod/loadout guns in FE2. Jams didn't happen much to me before, but do now for some planes. I *think* Thirdwire may have implemented this in a more complex manner than I first assumed, perhaps jams for loadout guns depend on rated mach limits for individual planes.
 
Please install both gundata files and the entire "Weapons" folder in your "Objects" folder, as per the zip directory structure. This will give the loadout/gunpod guns 99% reliability - they will jam, but very rarely.
 
Sorry about that, and as a bonus here are fours FMs solely for FE2. You will have a problem if you install in FE1!
 
Se5a with gunsight. If you do not like, just delete the SE5A_LOADOUT file in the Se5a folder. It will revert back to the normal file that comes with the game with no added gunsight. I couldn't remove the second gunsight that comes with the model, it appears to be part of another graphic.
 
MSLOL - Morane Two Seater with wing mounted Lewis - this one now comes with a gunsight too.
 
Fokker DR1. Special FM for FE2, this one feels better in FE2.
 
Nieuport16LateV. Similar to previous but this includes several more loadouts that were not possible in FE1 (last upload was for both games), including Dual Lewis on wings.
 
Thanks to P10ppy for supplying the gunsights, as well as describing how to implement them.
 
Peter01 March 2010.

FMs for either FE1 or FE2.
 
I knew I had these somewhere, and found them on a backup drive. They were done last December. Just refined, tweaked and tested them a bit, and ... they are ready to fly.
 
New FMs for the Bristol M1C, Fe8, Fokker D8, Schuckert D3.
 
The Bristol M1C is very nice, has a new gun, and is equal in capability to my Albatros D3.
 
The FE8 has a couple of issues - on takeoff, stalls - but still nice, and in capability about the equal to my Halberstadt D3.
 
The Fokker D8 is the nicest FM I have done for this plane, it is very capable, about the equal to my Camels. Snipes vs Fokker D8s are fun.
 
The Schuckert D3 is a little less capable than the Fokker D8.
 
 
IMPORTANT
=========
 
For FE1 you must have installed the FE1 game files from "108 FE1 and/or FE2 FMs March 2010" in the Flight Models download section here. 108 FE1 and/or FE2 FMs March 2010
 
For FE2 you must have installed the FE2 game files "REALLY FIXED FE2 Game Files and 4 FE2 FMs 2010" in the Flight Models download section here. REALLY FIXED FE2 Game Files and 4 FE2 FMs 2010
 
 
INSTALLATION
============
 
1) I recommend you backup the folders of the above aircraft before installing.
 
2) Place all the files from this download into the corresponding aircraft directories.
 
Have fun.
 
Peter01
 
March 2010

--------------------------------------------------------------------------------------------------------------
Nieuport N 17/23 Familly for ThirdWires First Eagles The Great Air War 1918
_______________________________________________________________
 
File version 2.0 release date 15.11.2010
 
This package contains flyable 5 Nieuport 17 and 3 Nieuport 23 plane with cockpit
 
about authors:
Flight model peter01, member of CombatAce.com
3D Model and textures Monty CZ, member of CombatAce.com
any sugestions can be posted at combatace forum.
any changes of this file must be authorized by authors
contact us at combatace.
 
thanks to :
 
MontyCZ and Texmurphy for the original Nieuport 17
 
Whiteknight06604 for the N17 with uper gun
 
Aligator devil for is cockpit works and upgrade and hangar
 
peter01 for is flight model
 
 
please direct any questions about this mod to me at the below places.
 
 
instalation:
 
just drop in the C:\Users\username\Saved Games\ThirdWire\FirstEagles2
 
 
 
Technical data of the real plane:
 
Nieuport 17
 
Type single-seated fighter
Power plant one air-cooled Le Rhone 9J (9-cylinder radial engine)
with 110 HP (80.9 kW) alternatively
a Le-Clerget engine with 130 PS (95.6 kW)
Year of construction 1916
 
Perfomance
 
Maximum speed 177 km/h from ground proximity to an altitude of 2,000 m
Rate of climb climbs to 2,000 m altitude in 5.30 min
Ceiling 5,300 m
Operational range 250 km
Endurance 2 hrs
 
Weight
 
Empty weight 374 kg
Take-off weight 565 kg
 
Dimensions
 
Length 5.77 m
Height 2.44 m
Wing area 14,75 qm
Span 8.17 m
Crew 1 person
 
Useful load/armament
one or two Lewis machine guns or one Vickers
machine gun. Fixedly mounted on the fuselage and
firing in synchronization through the propeller arc.

here are
SE5 with 150 Hp Hispano-Suiza
SE5a early
SE5a
SE5a VIPER
 
from peter01's FM

This is the last machine that Bort' built for 1st eagles that I'm aware of.
The S1 wasn't in the original upload because it hadn't been done untill
later, by which time the both of us had pretty much left the scene.
As Bortdafarms web page is long gone, I'm adding the S1 to the collection here at CombatACE.
 
Disclaimer: This zip file(MartinsydeS1.zip) is the sole work and property of Bortdafarm.
 
Uploaded by Bwf.