Jump to content

First Eagles - WWI and Early Years - Add-On Aircraft


Sub Category  
SUBCATEGORIES
    1. Tweaked Flight Models and Realism Pack for FE2

      Hello Fellow Fliers of First Eagles 2,
      Version 11.0 of the FM/Realism Package for FE2 contains approximately 220 WWI aircraft types and sub-types, for your (virtual) flying enjoyment. For detailed installation instructions, please check over the main "Read Me First" file that is included, as well as several older (pdf) files and that cover aircraft performance info., tips, etc., across all previous versions of the FM update package.
      A great many thanks go out to Peter01 and Ojcar, also TexMurphy, for making most of those flight model files to begin with. Also a great thanks goes out to Stephen1918, MontyCZ and Laton for providing lots of beautiful planes and skins that go with those great flight models, to NBell for the many hitbox improvements provided for the planes, also to VonOben, Mike Dora and Crawford for many helpful suggestions, and to the A-Team by SkunkWorks for allowing me to tweak a few of the FMs for their models too. And of course a very big thanks goes out to Geezer for several fantastic, high-quality models that were produced for FE2.
      What I've done is tinkered with the data files further. Modifications in all cases, to a greater or lesser extent, include data under the following sections:

      (a) MissionData
      (b) FlightControl
      (c) AIData
      (d) Sound
      (e) AircraftData
      (f) Engine
      (g) Crew
      (h) Internal Guns
      (i) Control Surfaces
      (j) Landing Gears
      (k) Fuselage, Nose, Tail, Vertical Tail, LeftStab, RightStab, Rudder, Left/Right/Inner/Middle/Outer/Tip Wing components
       
      Enjoy and happy flying!,
      Von S
      NOTES: For several of Geezer's latest aircraft and my FMs for those aircraft (Nieuports, Pfalzes, etc.), which are not included in this package, please see the relevant post located towards the bottom of page 25 of the "New Aircraft" thread for FE2, on CombatAce. Also see relevant posts on pages 26, 27, and 28 of that same thread for Geezer's "early beta" collection that contains the Breguet XIV, Junkers J.I, and other updates, including performance info. for some of those aircraft types.
      DISCLAIMER: All Von S mods., for FE2, SF2, also WOFFue/pe/bh&h2, as well as for RoF (United Ed.), are subject to the CombatAce "freeware" terms of agreement. Mods. may be shared with others, included on other media devices, also modded further, providing that original documentation and/or credit is included, and providing that the mods. remain free to use. Von S mods. shall not be sold, resold, etc., and Von S takes no responsibility for injuries or fixations that may result from flying heavily tweaked FMs or from attempts to enjoy real flying without aid or instruction from a qualified flight instructor.
       

      915 downloads

         (7 reviews)

      51 comments

      Updated

    2. Laton Fokker Eindeckers for First Eagles 2

      Laton's Fokker Eindeckers for First Eagles 2
      Andre (Laton) Simpson Fokkers EI, EIa, EII, EIIa, EIII, EIIIa, EIV & EIVa pack for First Eagles 2. 
      This is a pack for Laton's Fokkers E, with 3D LODs setted to use jpg format. You still need all those Fokkers above installed in your FE 2 Aircraft main folder. This pack will only replace the original 3d LODs that still using BMP figures. 
      Also, I Hexa edited the LODs files of Laton's Fokker EIIa that had wire wheels. I comverted them to wheel covers, as they were usually in combat areas. 
      There is 4 optional (Vrt) used by Fokkers EI, EIa, EII, EIIa, EIV & EIVa  at your choice. You will find them on the folder "OPTIONAL PROPELLERS" .
      (2 "Garuda" propellers, one "Integrale" propeller and one "Germania" propeller) To use one of them just rename it as "Vrt". 
      I did, one new Spandau machine gun, one new Parabellum machine gun, Vrt, compass.jpg figures & a new Glass.tga textures.
      The Laton's Eindeckers 3d LODs are setted to use jpg files. So you will be able to use my new Spandau, Parabellum, Vrt and compass in jpg format figures together with Stephen1918's Fokkers cockpits using JPGs textures.
      __________________________________________________________________________________________________________
      Installation instructions for First Eagles 2: ONLY FOR FE 2 USERS (Laton's Fokker E aircrafts 3d LODs using JPGs)
      First make a back-up or rename all your "original Laton's Fokker E 3d LODs". 
      Make a back-up or rename all your COMPASS.BMP, SPANDAU.BMP, VRT.BMP, PARABELA.BMP, SPANDAU_BARREL.BMP and GlASS.TGA files. 
      Then just drop or copy all the Fokker folders from mine Aircraft folder to your Aircraft folder. 
      *ATTENTION*
      After this you must to convert all Fokker E "bmp" skin files that you are already have installed before to JPG format, using your favorite image editor.
      That's all. 
      __________________________________________________________________________________________________________
      Credits:
      - Julio Junqueira skin textures (JPG & TGA files) for Laton's Fokker Eindeckers.
      - Andre (Laton) Simpson for the Fokker Eindeckers 3D LODs.
      __________________________________________________________________________________________________________
      - special thanks to Andre (Laton) Simpson for the excellent Eindeckers models.
      - special thanks to CombatAce.com hosting the files.
      __________________________________________________________________________________________________________
      These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
       

      55 downloads

         (0 reviews)

      0 comments

      Submitted

    3. Nieuport 21

      The Nieuport 21 was designed to be a long range escort fighter. It used a Nieuport 17 airframe with the smaller Nieuport 11 engine to reduce fuel consumption and  extend its range. The lighter weight gave the plane a good climb rate, but the lower power engine reduced its speed.
      The Nieuport 21 served along with the Nieuport 17 on the Western Front. It was also licensed to the Dux factory in Russia and large numbers were used on the Eastern Front.
      My version of the Nieuport 21 is armed with a single Lewis gun mounted on the upper wing and has a loadout for eight Le Prieur Rockets for Balloon Busting missions. This package features two skins - one French, one Russian - a set of decals, and a fully functional cockpit. My skinning templates are included with the download.
      This plane uses the Le Prieur Rockets created by P10ppy and a sound file created by Nixou (included with his Realistic Engine Sounds package). Both of these files are available in the Combat Ace Download section. Both of these files are used by other aircraft, so you may already have them. I have included Nixou's sound file with this package in case you don't already have it.

      Credits:
      My thanks to Ojcar for making the data file for the Nieuport 21.
      My thanks to Nixou for making the sound file for the Le Rhone 80hp engine.

      Installation instructions:
      This aircraft uses P10ppy's Le Prieur rockets available in the CombatAce downloads section. You may already have it. If you don't, you'll have to download it and  install it into your Weapons folder.
      For FE1: 
      Unzip the file and move the folder named "Nieuport21" into your FirstEagles/Objects/Aircraft folder. If you don't already have it, copy the file named "LeRhone9c80hp1m4" from my Sounds folder into yours.
      For FE2: 
      Unzip the file and move the folder named "Nieuport21" into your FirstEagles/Objects/Aircraft folder. Then in your FirstEagles/Objects/Decals folder, create a new folder named "Nieuport21". Move the folder named "D" from the Airplanes/Nieuport21 folder into the Decals/Nieuport21 folder you just made. If you don't already have it, copy the file named "LeRhone9c80hp1m4" from my Sounds folder into yours.

      115 downloads

         (1 review)

      0 comments

      Updated

    4. EmlD Nieuport 27 E (trainer) for First Eagles 2

      EmlD Nieuport 27 E (trainer) "Issoudun Nieuport series" for First Eagles 2
      This is the last pack for the "Issoudun Nieuport series"  Featuring now the Nieuport 27 E used by United States at Issoudun, France to train their pilots.
      This is a full aircraft type, trying to represent the trainer Nieuport 27 used by United States.
      __________________________________________________________________________________________________________
      This pack features EmlD Nieuport 27 that I renamed Nieuport 27 E (trainer).
      You will find several versions for some of the planes with different colors at your choice.
      ** What you find in this Nieuport 27 E Pack:
      - Three (3) Nieuport 27 E Skins in several versions & Colors options. All used by 3rd Air Instructional Center (3rd AIC) at Issoudun France.
      1- Nieuport 27 E, "Jazbo" flown by Captain Keeling Gaines Pulliam, Jr. Commanding 21st Aero Squadron From March 16, 1918 to October 15, 1918. (several versions) 
      2- Nieuport 27 E.1 N.8655 "Old Doc Yak" flown by Lieutenant Quentin Roosevelt (son of the former President of the United States, Theodore Roosevelt) of 36th Aero Squadron. (several versions).
      3- Nieuport 27 E named "ISIS" flown by 31st Aero Squadron pilots.
      4- One Nieuport 27 (N27) of Lt Jacques Michael Swaab (Nieuport 27 skin)
      5- Geezer pilot figure new textures (US Pilot) that I painted to be used with Geezer's "wwiPilotNew3".
      The LODs are adjusted to use JPG textures but I included a folder with the BMPs files for First Eagles 1 users.
      You will find (4) four pilots layout options. The new texture has a "US UNIFORM" as standard layout.
      To use the others with scarfs, you must to exchange the file names:
      -To use the "DARK BLUE" scarf you must to rename 
      OPTIONAL-DARK BLUE-Pilot And Scarf.jpg to Pilot And Scarf.jpg 
      __________________________________________________________________________________________________________
      -To use the "LIGHT BLUE" scarf you must to rename 
      OPTIONAL-LIGHT BLUE-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      -To use the "US FLAG" scarf you must to rename 
      US FLAG-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      -To use the "US UNIFORM" you must to rename 
      US UNIFORM-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      6- A new cockpit textures in two options (1024x1024 JPG & TGA) & (2048x2048 JPG & TGA).(Included BMP files) for First Eagles 1 users.
      7- New hangar screens (several versions).
      __________________________________________________________________________________________________________
      - The LODs are adjusted to use JPG textures this is only for FE2 users.
      - I painted new textures for the cockpit. I drew a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
      - I'm releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
      - I set the 1024x1024(JPG & TGA) as standard for the planes. 
      - I painted as well, new hangars screens for these planes. The screens are in 1920x1200 size with some options for your choice.
      *OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
      __________________________________________________________________________________________________________
      The aircraft will fly only reconnaissance "RECON" missions.
      There is two options of flight model one by peter01 and other by VonS.  
      __________________________________________________________________________________________________________
      -INSTALLATION INSTRUCTIONS:
      *FE2 INSTALLATION
      - Drop or copy the folder "Nieuport 27 E" from mine "Aircraft" folder to your "Aircraft" folder. 
      - Drop or copy the folder "US Pilot" from mine "pilots" folder to your "Pilots" folder.
      - Drop or copy the folder "Nieuport 27 E" from mine "decals" folder to your "decals" folder. 
      That's all.
      __________________________________________________________________________________________________________
      *FE2 INSTALLATION for N27 of "Lt Jacques Michael Swaab" 
      - To use the Lt Jacques Michael Swaab (Nieuport 27 skin) 
      Drop or copy the folder "Swaab" from mine "N27" Aircraft folder to your "N27" Aircraft folder.
      Drop or copy the folder "Swaab", from mine "N27" Decals folder to your N27 "Decals" folder.

      *ATTENTION*
      In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27.ini" file.
      [TextureSetXXX]
      Directory=Swaab
      Name=Lt.Jacques Michael Swaab
      Nation=USAS
      Squadron=
      Specular=1.800000
      Glossiness=1.800000
      Reflection=0.000000
      Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27.ini" file order for others skins that you have already installed before.
      That's all.
      __________________________________________________________________________________________________________
      Credits:
      - Julio Junqueira texture skins for aircraft, pilot, cockpit and hangars.
      - EmlD for the excellent Nieuport 3d models.
      - Geezer for the excellent pilot 3d model (wwiPilotNew3)
      - peter01 for the excellent flight model ini file.
      - vonS for the excellent flight model ini file.
      - Panama Red for the excellent Nieuport 24 cockpit 3d LOD edition. 
      __________________________________________________________________________________________________________
      - Thanks EmlD, Geezer, peter01, vonS and Panama Red for their fantastic work.  
      - Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
      - special thanks to CombatAce.com hosting the files.
      __________________________________________________________________________________________________________
      These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
      __________________________________________________________________________________________________________

      43 downloads

         (0 reviews)

      1 comment

      Submitted

    5. EmlD Nieuport 24Bis E (trainer)for First Eagles 2

      EmlD Nieuport 24Bis E (trainer) "Issoudun Nieuport series" for First Eagles 2
      This is the second pack for the "Issoudun Nieuport series", featuring now the Nieuport 24 Bis used by United States at Issoudun, France to train their pilots.
      It's a full aircraft type, trying to represent the trainer Nieuport 24Bis used by United States.
      __________________________________________________________________________________________________________
      This pack features EmlD Nieuport 24Bis that I renamed Nieuport 24Bis E (trainer).
      You will find several versions for some of the planes with different colors at your choice.
      ** What you find in this Nieuport 24Bis Pack:
      - Five (5) Nieuport 24Bis E Skins in several versions & Colors options. All used by 3rd Air Instructional Center (3rd AIC) at Issoudun France.
      1- Nieuport 24Bis "Flying Fish" flown by Captain Harry S. Gwynne, commander of 33rd Aero Squadron. 
      Captain Gwynne Died in airplane accident in 9 june 1918 at Issoudun, France. (Nieuport 24Bis in several versions)  
      2- Nieuport 24Bis named "HELEN" flown by pilots of 101st Aero Squadron at Issoudun. (Two rudder versions) 
      3- One (1) Nieuport 24Bis flown by pilots of 31st Aero Squadron.
      4- Two (2) Nieuport 24Bis of unknown squadrons used by "3rd AIC" at Issoudun.
      5- Geezer pilot figure new textures (US Pilot) that I painted to be used with Geezer's "wwiPilotNew3".
      The LODs are adjusted to use JPG textures but I included a folder with the BMPs files for First Eagles 1 users.
      You will find (4) four pilots layout options. The new texture has a "US UNIFORM" as standard layout.
      To use the others with scarfs, you must to exchange the file names:
      -To use the "DARK BLUE" scarf you must to rename 
      OPTIONAL-DARK BLUE-Pilot And Scarf.jpg to Pilot And Scarf.jpg 
      __________________________________________________________________________________________________________
      -To use the "LIGHT BLUE" scarf you must to rename 
      OPTIONAL-LIGHT BLUE-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      -To use the "US FLAG" scarf you must to rename 
      US FLAG-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      -To use the "US UNIFORM" you must to rename 
      US UNIFORM-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      6- A new cockpit textures in two options (1024x1024 JPG & TGA) & (2048x2048 JPG & TGA).(Included BMP files) for First Eagles 1 users.
      7- New hangar screens (several versions).
      __________________________________________________________________________________________________________
      - The LODs are adjusted to use JPG textures this is only for FE2 users.
      - I painted new textures for the cockpit. I drew a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
      - I'm releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
      - I set the 1024x1024(JPG & TGA) as standard for the planes. 
      - I painted as well, new hangars screens for these planes. The screens are in 1920x1200 size with some options for your choice.
      *OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
      __________________________________________________________________________________________________________
      - The aircraft will fly only reconnaissance "RECON" missions.
      - This pack has two options of flight model one by peter01 and other by VonS.  
      __________________________________________________________________________________________________________
      INSTALLATION INSTRUCTIONS:
      FE2 INSTALLATION
      - Drop or copy the folder "Nieuport 24Bis E" from mine "Aircraft" folder to your "Aircraft" folder. 
      - Drop or copy the folder "US Pilot" from mine "pilots" folder to your "Pilots" folder.
      - Drop or copy the folder "Nieuport 24Bis E" from mine "decals" folder to your "decals" folder. 
      That's all, you are ready to train at Issoudun.
      __________________________________________________________________________________________________________
      Credits:
      - Julio Junqueira texture skins for aircraft, pilot, cockpit and hangars.
      - EmlD for the excellent Nieuport 3d models.
      - Geezer for the excellent pilot 3d model (wwiPilotNew3) 
      - peter01 for the excellent flight model ini file.
      - vonS for the excellent flight model ini file.
      - Panama Red for the excellent Nieuport 24 cockpit 3d LOD edition. 
      __________________________________________________________________________________________________________
      - Thanks EmlD, Geezer, peter01, vonS and Panama Red for their fantastic work.  
      - Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
      - special thanks to CombatAce.com hosting the files.
      __________________________________________________________________________________________________________
      These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
      __________________________________________________________________________________________________________

      40 downloads

         (0 reviews)

      0 comments

      Submitted

    6. EmlD Nieuport 24 E (trainer) for First Eagles 2

      EmlD Nieuport 24E (trainer) "Issoudun Nieuport series" for First Eagles 2
      This is a full aircraft type, trying to represent the trainer Nieuports used by United States at Issoudun.
      "Issoudun Nieuport series" a set of several Nieuports used by the United States to train pilots during WW1 in France at Issoudun airdrome. Many of these Nieuports had very atypical painting schemes, between them, two with fish scales were "The Jazbo" And the "Flying Fish" (also called the "Dragon ship" or "Gwynne's Goldfish") and several others. Also these were considered "special ships" and representative of their unit. Often they were just for formation flying. Each crew tried to keep these bird primed for inspection. At Field eight there were multiple single coloured Nieuport 24 types used as aggressors for camera armed dogfights so a student could prove he had gotten his opponent. I gathered most of them in this series of skins.  
      This first pack features EmlD Nieuports 24 that I renamed Nieuport 24E (trainer).
      You will find several versions for some of the planes with different colors at your choice.
      ** What you will find in this Nieuport 24 Pack:
      - Eight (8) Nieuport 24 Skins in several versions & Colors options. All used by 3rd Air Instructional Center (3rd AIC) at Issoudun France.
      1- Two (2) Nieuport 24 flown by pilots 0f 31st Aero Squadron.
      2- Four (4) Nieuport 24 of unknown squadrons used by "3rd AIC" at Issoudun. (several versions)
      3- Two (2) Nieuport 24 of of unknown squadrons photographed at Pruniers airfield, Romorantin, France. 
      4- Geezer pilot figure new textures (US Pilot) that I painted to be used with Geezer's "wwiPilotNew3".
      The LODs are adjusted to use JPG textures but I included a folder with the BMPs files for First Eagles 1 users.
      You will find (4) four layout options. The new texture has a "US UNIFORM" as standard layout.
      To use the others with scarfs, you must to exchange the file names:
      -To use the "DARK BLUE" scarf you must to rename 
      OPTIONAL-DARK BLUE-Pilot And Scarf.jpg to Pilot And Scarf.jpg 
      __________________________________________________________________________________________________________
      -To use the "LIGHT BLUE" scarf you must to rename 
      OPTIONAL-LIGHT BLUE-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      -To use the "US FLAG" scarf you must to rename 
      US FLAG-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      -To use the "US UNIFORM" you must to rename 
      US UNIFORM-Pilot And Scarf.jpg to Pilot And Scarf.jpg
      __________________________________________________________________________________________________________
      5- A new cockpit textures in two options (1024x1024 JPG & TGA) & (2048x2048 JPG & TGA).(Included BMP files) for First Eagles 1 users.
      6- New hangar screens (several versions).
      __________________________________________________________________________________________________________
      - The LODs are adjusted to use JPG textures this is only for FE2 users.
      - I painted new textures for the cockpit. I drew a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
      - I'm releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
      - I set the 1024x1024(JPG & TGA) as standard for the planes. 
      - I painted as well, new hangars screens for these planes. The screens are in 1920x1200 size with some options for your choice.
      *OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
      __________________________________________________________________________________________________________
      The aircraft will fly only reconnaissance "RECON" missions.
      Flight model in this pack by peter01 
      __________________________________________________________________________________________________________
      INSTALLATION INSTRUCTIONS:
      FE2 INSTALLATION
      - Drop or copy the folder "Nieuport 24 E" from mine "Aircraft" folder to your "Aircraft" folder. 
      - Drop or copy the folder "US Pilot" from mine "pilots" folder to your "Pilots" folder.
      - Drop or copy the folder "Nieuport 24 E" from mine "decals" folder to your "decals" folder. 
      That's all, you are ready to train at Issoudun.
      __________________________________________________________________________________________________________
      Credits:
      - Julio Junqueira texture skins for aircraft, pilot, cockpit and hangars.
      - EmlD for the excellent Nieuport 3d models.
      - Geezer for the excellent pilot 3d model (wwiPilotNew3) 
      - peter01 for the excellent flight model ini file.
      - Panama Red for the excellent Nieuport 24 cockpit 3d LOD edition. 
      __________________________________________________________________________________________________________
      - Thanks EmlD, Geezer, peter01 and Panama Red for their fantastic work.  
      - Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
      - special thanks to CombatAce.com hosting the files.
      __________________________________________________________________________________________________________
      These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
      __________________________________________________________________________________________________________

      47 downloads

         (0 reviews)

      0 comments

      Submitted

    7. Sopwith Triplane - Dual Gun

      The Sopwith Triplane, also known as the "Tripe" or "Tripehound," was introduced at the end of 1916. By mid 1917, several British and French naval squadrons were equipped with the plane. The narrow chord of the three staggered wings gave the pilot an excellent field of view and gave the plane an exceptional rate of climb as well as outstanding agility. The Triplane was considered an exceptional fighter and stayed in service until replaced by the Sopwith Camel in late 1917. Captured Sopwith Triplanes inspired the development of the more famous Fokker Dr.1.
      My model of the Sopwith Triplane has the smaller tail assembly introduced early in 1917. Earlier planes had a larger tail plane nearly identical to the tail of the Sopwith Pup. Most Triplanes were equipped with a single Vickers machine gun mounted on the fuselage. A small number of Sopwith Triplanes had two guns. This is the two gun version.
      My Sopwith Triplane has a skin, with appropriate decals, for the "Black Flight" of the RNAS 10 squadron. Note - these skins are NOT interchangeable with the skins for my other Sopwith Triplanes. 
      A fully functional cockpit is included, along with my skinning templates. I have included a sound file for the Clerget 130 hp engine, but you may already have it.
      Credits
      Although he's very busy these days, Ojcar found the time to make the FM for this plane. My thanks to him.
      The sound file included with this plane came with Sinbad's series of Sopwith Strutters, so you may already have it. I included it with this download in case you don't.
      Historical Note
      The Black Flight had five planes, each with its name painted at the cockpit. I have added 15 fictitious names in order to complete the decal set.
      Installation Instructions
      For FE1 - Unzip the file and move the folder named "SopwithTripe2Gun" into the FirstEagles/Objects/Aircraft folder.
      My Triplane uses the sound file that came with Sinbad's series of Strutters, so you may already have it. If you don't, copy the file named "RotaryEngineClerget130" from my Sounds folder into your FirstEagles/Sounds folder.
      For FE2 - Unzip the file and move the folder named "SopwithTripe2Gun" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "SopwithTripe2Gun". Move the folder named "D" from the Aircraft/SopwithTripe2Gun folder into the Decals/SopwithTripe2Gun folder you just made.
      My Triplane uses the sound file that came with Sinbad's series of Strutters, so you may already have it. If you don't, copy the file named "RotaryEngineClerget130" from my Sounds folder into your FirstEagles/Sounds folder.

      123 downloads

         (1 review)

      0 comments

      Submitted

    8. Sopwith Triplane - Early

      The Sopwith Triplane, also known as the "Tripe" or "Tripehound," was introduced at the end of 1916. By mid 1917, several British and French naval squadrons were equipped with the plane. The narrow chord of the three staggered wings gave the pilot an excellent field of view and gave the plane an exceptional rate of climb as well as outstanding agility. The Triplane was considered an exceptional fighter and stayed in service until replaced by the Sopwith Camel in late 1917. Captured Sopwith Triplanes inspired the development of the more famous Fokker Dr.1.
      The first planes produced had a tail plane nearly identical to the tail of the Sopwith Pup. Early planes also had a 110hp Clerget engine. A smaller tail plane was introduced early in 1917. The engine was also replaced with a more powerful 130hp Clerget engine.  
      This is an early version of the Sopwith Triplane with a wider tail and lower powered engine. It has two skins, one French and one British, with appropriate decals. Note - these skins are NOT interchangeable with the skins for my other Sopwith Triplanes. 
      A fully functional cockpit is included, along with my skinning templates. I have included a sound file for the Clerget engine, but you may already have it. 
      Credits
      Although he's very busy these days, Ojcar found the time to make the FM for the early Sopwith Triplane. My thanks to him.
      I have included a sound file for the Clerget engine created by Nixou. It has been used on other planes, so you may already have it. I included it with this download in case you don't.
      Historical Note
      The 110 hp Clerget engine was the 9Z. I don't have a sound file for the 9Z so I used a sound for the Clerget 9B instead.
      Installation Instructions
      For FE1 - Unzip the file and move the folder named "SopwithTriplane" into the FirstEagles/Objects/Aircraft folder.
      I have included Nixou's sound for the Clerget engine. It has been used with other planes, so you may already have it. If you don't, copy the file named "clerget9b2m2" from my Sounds folder into your FirstEagles/Sounds folder.
      For FE2 - Unzip the file and move the folder named "SopwithTriplane" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "SopwithTriplane". Move the folder named "D" from the Aircraft/SopwithTriplane folder into the Decals/SopwithTriplane folder you just made.
      I have included Nixou's sound for the Clerget engine. It has been used with other planes, so you may already have it. If you don't, copy the file named "clerget9b2m2" from my Sounds folder into your FirstEagles/Sounds folder.

      102 downloads

         (1 review)

      0 comments

      Submitted

    9. Sopwith Triplane

      The Sopwith Triplane, also known as the "Tripe" or "Tripehound," was introduced at the end of 1916. By mid 1917, several British and French naval squadrons were equipped with the plane. The narrow chord of the three staggered wings gave the pilot an excellent field of view and gave the plane an exceptional rate of climb as well as outstanding agility. The Triplane was considered an exceptional fighter and stayed in service until replaced by the Sopwith Camel in late 1917. Captured Sopwith Triplanes inspired the development of the more famous Fokker Dr.1.
      My model of the Sopwith Triplane has the smaller tail assembly introduced early in 1917. Earlier planes had a larger tail plane nearly identical to the tail of the Sopwith Pup. My plane is equipped with a single Vickers machine gun mounted on the fuselage. A small number of Sopwith Triplanes had two guns.
      My Sopwith Triplane has two skins, one French and one British, with appropriate decals. A fully functional cockpit is included, along with my skinning templates. I have included a sound file for the Clerget 130 hp engine, but you may already have it.
      Credits
      Although he's very busy these days, Ojcar found the time to make the FM. My thanks to him.
      The sound file included with this plane came with Sinbad's series of Sopwith Strutters, so you may already have it. I included it with this download in case you don't.
      Installation Instructions
      For FE1 - Unzip the file and move the folder named "SopwithTriplane" into the FirstEagles/Objects/Aircraft folder.
      My Triplane uses the sound file that came with Sinbad's series of Strutters, so you may already have it. If you don't, copy the file named "RotaryEngineClerget130" from my Sounds folder into your FirstEagles/Sounds folder.
      For FE2 - Unzip the file and move the folder named "SopwithTriplane" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "SopwithTriplane". Move the folder named "D" from the Aircraft/SopwithTriplane folder into the Decals/SopwithTriplane folder you just made.
      My Triplane uses the sound file that came with Sinbad's series of Strutters, so you may already have it. If you don't, copy the file named "RotaryEngineClerget130" from my Sounds folder into your FirstEagles/Sounds folder.

      164 downloads

         (4 reviews)

      3 comments

      Submitted

    10. Halberstadt CL.II

      The Halberstadt CL.II was a German, 2 seat fighter/escort plane. The CL.II was designed to be an escort for reconnaissance flights. Its excellent maneuverability made it a match for single seat fighters and its field of fire made it an excellent ground attack plane. It entered service in August 1917 and was used in large numbers until the end of the war.
      The Halberstadt CL.II had a plywood fuselage and was powered by a six-cylinder Mercedes D.III engine. It had a 7.92mm Spandau machine gun in the front fuselage for the pilot and a 7.92mm Parabellum gun on a ring mount for the observer. It could also carry a light bomb load. My version has a rack for 10 stick grenades mounted on the fuselage.
      My download includes a hex camo skin, appropriate decals, and a fully functional cockpit. My skinning templates are included with the download.
      I have included a sound file for the Mercedes D.III engine. The same sound has been used with other planes and you may already have it installed. I have included the sound file with the download in case you don't have it.

      Credits
      My thanks to Ojcar for making the data file for the Halberstadt CL.II and for making improvements to the guns.
      My thanks to Nixou for making the sound file for the Mercedes engine many years ago.

      Installation Instructions
      For FE1 - Unzip the file and move the folder named "HalberstadtCL2" into your FirstEagles/Objects/Aircraft folder.
      If you don't already have it, move the sound file "mercedes160m2.wav" from my "Sounds" into your "Sounds" folder. 

      For FE2 - Unzip the file and move the folder named "HalberstadtCL2" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "HalberstadtCL2." Move the folder named "D" from the Aircraft/HalberstadtCL2 folder into the Decals/HalberstadtCL2 folder you just made. 
      If you don't already have it, move the sound file "mercedes160m2.wav" from my "Sounds" into your "Sounds" folder. If you don't have a Sounds folder, you can make one.

      178 downloads

         (2 reviews)

      0 comments

      Submitted

    11. SAML S.2

      The SAML S.2 was an improved version of the Aviatik B.I which was built under license by the Societá Anonima Meccanica Lombarda (known as the SAML S.1.) The S.2 was specifically designed to fly in the mountainous terrain of the Italian Front. Improvements mostly involved the wings, which had a slight sweep and were closer together than the Aviatik design. The biggest improvement was the more powerful Fiat A.12 engine capable of delivering 300hp.
      The SAML S.2 was used primarily for reconnaissance and was armed with a fixed Fiat-Revelli machine gun over the wing with a ring mounted machine gun operated by the observer.
      My SAML S.2 includes 2 skins with appropriate decals and a small bomb loadout. I have included my skinning templates with the download.
      Version 2 - More accurate fuselage and gunner station, corrected wing placement and dihedral, corrected gauges in cockpit - all new LODs, revised skins, revised FM, new cockpit LOD and revised cockpit.ini
      Credits:
      My thanks to Ojcar for making the data.ini file for this plane and for providing valuable resources and advice on the details of the SAML S.2.

      Installation instructions:
      For FE1: Unzip the file and move the folder named "SAMLS2" into the FirstEagles/Objects/Aircraft folder. 
      For FE2: Unzip the file and move the folder named "SAMLS2" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SAMLS2". Move the folder named "D" from the Aircraft/SAMLS2 folder into the Decals/SAMLS2 folder you just made. 
       

      178 downloads

         (1 review)

      2 comments

      Updated

    12. Pomilio PE

      The Pomilio PE was a two seat, Italian general purpose plane that entered service in 1917. It had a 300hp Fiat 6 cylinder engine with a radiator mounted in the nose of the aircraft. A fin under the fuselage, around the tail skid, helped improve the stability of the plane.
      The Pomilio PE was used primarily for reconnaissance and was armed with a fixed Fiat-Revelli machine gun over the wing with a ring mounted machine gun operated by the observer. The Pomilio could carry a light bomb load with 3 bombs mounted on the each side of the plane.
      My Pomilio PE includes 2 skins - a green/yellow speckled camo, and a 3 color camo - each with appropriate decals. I have included a small bomb loadout. I have included my skinning templates with the download.
      Historical Notes:
      - My Pomilio PE uses the later style fuselage with a flatter deck behind the pilot because it allowed me to give greater range to the gunner in the game.
      - I have taken extensive liberties with the speckled camo skin version of the plane. When the camouflage was applied at the factory, it usually covered the metal panels around the engine. The speckled camo scheme was not applied to the top of the lower wing. The national insignia on the top wing did not usually extend into the aileron. The 3 color camo version is much more accurate and is the default skin. 
      Credits:
      My thanks to Ojcar for making the data.ini file for this plane.
      Installation instructions:
      For FE1: Unzip the file and move the folder named "PomilioPE" into the FirstEagles/Objects/Aircraft folder. 
      For FE2: Unzip the file and move the folder named "PomilioPE" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "PomilioPE". Move the folder named "D" from the Aircraft/PomilioPE folder into the Decals/PomilioPE folder you just made. 

      148 downloads

         (2 reviews)

      0 comments

      Submitted

    13. nieuport 17

      nieuport 17 model in 3dsmax

      53 downloads

         (0 reviews)

      1 comment

      Submitted

    14. Aviatik-Berg D.I (Early)

      Designed by Julius von Berg for the Aviatik company, the D.I was the first fighter completely built in Austria. The Berg was light and maneuverable, and after structural problems in the early models were overcome, it became a good combat plane.
       
      Early versions of the plane had the two Schwarzlose machine guns mounted low on each side of the engine. This is the early version of the plane. This download includes a new cockpit as well as a modified fuselage. Ojcar has made a completely new FM to reflect the different flight characteristics of this plane.
       
      I have included a basic skin and my skinning templates. I highly recommend the skins made by Quack74, available at CombatACE as a separate download. This plane has an extra piece that was not included in Quack's skins, I have included a skin to match Quack's skins which you will need to add to each skin folder.
       
      Credits
      My thanks to Ojcar for making the FM. And thanks to Nix for making the engine sound file.
       
      Installation Instructions
       
      For FE1 - Unzip the file and move the folder named "AviatikD1_Early" into the "Aircraft" folder in the FirstEagles/Objects folder. This file uses the same sound file as the original AviatikD1. If you did not install that plane then you will also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
       
      For FE2 - Unzip the file and move the folder named "AviatikD1_Early" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AviatikD1_Early". Move the folder named "D" from the Aircraft/AviatikD1_Early folder into the Decals/AviatikD1_Early folder you just made. This file uses the same sound file as the original AviatikD1. If you did not install that plane then you will also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.

      465 downloads

         (3 reviews)

      0 comments

      Updated

    15. Aviatik-Berg D.I

      Aviatik-Berg D.IDesigned by Julius von Berg for the Aviatik company, the D.I was the first fighter completely built in Austria. The Berg was light and maneuverable, and after structural problems in the early models were overcome, it became a good combat plane.
       
      Although nimble, reasonably fast, and able to reach higher altitudes than many of the planes it fought, the Aviatik D.I was prone to overheating. Many pilots flew with the engine cover panels removed, so I built this plane without the engine cover.
       
      Early versions of the plane had the two Schwarzlose machine guns mounted low on each side of the engine. Later versions put the guns higher and within reach of the pilot to make it easier to clear jammed guns. This is a later version with the guns firing through tubes under the manifolds and projecting through the radiator.
       
      I have included a basic skin along with my skinning templates. I highly recommend the skins made by Quack74, available at CombatACE as a separate download.
       
      Revision 1 - June 12, 2011It appears that I made the original about 20% too large. I have rescaled the plane to the correct size, this involved making some changes in and around the cockpit. Since I was revising the cockpit, I put the correct guns in this version (Schartzlose instead of Spandau.) I have also included the FM written by ojcar, and the sound for the Austro-Daimler engine made by Nix.This version includes all new LODs, new data file, new cockpit ini, and new decal ini. If you have downloaded the previous version, it would be easiest to just delete the whole folder and replace it with this version.
       
      Revision 2 - September 20, 2011I have added a complete set of letter decals so you can set a flight letter in the Loadout screen, or the game will randomly assign a different letter to each plane. There will also be a different serial number randomly assigned to each plane as well.
       
      Revision 3 - June 5, 2012I have made slight changes to the model, especially in the rigging. This revision has all new LODs. Ojcar has made changes to the FM to work with the new model. All the decals are the same as before.
       
      Installation Instructions - New install
       
      For FE1 - Unzip the file and move the folder named "AviatikD1" into the "Aircraft" folder in the FirstEagles/Objects folder. You also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
       
      For FE2 - Unzip the file and move the folder named "AviatikD1" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AviatikD1". Move the folder named "D" from the Aircraft/AviatikD1 folder into the Decals/AviatikD1 folder you just made.You also need to move the sound file "Austro-daimler200.wav" into the FirstEagles/Sounds folder.
       
      Installation Instructions - Update existing install
       
      For both FE1 and FE2 - Delete the following files and replace them with the new versions: All the LOD files and OUT files - you are deleting three of each and replacing them with four of each. The OUT files are optional and not necessary for the game. AviatikD1.ini - the new one makes use of the extra LOD.AviatikD1_DATA.INI - The new one uses the new rigging and is slightly more compact than the original.Everything else is the same as in the Revision 2 download.

      707 downloads

         (5 reviews)

      1 comment

      Updated

    16. Anatra C.I

      This version includes a new FM made by ojcar.
      When the Ukrainian city of Odessa was occupied by Austria-Hungary early in 1918, the Anatra factory was found intact and production of the Anatra DS was continued as the "Anatra C.I". Many of the first Austrian versions had the Austrian cross painted over the Russian insignia.
      The Anatra C.I was used mostly for training, but some were used for reconnaissance, as a fighter and light bomber. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
      In version 2 - I have created a separate version for the Austrian plane, with a Schwarzlose machine gun and German bombs in the loadout. There are two Austrian skins, one with crosses painted over the Russian roundels, and one with standard insignia. (I have also included a postwar Yugoslav skin, because I like the insignia.) I have included my skinning templates for those who want make their own skins.
      In version 3 - Ojcar has made a new FM for the plane. I have refined the wings and added some details. I created a new cockpit with German gauges and machine gun. I made two Austrian skins for the plane and I kept the Yugoslav skin, because I like the insignia. I have included my skinning templates for those who want make their own skins.
      Historical Notes:
      The serial numbers are fictitious. I found several sources which said that Anatras carried a machine gun mounted on the fuselage for the pilot. I couldn't find any details of the mounting, so I guessed where it might be located.
      Credits:
      My thanks to Ojcar once again for making a new data.ini file for this plane.
      Installation instructions:
      This revision replaces previous versions. If you have an older version, please delete it, then install the new version.
      For FE1: Unzip the file and move the folder named "AnatraC1" into the FirstEagles/Objects/Aircraft folder. 
      For FE2: Unzip the file and move the folder named "AnatraC1" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AnatraC1". Move the folder named "D" from the Aircraft/AnatraC1 folder into the Decals/AnatraC1 folder you just made. 
       

      309 downloads

         (1 review)

      2 comments

      Updated

    17. Anatra DS "Anasal"

      This version includes a new FM made by ojcar.
      The Anatra DS was a two seat Russian plane powered by a Salmson 9 cylinder, water cooled, radial engine. The plane was therefore called the "Anasal", short for "Anatra Salmson". When the Ukrainian city of Odessa was occupied by Austria-Hungary early in 1918, the Anatra factory was found intact and production continued as the "Anatra C.I". Many of the first Austrian versions had the Austrian cross painted over the Russian insignia.
      The Anatra was used mostly for reconnaissance, but also as a fighter and light bomber. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
      In version 2 - I have included a loadout for a light bomb load and three skinning options - A generic Russian skin, and skins for two Russian squadrons - the 19th and the 4th squadrons with decals for the squadron tail markings. I have included my skinning templates for those who want make their own skins.
      In version 3 - I improved the details around the nose, completely reskinned the plane and cockpit, and corrected several problems with node names in the data file. New templates are included in the version 3 download.
      In version 4 - Ojcar has made a new FM for the plane. I have refined the wings and added some details. Old skins will still work with this revision. I have included the old skinning templates with the download.
      Historical Notes:
      I found several sources which said that Anatras carried a machine gun mounted on the fuselage for the pilot. I couldn't find any details of the mounting, so I guessed where it might be located.
      Credits:
      My thanks to Ojcar once again for making a new data.ini file for this revision of the plane.
      Installation instructions:
      This revision replaces previous versions. If you have an older version, please delete it, then install the new version.
      For FE1: Unzip the file and move the folder named "AnatraDS" into the FirstEagles/Objects/Aircraft folder. 
      For FE2: Unzip the file and move the folder named "AnatraDS" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AnatraDS". Move the folder named "D" from the Aircraft/AnatraDS folder into the Decals/AnatraDS folder you just made. 
       

      422 downloads

         (1 review)

      3 comments

      Updated

    18. Polish Anatra DS "Anasal"

      The Anatra DS was a two seat Russian plane powered by a Salmson 9 cylinder, water cooled, rotary engine. The plane was therefore called the "Anasal", short for "Anatra Salmson". When the Ukrainian city of Odessa was occupied by Austria-Hungary early in 1918, the Anatra factory was found intact and production continued as the "Anatra C.I". Many of the first Austrian versions had the Austrian cross painted over the Russian insignia.
      The Anatra DS was used mostly for reconnaissance, but also as a fighter and light bomber. Many of them survived the war and were used in the fighting in Eastern Europe after the end of World War I.
      Poland declared its independence in late 1917. The new nation armed itself with whatever was available,  including abandoned Russian, German and Austrian planes, and purchased planes from other nations. Several Anatra DS were purchased from the Anatra factory in Odessa.
      The Polish Anantra DS was identical to the Russian version, except for slight changes to the cowling, the radiator, and the rudder. The skins to my plane are similar, but not identical to my Russian version. As a resullt, I have included new skinning templates for the Polish Anasal.

      Historical Notes:
      I found several sources which said that Anatras carried a machine gun mounted on the fuselage for the pilot. I couldn't find any details of the mounting, so I guessed where it might be located. 
      I don't know how the Poles armed their plane, so I used the guns I used on the Russian version. I also included a small bomb load.

      Credits:
      My thanks to Ojcar once again for making a new data.ini file for this plane.

      Installation instructions:
      For FE1: Unzip the file and move the folder named "PolishAnasal" into the FirstEagles/Objects/Aircraft folder. 
      For FE2: Unzip the file and move the folder named "PolishAnasal" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "PolishAnasal". Move the folder named "D" from the Aircraft/PolishAnasal folder into the Decals/PolishAnasal folder you just made. 

      64 downloads

         (3 reviews)

      0 comments

      Submitted

    19. Sikorsky S-16 Flatdeck

      Several versions of the S-16 were produced with slight variations in the fuselage and wing configurations. This version has a flat deck behind the pilot and ailerons on both wings. It is based on my earlier versions of the Sikorsky S-16, but is a completely new plane.
      The download includes 4 skins - 3 linen and one green - with appropriate decals. This plane has a fully functional cockpit. I have included my skinning templates so others can make new skins if they want.

      Credits
      My thanks to ojcar, who made the FM for the Sikorsky S-16.
      My thanks also to Nixou, who recorded the sound for the Gnome 80hp engine.

      Version 2 Notes 
      I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.
      Version 3 Notes
      This is a completely new plane with new LODs, skins, and cockpit. This version has higher detail and a lower poly count than the previous version. This model also includes better detail for battle damage to the wings.

      Installation instructions
      This is a completely new plane, if you have already installed the Sikorsky S-16 flatdeck, delete it, including the decals, and replace it with this version. The sound file remains the same.

      For FE1 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. If you have the previous version, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

      For FE2 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16_var".  Move the folder named "D" from the Aircraft/SikorskyS16_var folder into the Decals/SikorskyS16_var folder you just made.
      If you have the previous version of the Sikorsky, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

      419 downloads

         (2 reviews)

      0 comments

      Updated

    20. Siemens-Schuckert D.I

      The German Siemens-Schuckert D.I was a direct copy of captured Nieuport 17s. The most important difference was in the engine. The Siemens Schuckert Werke (SSW) D.I used a geared Siemens-Halske Sh.I engine which produced 1800rpm. The spinner nose and open bottom cowling were necessary to help cool the engine. A bigger prop required a taller landing gear.
      Problems with engine production delayed the release of the SSW D.I. The Albatros D.III was already available by the time the SSW reached the front. The Albatros was a much superior plane, and was less likely to be mistaken for a French plane. The SSW D.I only served for a short time on the Western Front, they served longer on the Eastern front.
      My Siemens-Schuckert D.I includes a three color camo skin, a full set of number decals, a fully functional cockpit, and damage nodes for the wings. My skinning templates and a sound file for the engine are included in the download.

      Historical Notes:
      I do not have a sound file for the Siemens-Halske Sh.I engine, I am using Nixou's sound for the Le Rhône 110 hp engine instead.

      Credits:
      My thanks to Ojcar once again for making the excellent data.ini file for this plane.
      My thanks to Nixou for making the sound file for the Le Rhône 110 hp engine.

      Installation instructions:
      For FE1: Unzip the file and move the folder named "SiemensSchuckertD1" into the FirstEagles/Objects/Aircraft folder. If you don't already have it, move the file named "Lerhone110m1" from my Sounds folder into your Sounds folder.
      For FE2: Unzip the file and move the folder named "SiemensSchuckertD1" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SiemensSchuckertD1". Move the folder named "D" from the Aircraft/SiemensSchuckertD1 folder into the Decals/SiemensSchuckertD1 folder you just made. If you don't already have it, move the file named "Lerhone110m1" from my Sounds folder into your Sounds folder.
       

      155 downloads

         (5 reviews)

      0 comments

      Submitted

    21. Sikorsky S-16

      The S-16 was designed by Igor Sikorsky as fighter escort for bombers and was the first Russian-built aircraft with a synchronized machine gun. The plane was small and highly maneuverable, but had a smaller engine than intended and was outclassed by German aircraft of the time.
      The dual axle landing gear was designed for landings on rough ground. Several versions of the S-16 were produced with variations in engines and wing configurations. Relatively few S-16s were produced, but were used throughout the war and in the Russian Civil War.
      This plane carries the markings of the Eskadra Vozdushnykh Korablei (Squadron of Air Ships), the world's first strategic bomber group.
      I have included four skins, several plain linen, and one gray-green. I have included my skinning templates so others can make new skins if they want. 
      Credits
      And my thanks to ojcar, who created the FM to reproduce the nimble characteristics of the plane.
      My thanks to Nix, who provided the sound for the Gnome 80hp engine (and revised it until I was happy.)

      Historical Notes
      The Russian Banner with the yellow square and two-headed eagle was the imperial banner and was not used on aircraft, but the replica in Connecticut uses it, so I used it on mine. The gray-green version uses a more accurate fuselage marking. If historical accuracy is important to you, change the decals.ini for texture set 1 to use "EVKBanner" instead of "ImperialBanner".
      Wings Palette shows the gray-green plane with a red triangle on the fuselage. I believe this was a Bolshevik plane in which red was painted over the standard Russian markings. I used the standard markings on mine.

      Version 2 Notes 
      I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.

      Version 3 Notes 
      I have made all new LODs, with higher detail and lower poly count, and with all new skins. Ojcar has made a new FM for this plane. 

      Installation instructions
      This is a completely new plane, if you have already installed the Sikorsky S-16, delete it and replace it with this version, including the decals. The sound file remains the same.
      For FE1 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
      For FE2 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16".  Move the folder named "D" from the Aircraft/SikorskyS16 folder into the Decals/SikorskyS16 folder you just made. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

      483 downloads

         (4 reviews)

      0 comments

      Updated

    22. Lebed 7

      The Lebed 7 was a Russian copy of the British Sopwith Tabloid. It was produced in 1915 and was intended to be used as a fighter. But with an 80hp Gnome engine and wing warping controls, it was quickly outclassed and was used primarily for recon and later for training.
       
      The Lebed 7 was shipped from the factory unarmed. The British plane had a machine gun mounted on the upper wing, so it isn't unreasonable to think that a Russian pilot might have tried mounting a gun on his plane. I have made a (possibly fictitious) version of the plane with a Lewis gun mounted on the top wing. 
      My Lebed 7 has a fully functional cockpit, three skins - a grey paint and two clear doped linen, and a full set of number decals. My skinning templates are included.
      The plane comes with a helmeted Russian pilot; instructions for installing the pilot are included. Or you can change the data.ini to use one of the stock FE pilots.
      Many years ago Nixou recorded a a large number of sounds for First Eagles. I have included the sound file for the 80 hp Gnome Monosoupape engine, but you may already have it.

      Credits
      Thanks to Ojcar for making the data file for the Lebed 7.
      Thanks to Nixou for making the sound file for the Gnome 80 hp engine.

      Installation Instructions
      For FE1 - Unzip the file. Move the folder named "Lebed7" into your FirstEagles/Objects/Aircraft folder. 
      For FE2 - Unzip the file. Move the folder named "Lebed7" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "Lebed7". Move the folder named "D" from your Aircraft/Lebed7 folder into the Decals/Lebed7 folder you just made. 

      In case you don't already have it, I have included the sound file for the 80 hp Gnome engine. Move the file named "gnome80m4.wav" from my Sounds folder into your Sounds folder.
      You may not need to install the pilot with helmet, it has been available for download for some time and has been included with other planes. In case you don't already have it, I have included the pilot and instructions for installing it in a separate folder included in this download.
       

      105 downloads

         (1 review)

      1 comment

      Submitted

    23. New Loadout for DFW C.V stock airplane

      Hi FE Flyers!
      Here is new loadout for the stock DFW C.V airplane.
       More precisely:
      - 4 x PuW_12.5kg (about 50kg, this is stock bomb armament)
      16 x PuW_12.5kg (about 200kg, new type of armament, made by me)
      ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
      --To install this mod, extract "DFWC5_Loadout.ini" and "DFWC5_Data.ini" files from "Loadout" folder to your "DFWC5" folder (Probably, this folder is here: C:/Program Files/ThirdWire/WWI/Objects/Aircraft )

      --To uninstall, just delete the files.
       
      Happy Flying!
      Jackson M.
       

      50 downloads

         (0 reviews)

      0 comments

      Updated

    24. Taube (grenade armed)

      This version of the Taube is armed with a handful of grenades instead of a rifle. many thanks to all the people who worked on the original Taube and a special thanks to Stephen1918 who was kind enough to make time to alter his model to remove the gunner.All work on this is really the efforts of others and my only contribution was to bundle it up. Any issues please direct to me and I'll do my best to fix them as soon as I can.

      97 downloads

         (2 reviews)

      6 comments

      Updated

    25. Taube

      There were many versions of the Taube produced in the years leading up to World War I. When the war began different versions were being used in large numbers, on all fronts for recon missions. This is the Kondor Taube, which I think is representive of the "classic" Taube. It has the typical wing shape, uses wing warping for both the aileron and elevator surfaces, and has a six cylinder 100HP engine.
       
      I have added a rifle for the observer, which he will aim and fire. I have made significant changes to the wires on the front to give the gunner more room to move.
       
      Ojcar has created a fake machine gun for the pilot, which causes the AI plane to be more aggressive in pursuing enemy planes. I have installed that gun on this plane. Ojcar's "DummyMachineGun" data is included with this download, in case you don't already have it.
       
      Some flyers wore simple crash helmets in WWI, especially in the early days. I am using a pilot with a helmet in this plane. The pilot and installation instructions are included in the download, in case you don't already have it.
       
      The download includes my skinning templates, data for the guns and the German pilot with helmet.
       
      Credits
      Thanks to Ojcar for making the data file for the Taube, and for greatly improving the gunner. Ojcar also made the data for the dummy machine gun.
      Thanks to Crawford for identifying a problem with the elevators.
       
      Installation Instructions
      For FE1 - Unzip the file. Move the folder named "Taube" into your FirstEagles/Objects/Aircraft folder.
       
      For FE2 - Unzip the file. Move the folder named "Taube" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "Taube". Move the folder named "D" from your Aircraft/Taube folder into the Decals/Taube folder you just made.
       
       
       
      You may not need to install the dummy machine gun, it has been used on other planes and you may already have it. If you don't already have it, I have included the gun and instructions for installing in a separate folder included in this download.
       
      You may not need to install the infantry, it has been used on ground units and you may already have it. If you don't already have it, I have included the gun and instructions for installing in a separate folder included in this download.
       
      You may not need to install the pilot with helmet, it has been available for download for some time and you may already have it. If you don't already have it, I have included the pilot and instructions for installing in a separate folder included in this download.

      185 downloads

         (10 reviews)

      6 comments

      Updated

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..