54 files
-
Farman F.30
By Stephen1918
Russia was the only country that used the French designed Farman F.30. While no other allies adopted it, the F.30 was the primary plane of the Imperial Russian Air Service and the Russians built about 400 of them at the Dux factory near Moscow beginning in 1915. It was used throughout WWI and was used by both sides during the Russian Civil Wars.
The Farman F.30 was powered my a Salmson 150hp water-cooled engine, had a single machine gun for the observer, and was said to be able to maneuver as well as the Eindeckers it faced. It was a general purpose plane, used originally as a fighter, and later for recon, artillery spotting, and light bomber missions.
My plane includes a loadout for a light bomb load. Decals and my skinning templates are included in the download.
I have included ojcar's "DummyMachineGun" data, Peter01's Lewis Machine Gun data in the download.
Warning
The Farman F.30 has a wider wingspan than First Eagles expects so you should install my "Airfields for Large Planes" available in the Combat Ace downloads area. Otherwise, when starting on the runway, your wings may be touching the wings of the planes next to you. This will cause an immediate collision and you or other planes in your flight may lose their wingtips as soon as the game starts.
Credits
Thanks to Ojcar for making the data file for the Farman F.30 and for making the data for the dummy machine gun.
Thanks also to Peter01 who made the data for the Lewis Gun.
Thanks also to Crowford who provided resources for the Farman cockpits.
Installation Instructions
For FE1 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder.
For FE2 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "FarmanF30". Move the folder named "D" from your Aircraft/FarmanF30 folder into the Decals/FarmanF30 folder you just made.
You may not need to install the guns, they have been used on other planes and you may already have them. Instructions for installing the guns, if you should need them, are in a separate file included in this download.
184 downloads
(3 reviews)0 comments
Submitted
-
Ansaldo SVA5
By Laton
Ansaldo S.V.A.5 Ver 1.1 30 April 2009
Model, Skin & FM by by Andre (Laton) Simpson
Please check the read-me for installation instructions.
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes
**1.1 - Mesh fix and changed FM
875 downloads
(3 reviews)0 comments
Updated
-
Airco D.H.5
By Stephen1918
The Airco D.H.5 was intended to be an improved version of the D.H.2, combining the power of a forward facing prop with the forward visibility of a pusher. The reverse stagger of the wings was an unusual configuration and the strange appearance of the plane may have contributed to false rumors of its bad performance. Although a slow climber, the D.H.5's strength and maneuverability made it excellent for ground attack and light bombing missions.
I have included two skins with decal ini's for both British and Australian markings. Both use the letter decals that come with First Eagles, which you can set in the Loadout screen. The British skin allows you to also set the squadron. (The Australians all used a white stripe on the tail instead of squadron markings.) I have included a set of serial numbers which will be applied randomly.
You can also choose a light bomb load in the Loadout screen.
Historical Notes
The serial numbers are fictious, but in the correct range for most D.H.5s.
Credits
My thanks to Ojcar for once again making an excellent data file for the D.H.5.
My thanks also to Nix for providing the realistic sound file for the Le Rhône engine.
Installation Instructions
For FE1 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AircoDH5". Move the folder named "D" from the Airplanes/AircoDH5 folder into the Decals/AircoDH5 folder you just made. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.
551 downloads
-
Voisin LAS - 2 pack
By Stephen1918
The Voisin III was developed in 1914 and used throughout the war. It was produced in large numbers and was used by all the Entente powers. Although it was originally used as a fighter, reconnaissance, and ground attack plane, it was most commonly used as a bomber later in the war.
My version is the Voisin LAS with a full chord lower wing, a 9 cylinder water-cooled Salmson engine, and an 8mm Hotchkiss magine gun mounted on a tripod over the pilot.
Ojcar has created two data.ini's for the Voisin LAS, one for the 120hp engine, and one for the 150hp engine. For your convenience, I have created a completely separate plane for each. The models, decals and skins are the same, but the data.ini's and loadouts are different, with lighter bomb loads for the 120hp plane.
I have included three skinning options for each plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included my skinning templates.
I have also included decals for serial numbers which will be applied randomly.
There doesn't seem to be any standard way for the Voisin to carry its bombs, so I have included several loadouts with different sized bombs carried in different positions, with appropriate weights for each plane. (The loadout names are based on the size of the bombs, not the total loadout weight.)
Historical Notes:
The serial numbers are fictious, but in the correct range for the Voisin LAS.
The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.
Credits:
My thanks once again to Ojcar for making two excellent data.ini files for this plane.
Thanks also to Sinbad, 33Lima, and Dreamk who provided reference materials for the Voisin LAS.
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
Installation instructions:
For FE1: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder.
For FE2: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create two new folders named "Voisin3_120" and "Voisin3_150". Move the folder named "D" from the Airplanes/Voisin3_xxx folders into the corresponding Decals/Voisin3_xxx folders you just made.
To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".
563 downloads
(3 reviews)0 comments
Updated
-
Voisin Type V with 37mm cannon
By Stephen1918
The Voisin Type V was a slightly improved version of the Voisin III, with minor changes to the 150hp Salmson engine, a more streamlined nacelle, and staggered wings. It was first used in 1915, but was not a significant improvement over the Voisin III and served alongside it rather than replacing it. Some Type Vs were equipped with a a 37mm Hotchkiss cannon mounted in the nose and were successfully used for ground attack missions.
In my model, the 37mm cannon is rigged as an internal gun, so the pilot can fire it. The gunner would normally sit or stand directly behind the cannon, but I have placed him to the side so you can get a clear view of your target. As a result, some of the cockpit details have been altered, but are still reasonable.
Ojcar has created the data file for the plane, and spent some time tweaking the gun data to get it to perform more realistically. (You will have to reload between shots.)
I have included three skinning options for the plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included all my skinning templates. This is slightly different from the Voisin III and the skins are not interchangeable.
I have also included decals for serial numbers which will be applied randomly.
Historical Notes:
The serial numbers are fictious, but more or less in the correct range for the Voisin Type V.
The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.
Details of the gunner and gunner's cockpit have been altered to make it possible for the pilot to fire the gun.
Credits:
My thanks to Ojcar for making the data file for this plane, and for massaging the data for the gun to get a more realistic effect.
Installation instructions:
For FE1: Unzip the file and move the folder named "Voisin5" into the FirstEagles/Objects/Airplanes folder.
For FE2: Unzip the file and move the folder named "Voisin5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "Voisin5". Move the folder named "D" from the Airplanes/Voisin5 folder into the Decals/Voisin5 folder you just made.
A note about Effects -
I have used the 37mm Hotchkiss 1885 cannon in my plane. In First Eagles, this is usually used as a ground object and the gun fire animation is quite large. If you have a slow computer, you may not be able to see the fire effect unless you have shadows turned off.
If you have downloaded p10ppy's SPAD XII, then you already have a nice fire effect for an aircraft mounted cannon (with smoke blowing back over the cockpit). The effect is in a file named "37mmSPAD.ini" in your Effects folder and is named "37mmFireEffectEnH". You can edit the GunData.ini for the 37MM_HOTCHKISS_1885 to use the better effect by changing the effect name to read:
GunFireEffect=37mmFireEffectEnH
497 downloads
(3 reviews)0 comments
Updated
-
RAF BE12
By Stephen1918
The BE12 was a single seat version of the BE2c introduced in 1916. It had the wings of the BE2c, but had a larger, 12 cylinder (RAF4a) engine. There was a synchronized Vickers gun mounted on the side of the fuselage and it could carry up to 230 pounds of bombs. The more powerful engine made the BE12 a faster plane, but it didn't have the maneuverability required for a fighter. The BE12 was used mostly for recon and light bombing missions.
My BE12 has three loadouts for light, medium, amd heavy bombs. I have included two skins, a green paint (PC10), and a clear doped linen skin. A full set of number decals and my skinning templates are included in the download.
Credits
Thanks to Ojcar for making the data file for the BE12, and for providing reference materials for the plane.
Installation Instructions
For FE1 - Unzip the file and move the folder named "RAFBE12" into the FirstEagles/Objects/Aircraft folder.
For FE2 - Unzip the file and move the folder named "RAFBE12" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "RAFBE12". Move the folder named "D" from the Aircraft/RAFBE12 folder into the Decals/RAFBE12 folder you just made.
243 downloads
(3 reviews)0 comments
Submitted
-
Martinsyde G.102
By Geezer
The Martinsyde G.102 was a G.100 aircraft with a more powerful 160 hp Beardmore engine, which gave it slightly better performance. Again I could not have produced this upload without the patient help from Stephen1918, ocjar, gterl, and Wrench. Thanks, guys.
259 downloads
-
Lebed 12
By Stephen1918
The Lebed 12 was a Russian general purpose plane introduced in early 1917. It saw service through the remainder of the war and was used extensively by both sides in the civil wars. It was the most highly produced Russian designed aircraft of World War I and equipped four divisions as well as several training schools. The Lebed 12 was armed with a single Colt-Browning machine gun and could carry a small bomb load.
My version has two skins. I have included my skinning templates, decals for the Lebed version insignia for the tail and fuselage, and Peter01's data for the Colt-Browning machine gun. Installation instructions for the gun data are included in a separate text file, included with the download.
Credits:
My thanks to Ojcar for making the FM file for this plane, and for making adjustments for the machine gun and loadouts.
Thanks to Peter01 for making the improved data for the Colt-Browning machine gun.
Thanks to Crowford for correcting how I placed the decals.
Installation instructions:
For FE1: Unzip the file and move the folder named "Lebed12" into the FirstEagles/Objects/Aircraft folder. To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".
For FE2: Unzip the file and move the folder named "Lebed12" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "Lebed12". Move the folder named "D" from the Aircraft/Lebed12 folder into the Decals/Lebed12 folder you just made. To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".
228 downloads
-
Farman F.40
By Stephen1918
The Farman F.40 was a joint design by the two Farman Brothers, Maurice and Henri, combining features of the MF.11 and HF.22. Like the other Farman designs, placing the engine in the rear gave the gunner an open field of fire. The F.40 was used for reconnaissance and as a light bomber and was widely used by most of the Entente forces. The long wingspan gave stability, but made it slow to maneuver. French squadrons began replacing it in 1916.
My plane includes loadouts for a light bomb load and for Le Prieur rockets. I have included three skins, French, Belgian, and Russian. Decals and my skinning templates are included in the download.
I have included ojcar's "DummyMachineGun" data, Peter01's Lewis Machine Gun data and P10ppy's Le Prieur rockets with this download.
Warning
The Farman F.40 has a wider wingspan than First Eagles expects so if you start on the runway, your wings will be touching the wings of the planes next to you. This will cause an immediate collision and you or other planes in your flight may lose their wingtips as soon as the game starts. Best to start in the air, or modify the airfield.ini in the terrain folder to space out the planes on the runway.
Credits
Thanks to Ojcar for making the data file for the Farman F.40 and for making the data for the dummy machine gun. And for helping me with the installation package for FE2.
Thanks also to P10ppy who made the Le Prieur rockets, and to Peter01 who made the data for the Lewis Gun.
Thanks also to Crowford who provided resources for the Farman cockpits.
-----------------------------
Installation Instructions
For FE1 - Unzip the file. Move the folder named "FarmanF40" into your FirstEagles/Objects/Aircraft folder.
For FE2 - Unzip the file. Move the folder named "FarmanF40" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "FarmanF40". Move the folder named "D" from your Aircraft/FarmanF40 folder into the Decals/FarmanF40 folder you just made.
You may not need to install the guns or rockets, they have been used on other planes and you may already have them. Instructions for installing the guns and rockets, if you should need them, are in a separate file included in this download.
283 downloads
(3 reviews)0 comments
Updated
-
Polish Anatra DS "Anasal"
By Stephen1918
The Anatra DS was a two seat Russian plane powered by a Salmson 9 cylinder, water cooled, rotary engine. The plane was therefore called the "Anasal", short for "Anatra Salmson". When the Ukrainian city of Odessa was occupied by Austria-Hungary early in 1918, the Anatra factory was found intact and production continued as the "Anatra C.I". Many of the first Austrian versions had the Austrian cross painted over the Russian insignia.
The Anatra DS was used mostly for reconnaissance, but also as a fighter and light bomber. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
Poland declared its independence in late 1917. The new nation armed itself with whatever was available, including abandoned Russian, German and Austrian planes, and purchased planes from other nations. Several Anatra DS were purchased from the Anatra factory in Odessa.
The Polish Anantra DS was identical to the Russian version, except for slight changes to the cowling, the radiator, and the rudder. The skins to my plane are similar, but not identical to my Russian version. As a resullt, I have included new skinning templates for the Polish Anasal.
Historical Notes:
I found several sources which said that Anatras carried a machine gun mounted on the fuselage for the pilot. I couldn't find any details of the mounting, so I guessed where it might be located.
I don't know how the Poles armed their plane, so I used the guns I used on the Russian version. I also included a small bomb load.
Credits:
My thanks to Ojcar once again for making a new data.ini file for this plane.
Installation instructions:
For FE1: Unzip the file and move the folder named "PolishAnasal" into the FirstEagles/Objects/Aircraft folder.
For FE2: Unzip the file and move the folder named "PolishAnasal" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "PolishAnasal". Move the folder named "D" from the Aircraft/PolishAnasal folder into the Decals/PolishAnasal folder you just made.
64 downloads
(3 reviews)0 comments
Submitted
-
Avro504C
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
------------------------------------------------------------------------------------------------
AVRO 504C For FIRST EAGLES
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...
notes;;;
fm- player version (hard)
slot car flyers need not apply!
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
to
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
838 downloads
-
Avro504D
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
AVRO 504D For FIRST EAGLES
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...
notes;;;
fm- player version (hard)
slot car flyers need not apply!
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
to
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
1,225 downloads
(2 reviews)0 comments
Updated
-
Sikorsky S-16 Flatdeck
By Stephen1918
Several versions of the S-16 were produced with slight variations in the fuselage and wing configurations. This version has a flat deck behind the pilot and ailerons on both wings. It is based on my earlier versions of the Sikorsky S-16, but is a completely new plane.
The download includes 4 skins - 3 linen and one green - with appropriate decals. This plane has a fully functional cockpit. I have included my skinning templates so others can make new skins if they want.
Credits
My thanks to ojcar, who made the FM for the Sikorsky S-16.
My thanks also to Nixou, who recorded the sound for the Gnome 80hp engine.
Version 2 Notes
I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.
Version 3 Notes
This is a completely new plane with new LODs, skins, and cockpit. This version has higher detail and a lower poly count than the previous version. This model also includes better detail for battle damage to the wings.
Installation instructions
This is a completely new plane, if you have already installed the Sikorsky S-16 flatdeck, delete it, including the decals, and replace it with this version. The sound file remains the same.
For FE1 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. If you have the previous version, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16_var". Move the folder named "D" from the Aircraft/SikorskyS16_var folder into the Decals/SikorskyS16_var folder you just made.
If you have the previous version of the Sikorsky, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
419 downloads
(2 reviews)0 comments
Updated
-
Hanriot HD.2
By Stephen1918
The Hanriot HD.2 was a French, single seat float plane version of the Hanriot HD.1. It had a larger tail, shorter wings, and mounted 2 Vickers machine guns. It was used by the French as an interceptor, defending seaplane bases, and as an escort for reconnaissance planes.
Since it's a float plane, the Hanriot HD.2 works best in the North Sea terrain, or in Flanders, Gibraltar or other terrain that has a lot of water. The plane will actually take off and land from a conventional airfield, but it looks strange to see the floats going under the ground.
I have included two skins, a generic linen skin and a 4 color camo skin. The camo skin may be fictitious and uses the French 4 color camo pattern, but with blue and grey colors instead of greens and browns. I have included a set of decals. My skinning templates are included with the download.
Credits
Thanks to Ojcar for making the data file for the Hanriot HD.2 and for providing information for the cockpit.
Thanks to Nix for providing the sound for the engine.
Installation Instructions
For FE1 - Unzip the file and move the folder named "HanriotHD2" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "clerget9b2m2.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "HanriotHD2" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "HanriotHD2". Move the folder named "D" from the Aircraft/HanriotHD2 folder into the Decals/HanriotHD2 folder you just made. You also need to move the sound file "clerget9b2m2.wav" into the FirstEagles/Sounds folder.
269 downloads
(2 reviews)0 comments
Updated
-
RAF BE12a
By Stephen1918
The BE12a was a single seat version of the BE2e introduced in 1917. It was intended to be an improvement over the BE12, but the wing configuration did not improve maneuverability very much and it was only produced in small numbers. Like the BE12, it carried a synchronized Vickers gun mounted on the side of the fuselage and could carry up to 230 pounds of bombs. The BE12a was used briefly on the Western Front but saw much of its service in Palestine.
My BE12a has three loadouts for light, medium, amd heavy bombs. I have included a green paint (PC10) skin and a full set of number decals. My skinning templates are included in the download.
Credits
Thanks to Ojcar for making the data file for the BE12a, and for providing reference materials for the plane.
Installation Instructions
For FE1 - Unzip the file and move the folder named "RAFBE12a" into the FirstEagles/Objects/Aircraft folder.
For FE2 - Unzip the file and move the folder named "RAFBE12a" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "RAFBE12a". Move the folder named "D" from the Aircraft/RAFBE12a folder into the Decals/RAFBE12a folder you just made.
231 downloads
(2 reviews)0 comments
Submitted
-
Final Martinsyde G.100
By Geezer
This is the final update of the Martinsyde G.100, thanks to Stephen1918 who tweaked the files. The bomb racks now only show when the plane is carrying bombs, the prop spins, sample decals have been added for anyone who wants to make his own markings, and revised installation instructions have been added - all due to Stephen1918's efforts. Thanks, Steve.
I mistakenly attached the files for the G.102 to this upload - when released by CA, it will now have the correct G.100 files.
293 downloads
-
Anatra D "Anade"
By Stephen1918
The Anatra D was a predecessor to the Anatra DS. It was powered by a Gnome rotary engine and armed with a single machine gun for the observer. The Anatra D was used mostly for reconnaissance, but also as a fighter and light bomber. After overcoming some initial design problems, it entered service in May, 1916 and was produced in relatively large numbers. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
I have included two skins, a plain linen and a grey paint. A full set of number decals and a loadout for light bombs are included. I have also included my skinning templates for those who wish to make their own skins.
Credits:
My thanks to Ojcar once again for making the excellent data.ini for this plane.
My thanks also to Crowford who provided valuable reference material for the Anatra D.
Installation instructions:
For FE1: Unzip the file and move the folder named "AnatraD" into the FirstEagles/Objects/Aircraft folder.
For FE2: Unzip the file and move the folder named "AnatraD" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AnatraD". Move the folder named "D" from the Aircraft/AnatraD folder into the Decals/AnatraD folder you just made.
156 downloads
-
Pomilio PE
By Stephen1918
The Pomilio PE was a two seat, Italian general purpose plane that entered service in 1917. It had a 300hp Fiat 6 cylinder engine with a radiator mounted in the nose of the aircraft. A fin under the fuselage, around the tail skid, helped improve the stability of the plane.
The Pomilio PE was used primarily for reconnaissance and was armed with a fixed Fiat-Revelli machine gun over the wing with a ring mounted machine gun operated by the observer. The Pomilio could carry a light bomb load with 3 bombs mounted on the each side of the plane.
My Pomilio PE includes 2 skins - a green/yellow speckled camo, and a 3 color camo - each with appropriate decals. I have included a small bomb loadout. I have included my skinning templates with the download.
Historical Notes:
- My Pomilio PE uses the later style fuselage with a flatter deck behind the pilot because it allowed me to give greater range to the gunner in the game.
- I have taken extensive liberties with the speckled camo skin version of the plane. When the camouflage was applied at the factory, it usually covered the metal panels around the engine. The speckled camo scheme was not applied to the top of the lower wing. The national insignia on the top wing did not usually extend into the aileron. The 3 color camo version is much more accurate and is the default skin.
Credits:
My thanks to Ojcar for making the data.ini file for this plane.
Installation instructions:
For FE1: Unzip the file and move the folder named "PomilioPE" into the FirstEagles/Objects/Aircraft folder.
For FE2: Unzip the file and move the folder named "PomilioPE" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "PomilioPE". Move the folder named "D" from the Aircraft/PomilioPE folder into the Decals/PomilioPE folder you just made.
148 downloads
(2 reviews)0 comments
Submitted
-
MartinsydeS1
By Flamer50
This is the last machine that Bort' built for 1st eagles that I'm aware of.
The S1 wasn't in the original upload because it hadn't been done untill
later, by which time the both of us had pretty much left the scene.
As Bortdafarms web page is long gone, I'm adding the S1 to the collection here at CombatACE.
Disclaimer: This zip file(MartinsydeS1.zip) is the sole work and property of Bortdafarm.
Uploaded by Bwf.
289 downloads
(1 review)0 comments
Submitted
-
Anatra DS "Anasal"
By Stephen1918
This version includes a new FM made by ojcar.
The Anatra DS was a two seat Russian plane powered by a Salmson 9 cylinder, water cooled, radial engine. The plane was therefore called the "Anasal", short for "Anatra Salmson". When the Ukrainian city of Odessa was occupied by Austria-Hungary early in 1918, the Anatra factory was found intact and production continued as the "Anatra C.I". Many of the first Austrian versions had the Austrian cross painted over the Russian insignia.
The Anatra was used mostly for reconnaissance, but also as a fighter and light bomber. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
In version 2 - I have included a loadout for a light bomb load and three skinning options - A generic Russian skin, and skins for two Russian squadrons - the 19th and the 4th squadrons with decals for the squadron tail markings. I have included my skinning templates for those who want make their own skins.
In version 3 - I improved the details around the nose, completely reskinned the plane and cockpit, and corrected several problems with node names in the data file. New templates are included in the version 3 download.
In version 4 - Ojcar has made a new FM for the plane. I have refined the wings and added some details. Old skins will still work with this revision. I have included the old skinning templates with the download.
Historical Notes:
I found several sources which said that Anatras carried a machine gun mounted on the fuselage for the pilot. I couldn't find any details of the mounting, so I guessed where it might be located.
Credits:
My thanks to Ojcar once again for making a new data.ini file for this revision of the plane.
Installation instructions:
This revision replaces previous versions. If you have an older version, please delete it, then install the new version.
For FE1: Unzip the file and move the folder named "AnatraDS" into the FirstEagles/Objects/Aircraft folder.
For FE2: Unzip the file and move the folder named "AnatraDS" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AnatraDS". Move the folder named "D" from the Aircraft/AnatraDS folder into the Decals/AnatraDS folder you just made.
422 downloads
-
Flyable RE8 for First Eagles Gold & First Eagles 2
By 33LIMA
Stock AI RE8 made player-flyable, for FEG & FE2. See readme for installation etc. Loadout screen locks up in FE2; will upload fix if/when found.
OFF has a Harry Tate already, RoF is about to get one. Couldn't find an RE8 for FE so made this myself.
572 downloads
-
Airco DH9
By Stephen1918
The Airco DH9 was introduced early in 1918 as an intended replacement for the DH4. The pilot was seated closer to the gunner in the DH9 and an internal bomb compartment was provided. However, because of the DH9's low performance and unreliable engine, the DH4 remained the better bomber until the DH9a was introduced a few months later. Nevertheless, the DH9 did operate with better success on the Eastern and Palestinian fronts where it faced fewer enemy fighters.
I have included two skins, a brown and an olive color. Both use the letter decals that come with First Eagles (which you can set in the loadout screen) and I have included a set of serial numbers which will be applied randomly. There are also loadouts for light, medium, and heavy bomb loads.
The skins are rather generic, I have included my skinning templates for those who wish to make better skins.
Credits
My thanks to Ojcar for once again making an excellent data file for the DH9.
My thanks also to Sinbad for providing a great deal of resource information for this plane.
Installation Instructions
For FE1 - Unzip the file and move the folder named "AircoDH9" into the FirstEagles/Objects/Airplanes folder.
For FE2 - Unzip the file and move the folder named "AircoDH9" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AircoDH9". Move the folder named "D" from the Airplanes/AircoDH9 folder into the Decals/AircoDH9 folder you just made.
April 5, 2012 - Replaced data file with new version to fix problem with take offs and landings and to make the plane fly better.
452 downloads
-
Airco DH9a "Ninak"
By Stephen1918
The Airco DH9a, called the "Ninak" ("nine a") was introduced in June 1918 to replace the underpowered DH9. The 400hp Liberty engine required changes to the front of the fuselage, otherwise the plane was pretty much the same as the DH9. Although it was introduced late in the war, the DH9a did see service during the war, and was used extensively afterwards.
I have included two skins, a brown and an olive color. Both use the letter decals that come with First Eagles (which you can set in the loadout screen) and I have included a set of serial numbers which will be applied randomly. There are also loadouts for light, medium, and heavy bomb loads.
The skins are rather generic, I have included my skinning templates for those who wish to make better skins.
Credits
My thanks to Ojcar for once again making an excellent data file for the DH9a.
My thanks also to Sinbad for providing a great deal of resource information for this plane.
Installation Instructions
For FE1 - Unzip the file and move the folder named "AircoDH9a" into the FirstEagles/Objects/Airplanes folder.
For FE2 - Unzip the file and move the folder named "AircoDH9a" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AircoDH9a". Move the folder named "D" from the Airplanes/AircoDH9a folder into the Decals/AircoDH9a folder you just made.
April 5, 2012 - Replaced data file with new version to fix problem with take offs and landings and making the plane fly better.
429 downloads
-
Airco DH4 - 2 pack
By Stephen1918
Although best known in its role as a bomber, the Airco DH4 was intended to be a general purpose airplane and was used for recon and ground support as well. Early versions were powered by a 250hp Eagle engine. Later versions were powered with a 375hp Eagle engine, which made them very effective bombers. The biggest problem with the DH4 was the gas tank placed between the pilot and gunner, which made communication between the two almost impossible.
I have uploaded two versions of the DH4 - Ojcar has created two FMs for the plane, one with the early 250hp engine, and one with the later 375hp engine.
Both planes have two skins, a brown and an olive color. Both use the letter decals that come with First Eagles (which you can set in the loadout screen) and a set of serial numbers which will be applied randomly. There are also loadouts for light, medium, and heavy bomb loads. The skins, decals, and loadouts are interchangeable for the two planes.
The skins are rather generic, I have included my skinning templates for those who wish to make better skins.
Credits
My thanks to Ojcar for once again making two excellent data files for the DH4.
My thanks also to Sinbad for providing a great deal of resource information for this plane.
Installation Instructions
The two versions can be installed separately or both together.
For FE1 - Unzip the file and move the folders named "AircoDH4_250" and "AircoDH4_375" into the FirstEagles/Objects/Airplanes folder.
For FE2 - Unzip the file and move the folders named "AircoDH4_250" and "AircoDH4_375" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create new folders named "AircoDH4_250" and "AircoDH4_375". Move the folders named "D" from the Airplanes/AircoDH4 folders into the corresponding Decals/AircoDH4 folder you just made.
518 downloads
-
Moska MB bis
By Stephen1918
The Moska MB bis was a Russian single wing fighter, first deployed in 1916 and produced throughout the rest of World War I. It did not have a synchronized gun and the stock plane had the gun mounted at an angle to fire over the prop. I have created a "field modded" version with a horizontal gun and with deflector plates on the prop. Both versions use the same skins.
I have included my skinning templates with the download. The planes uses the stock decals, so there is no "D" folder with this plane.
One of the distinctive features of the Moska MB was that its wings could be folded for shipping and transport. I have included a static model, with folded wings, that can be used by modders in their terrains. The static version has a destroyed version and includes the Types.ini data.
Credits
Thanks to Ojcar for making the data file for the Moska MB bis.
Thanks also to Nix for creating the sound file for the Gnome 80hp engine.
Installation Instructions
For FE1 - Unzip the file and move the folders named "MoskaMBbis" and "MoskaMBbisMod"into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folders named "MoskaMBbis" and "MoskaMBbisMod"into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
196 downloads
Sign in to follow this
Followers
0
-
Download Statistics
14,210
Files12,492
Comments26,861
Reviews