First Eagles - WWI and Early Years - Add-On Aircraft

EDITED AND REPAINTED STOCK ALBATROS DVA TO REPRESENT AN EARLY WAR ALBATROS DI
(FOR FIRST EAGLES)
with reduced performance to match the period...
 
for use with early war aircraft etc
 
install to the objects/aircraft folder
if for example you fly the DH2 and select 1916 as the year in the mission screen..
then only aircraft of that era will be loaded into the mission
so this aircraft allows you to fly in the correct period and have some slightly more appropiate targets/enemys
 
bortdafarm
 
(is player flyable allso)

This is a mod of the original Nieuport 11 to present:
 
Nieuport 16 C.1 110hp
Nieuport 16 C.1 130hp
Nieuport 16 RFC
Nieuport 16 C.1 Dual Lewis
Nieuport 16 C.1 Lewis Late
Nieuport 16 C.1 Vickers Late
 
thanks to :
 
MontyCZ and Texmurphy for the original Nieuport 11
Whiteknight06604 for the N17 with uper gun
peter01 for is flight model
 
instalation:
Recommend you back up your install first.
just drop in your main First Eagles directory
You will be prompted whether to overwrite files, confirm to overwrite
 
Any questions or comments
Combatace handle christian59
 
hope you will have good time with this fighter
 
 

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
------------------------------------------------------------------------------------------------
 
to Fly the Oef Albatros DII as Austro-Hungarian
with hungarian pilot names etc
 
place the
 
TextureSet.ini
into the OefAlbatrosDII/OefAlbDIIBrown1 folder
 
the OefAlbatrosDII.ini and the OefAlbatrosDII_DATA.ini
into the main OefAlbatrosDII folder
 
and the NATIONS.ini into the main game Flight folder
 
what ive briefly done is this
 
[Nation005]
Name=AUSTRIA
DisplayName=Austro-Hungarian Air Service
Alignment=ENEMY
PilotNameList=NamesHungarian.lst
RankList=RanksGAS.lst
CallsignList=
Formation.Fighter=Fighter
Formation.Attack=Fighter
Formation.Bomber=Bomber
Formation.Transport=Bomber
Formation.Tank=TankSpread
Formation.MobileAD=AD
PilotTrainingStandard=POOR
GenderRatio=0
DebriefSuccessMusic=DebriefSuccess.wav
DebriefFailMusic=DebriefFail.wav
DebriefKilledMusic=DebriefKilled.wav
SpeechFile=
SpeechTextFile=
Medals=MedalsGAS.ini
MedalTextFile=MedalsWWI.str
 
edited the pilot names for AUSTRIA to use the stock Hungarian pilot name list
 
and added medal awards (tho only the stock german medlas sorry bwt that)
 
perhaps some one could make a new medal set up and rank set up allso to do the job properly
but for now it's something
 
 
Bortdafarm

This is the final update of the Martinsyde G.100, thanks to Stephen1918 who tweaked the files. The bomb racks now only show when the plane is carrying bombs, the prop spins, sample decals have been added for anyone who wants to make his own markings, and revised installation instructions have been added - all due to Stephen1918's efforts. Thanks, Steve.
 
I mistakenly attached the files for the G.102 to this upload - when released by CA, it will now have the correct G.100 files.

The Martinsyde G.102 was a G.100 aircraft with a more powerful 160 hp Beardmore engine, which gave it slightly better performance. Again I could not have produced this upload without the patient help from Stephen1918, ocjar, gterl, and Wrench. Thanks, guys.

The Voisin III was developed in 1914 and used throughout the war. It was produced in large numbers and was used by all the Entente powers. Although it was originally used as a fighter, reconnaissance, and ground attack plane, it was most commonly used as a bomber later in the war.
 
My version is the Voisin LAS with a full chord lower wing, a 9 cylinder water-cooled Salmson engine, and an 8mm Hotchkiss magine gun mounted on a tripod over the pilot.
 
Ojcar has created two data.ini's for the Voisin LAS, one for the 120hp engine, and one for the 150hp engine. For your convenience, I have created a completely separate plane for each. The models, decals and skins are the same, but the data.ini's and loadouts are different, with lighter bomb loads for the 120hp plane.
 
I have included three skinning options for each plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included my skinning templates.
 
I have also included decals for serial numbers which will be applied randomly.
 
There doesn't seem to be any standard way for the Voisin to carry its bombs, so I have included several loadouts with different sized bombs carried in different positions, with appropriate weights for each plane. (The loadout names are based on the size of the bombs, not the total loadout weight.)
 
 
Historical Notes:
The serial numbers are fictious, but in the correct range for the Voisin LAS.
 
The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.
 
 
Credits:
My thanks once again to Ojcar for making two excellent data.ini files for this plane.
Thanks also to Sinbad, 33Lima, and Dreamk who provided reference materials for the Voisin LAS.
 
 
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
 
 
Installation instructions:
For FE1: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder.
 
For FE2: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create two new folders named "Voisin3_120" and "Voisin3_150". Move the folder named "D" from the Airplanes/Voisin3_xxx folders into the corresponding Decals/Voisin3_xxx folders you just made.
 
To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
ALBATROS DII For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;;;
fm- player version (hard)
 
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE
 
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
AVRO 504D For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...
 
notes;;;
fm- player version (hard)
slot car flyers need not apply!
 
 
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

Ahh, the last "Fixed" FE2 game file download didn't actually fix the loadout guns, it actually didn't work at all - so here's a fix that does.
 
Just noticed that FE2 creates a directory for GUNS and without that included the new guns (that don't jam) don't work! That directory is now included.
 
March 16th
 
************************************************************************************************************************************
 
An update, mainly to fix gun jams on gunpod/loadout guns in FE2. Jams didn't happen much to me before, but do now for some planes. I *think* Thirdwire may have implemented this in a more complex manner than I first assumed, perhaps jams for loadout guns depend on rated mach limits for individual planes.
 
Please install both gundata files and the entire "Weapons" folder in your "Objects" folder, as per the zip directory structure. This will give the loadout/gunpod guns 99% reliability - they will jam, but very rarely.
 
Sorry about that, and as a bonus here are fours FMs solely for FE2. You will have a problem if you install in FE1!
 
Se5a with gunsight. If you do not like, just delete the SE5A_LOADOUT file in the Se5a folder. It will revert back to the normal file that comes with the game with no added gunsight. I couldn't remove the second gunsight that comes with the model, it appears to be part of another graphic.
 
MSLOL - Morane Two Seater with wing mounted Lewis - this one now comes with a gunsight too.
 
Fokker DR1. Special FM for FE2, this one feels better in FE2.
 
Nieuport16LateV. Similar to previous but this includes several more loadouts that were not possible in FE1 (last upload was for both games), including Dual Lewis on wings.
 
Thanks to P10ppy for supplying the gunsights, as well as describing how to implement them.
 
Peter01 March 2010.

Although best known in its role as a bomber, the Airco DH4 was intended to be a general purpose airplane and was used for recon and ground support as well. Early versions were powered by a 250hp Eagle engine. Later versions were powered with a 375hp Eagle engine, which made them very effective bombers. The biggest problem with the DH4 was the gas tank placed between the pilot and gunner, which made communication between the two almost impossible.
 
I have uploaded two versions of the DH4 - Ojcar has created two FMs for the plane, one with the early 250hp engine, and one with the later 375hp engine.
 
Both planes have two skins, a brown and an olive color. Both use the letter decals that come with First Eagles (which you can set in the loadout screen) and a set of serial numbers which will be applied randomly. There are also loadouts for light, medium, and heavy bomb loads. The skins, decals, and loadouts are interchangeable for the two planes.
 
The skins are rather generic, I have included my skinning templates for those who wish to make better skins.
 
 
Credits
My thanks to Ojcar for once again making two excellent data files for the DH4.
My thanks also to Sinbad for providing a great deal of resource information for this plane.
 
 
Installation Instructions
The two versions can be installed separately or both together.
 
For FE1 - Unzip the file and move the folders named "AircoDH4_250" and "AircoDH4_375" into the FirstEagles/Objects/Airplanes folder.
 
For FE2 - Unzip the file and move the folders named "AircoDH4_250" and "AircoDH4_375" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create new folders named "AircoDH4_250" and "AircoDH4_375". Move the folders named "D" from the Airplanes/AircoDH4 folders into the corresponding Decals/AircoDH4 folder you just made.

The Roland D.II was a German fighter introduced in early 1917. It featured an unusual fuselage, with the upper wings attached to a pylon in front of the pilot. Although the plane had a strong structure and performed reasonably well, the poor forward view limited its effectiveness as a fighter. On the Western Front, it was soon replaced by other planes, but continued in service on the Eastern and Macedonian Fronts until the end of the war.
 
I have included two skins, a green and lilac camo, and a green and brown camo. I have also included a full set of number decals. My skinning templates are included in the download.
 
Credits
Thanks to Ojcar for making the data file for the Roland D.II.
Thanks also to Nix, who made the sound file for the Mercedes 160hp engine.
Thanks also to Crowford who offered many suggestions and beta-tested version 3.
 
Installation Instructions
Note - The engine sound file has been used in several other planes. If you already have a file with the same name in your Sounds folder, then you don't need to install mine.
 
For FE1 - Unzip the file and move the folder named "RolandD2" into your FirstEagles/Objects/Aircraft folder. If you don't already have it, you will also need to move the sound file "mercedes160m2.wav" into the FirstEagles/Sounds folder.
 
For FE2 - Unzip the file and move the folder named "RolandD2" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "RolandD2". Move the folder named "D" from the Aircraft/RolandD2 folder into the Decals/RolandD2 folder you just made. If you don't already have it, you will also need to move the sound file "mercedes160m2.wav" into the FirstEagles/Sounds folder.

AI FLYABLE RIGID AIRSHIPS:
Well, a quick and dirty work to make AI flyable two of the excellent Stephen1918 airships.
-The real L32 Zeppelin was shot down in 1916 over Horns Reef by the cruisers Galetea and Phaeton while trying to raid England. Before this it made 77 recon missions over North Sea.
The model we have is intended to have a generic German rigid Airship to use in campaign mode (you should create units with one plane and only one pilot).
-The real R23 class was never used in combat, but two of the improved R23X were built in 1918, and in fact one of them, the R29 attacked the UB-115 U-boat (it also was attacked by some ships. The submarine was sunk, and this was the only recoorded success of a British rigid airship.
Both airships are hard to destroy with machine guns, but the AI fighters will try to pass through the Airship sometimes (a game engine limit). Bad idea! The fighter will be destroyed (and the pilot probably will had the VC or Legion d'honneur) and the Airship badly damaged.
To install them you should put the AirshipR23 and ZeppelinL32 folders into your Aircraft folder.
Enjoy it!
Both models and skins by Stephen1918
All FMs, Loadouts and .ini stuff by Ojcar
Special thanks to Peter01 and Hitchingbroke!

Ansaldo S.V.A.5 Ver 1.1 30 April 2009
 
Model, Skin & FM by by Andre (Laton) Simpson
 
 
Please check the read-me for installation instructions.
 
 
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes
 
 
**1.1 - Mesh fix and changed FM

The much maligned SPAD A.2 was not nearly as dangerous as some people believe. It was actually a good idea in the days before the synchronized gun was perfected, and continued to be used on the Eastern Front throughout the war. The A.2 was SPAD's first fighter and was introduced in mid 1915.
 
My version is the Russian version which was built at the Dux factory in Moscow. The upper wing has a center panel above the fuselage, and the gunner is equipped with a Colt-Browning 30 caliber machine gun.
 
I have included four skinning options, identical except for the decals. There are skins for 3 Russian variations, and a skin for the French. I have included my templates and serial numbers for some of the skins, which will be applied randomly.
 
Historical Notes:
The serial numbers are fictitious.
 
Credits:
My thanks once again to Ojcar for making the excellent data.INI file for this plane.
My thanks to Nix for providing the engine sound for the LeRhone engine
Thanks also to Sinbad and Whiteknight06604 who provided resources for the SPAD A.2 and for the Colt-Browning machine gun.
 
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
 
 
Installation instructions:
For FE1: Unzip the file and move the folder named "SPADA2" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "rhone110bn4nC" into your FirstEagles/Sounds folder.
 
For FE2: Unzip the file and move the folder named "SPADA2" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SPADA2". Move the folder named "D" from the Aircraft/SPADA2 folder into the Decals/SPADA2 folder you just made. You also need to move the sound file "rhone110bn4nC" into your FirstEagles/Sounds folder.
 
 
To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".

The Aviatik-Berg D.I had many variations, with different engines, different radiator configurations, different fuselage shapes, and different gun placements. This is a very early version, with a 185hp Daimler engine and a non-synchronized Schwarzlose machine gun mounted above the wing.
 
The machine gun is detachable and can be mounted or unmounted in the Loadout screen.
 
I have included one of Quack74's basic skins and decal sets with a set of serial numbers which will be applied randomly to each plane.
 
This plane has an extra piece that was not included in Quack's skins, I have included skins for the new part to match each of Quack's skins, which you will need to add to each skin folder.
 
Historical Notes
This version of the Aviatik did not have a cutout in the upper wing and the fuselage was higher in front of the fuselage. My model is converted from a later version and has not been corrected because I wanted to make sure that all of Quack's skins would still work with this plane.
 
 
Credits
My great thanks to Ojcar for making the FM and the Schwarzlose weapon data, and for teaching me how to make weapon stations.
Thanks to Quack 74 for making the skin and decal set for all the Aviatiks, and for allowing me use one as the default skin for this plane.
And thanks to Nix for making the engine sound file.
 
 
Installation Instructions
If you are using FE1, you will need to use the Weapons Editor available from the Thirdwire Downloads area. You will also need to use a CAT file extractor utility (SFP1E Extract Utility available in the CombatACE Downloads area.)
 
 
For FE1 - Unzip the file and move the folder named "AviatikD1_185" into the FirstEagles/Objects/Aircraft folder. This file uses the same sound file as the original AviatikD1. If you did not install that plane then you will also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
 
To install the gun - If you haven't already done so, extract the WeaponData.INI and the WeaponData.DAT files from the FirstEagles ObjectData.CAT file. Make a new folder named "Weapons" in the FirstEagles/Objects folder. Put the two extracted files into the new folder.
 
In my download, open the file named "Single_Schwarzlose_Angled_Data.INI," copy everything and paste it at the end of the "WeaponData.INI" you just extracted. Then change the number (WeaponData001) to the next consecutive number. Save the file.
 
In my downlaod, copy the files named "Schwarzlose.BMP" and "SchwarzloseAngle.LOD" and put them into the FirstEagles/Objects/Weapons folder.
 
Open the Weapons Editor, Open the WeaponsData.INI, make sure the new weapon (Single_Schwarzlose_Angled) is there, click "Save" and Close the editor.
 
 
For FE2 - Unzip the file and move the folder named "AviatikD1_185" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AviatikD1_185". Move the folder named "D" from the Aircraft/AviatikD1_185 folder into the Decals/AviatikD1_185 folder you just made. This file uses the same sound file as the original AviatikD1. If you did not install that plane then you will also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
 
To install the gun - From my download, copy the folder named "Single Schwarzlose Angled" into your Objects/Weapons folder.

it's just a variant of DFWCV in DFWCI for FE with patch
from an idea of Bortdafarm
i hope you love to fly with this plane too
 
thank for all people that work on this great game

Hope someone can make a better skin for Roland D.VIa

Stock AI RE8 made player-flyable, for FEG & FE2. See readme for installation etc. Loadout screen locks up in FE2; will upload fix if/when found.
 
OFF has a Harry Tate already, RoF is about to get one. Couldn't find an RE8 for FE so made this myself.

November-December 2007
 
Hanriot HD1 (Vickers MG in the middle)
 
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
 
 
 
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

Hansa-Phonix KD1 "Star-Strutter" Ver.1 05 April 2009
 
Model, Skin & FM by by Andre (Laton) Simpson
 
This aircraft represents the late version Star-Strutters made under licence by Phonix. They had better pilot seating, a larger rudder/tail assembly and more powerful engine than the original Hansa-Brandenberg variant (which will my next release.)
 
Please check the read-me for installation instructions.
 
 
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes

This version includes a new FM made by ojcar.
When the Ukrainian city of Odessa was occupied by Austria-Hungary early in 1918, the Anatra factory was found intact and production of the Anatra DS was continued as the "Anatra C.I". Many of the first Austrian versions had the Austrian cross painted over the Russian insignia.
The Anatra C.I was used mostly for training, but some were used for reconnaissance, as a fighter and light bomber. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
In version 2 - I have created a separate version for the Austrian plane, with a Schwarzlose machine gun and German bombs in the loadout. There are two Austrian skins, one with crosses painted over the Russian roundels, and one with standard insignia. (I have also included a postwar Yugoslav skin, because I like the insignia.) I have included my skinning templates for those who want make their own skins.
In version 3 - Ojcar has made a new FM for the plane. I have refined the wings and added some details. I created a new cockpit with German gauges and machine gun. I made two Austrian skins for the plane and I kept the Yugoslav skin, because I like the insignia. I have included my skinning templates for those who want make their own skins.
Historical Notes:
The serial numbers are fictitious. I found several sources which said that Anatras carried a machine gun mounted on the fuselage for the pilot. I couldn't find any details of the mounting, so I guessed where it might be located.
Credits:
My thanks to Ojcar once again for making a new data.ini file for this plane.
Installation instructions:
This revision replaces previous versions. If you have an older version, please delete it, then install the new version.
For FE1: Unzip the file and move the folder named "AnatraC1" into the FirstEagles/Objects/Aircraft folder. 
For FE2: Unzip the file and move the folder named "AnatraC1" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AnatraC1". Move the folder named "D" from the Aircraft/AnatraC1 folder into the Decals/AnatraC1 folder you just made. 
 

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
OEF ALBATROS DII For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
Oeffag built Albatros DII
single SCHWARZLOSE machine gun
 
notes;;;
fm- player version (hard)
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE
 
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE

The Rumpler 6B was a float plane version of the Rumpler C.I. It had more forward stagger to the upper wing and a larger rudder than the land version. The fuselage was also modified to make the plane a one man fighter.
 
I have made an early version, the 6B-1. The 6B-2 was introduced later and was slightly larger, had a different tail, and didn't perform as well as the 6B-1. The Rumpler 6B-1 was a fighter and saw service in the Baltic, the North Sea, and the Black Sea.
 
Since it's a float plane, the 6B-1 works best in the Flanders, Gibraltar or other terrain that has a lot of water. The plane will actually take off and land from a conventional airfield, but it looks strange to see the floats going under the ground. It would be best to start the missions in the air.
 
I have included two skins, a standard German "Sea Hex" camo and a mottled green and blue camo. My skinning templates are included with the download. I have also included a set of number decals.
 
Credits
Thanks to Ojcar for making the data file for the Rumpler 6B-1 and for providing information on the appearance of the plane.
Thanks to Nix for providing the sound for the Mercedes engine.
 
 
Installation Instructions
For FE1 - Unzip the file and move the folder named "Rumpler6B1" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "mercedes160m2.wav" into the FirstEagles/Sounds folder.
 
For FE2 - Unzip the file and move the folder named "Rumpler6B1" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "Rumpler6B1". Move the folder named "D" from the Aircraft/Rumpler6B1 folder into the Decals/Rumpler6B1 folder you just made. You also need to move the sound file "mercedes160m2.wav" into the FirstEagles/Sounds folder.

November-December 2007
 
 
Hanriot HD1 CAM (Italy) (Vickers MG on the leftside)
 
 
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
 
 
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs

The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
 
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
 
 
ALBATROS DI For FIRST EAGLES
 
INSTALL TO THE AIRCRAFT FOLDER...
 
MADE WITH 3DS MAX
BY BORTDAFARM
 
feel free to fart about with the bits n bobs
 
notes;;;
fm- player version (hard)
 
this version comes with a shadow file
tho you will need to switch this on in the config file
like thus
 
[shadow]
CastShadow=TRUE
 
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
 
to
 
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE