12 May 2011
 
Syrian Su-22 and Libyan Su-22M3 Ground Attack for
Strike Fighters 2: Israel
 
Su-22M3 Export variant Su-17M3 with MiG-23BN Engine.
Su-17M/Su-22M/Su-22M3 was the most numerous variant
with almost 1,000 built. Syria has about 50 Su-22's.
Lybia has about 36 Sukhoi Su-22M3/UM-3K's.
 
All files needed are included.
 
To Install:
Just drop files into The Strike Fighters 2: Israel
User Directory. Can be used in other mods.
 
Fixed Aircrafts left roll problem.
Other adjustments to Data.ini.
Changed the Name to Su-22 "Fitter-F"
 
I want to thank the Community for all their effort.
and:
 
AmokFloo Su-17M Model & Skin.
Armourdave, Sal Cockpit.
Gepard Original Desert Skin.
ravenclaw_007 PTB-800 Drop Tank & SPS-141 ECM-Pod.
ravenclaw_007 SU-7 SPS-141 ECM Pod.
Spectre8750 Repaint for Syria & Decals.
Matt Ouellette for original Hungarian skin used for
Lybia.
Spillone104 Sounds.
The Trooper Red3203 Pilot
AleDucat Zvezda K-36D Ejector Seat.
MGunny Ordnance Shop II.
 
add to Squadronlist.ini:
 
[squadronxxx] <---Change xxx's to next in sequence.
Name=Lib81st4th
DisplayName=Libyan 81st BS 4th BW
Nation=Libya
 
[squadronxxx]
Name=Sy677thSquad
DisplayName=Syrian No. 677 Squadron
Nation=Syria
 
 
 
Thanks to all, let me know if i missed anyone.
 
Spectre8750 at gmail.com

Bf109g-6AS, JG 1, Germany, Early 1945.
 
In April 1944, JG 1 became the first unit to be equipped with the new Bf109g-5/AS and -6/AS with its uprated DB605AS engine. This entailed the introduction of a new streamlined cowling, compared to the original bulged model used on standard G-5 and G-6 aircraft. As the AS series were intended for high altitude operations, the initial production run were finished in overall RLM 76 pale blue-grey.
 
Jagdgeschwader 1 was based in Northern Germany on Reich Defence duties (Stab was based at Paderborn) and was commanded at this time by Oberstleutnant Walter 'Gulle' Oesau, whose Green 13 is included in this pack. He was killed on 11th May 1944 over St Vith by P-38s of the USAAF.
 
You will need the AvHistory Guns pack installed.
 
For SF2 only.
 
Credits:
 
Visual model, flight dynamics and original skin template: Monty_CZ
Cockpit including original paintwork: Kesselbrut
Skin, decals, partial cockpit repaint, ini tweaks and loading screen: ndicki

JASDF Mitsubishi T-2 Trainer For SF2
For SF2 (may require SF2E or I for some of the HUD bits)
 
As stated above, due to the use of pointers to the F-15A HUD markers, this may best be used in a Full-4 Merged install, or at the very least, those with SF2:E.
 
This is a mods package of Veltro2K's JASDF advanced trainer, to bring it into SF2. This is the complete aircrft package, containing everything needed to unzip and install. Most of the mods are to the various inis, and new serial number decals. Otherwise, it is the complete pack as Veltro released it (just slightly tweekificated).
 
The data ini has also had some minor mods; mostly in engine thrust, weight, etc. The FM is not perfect, but it handles just fine for me on Normal flight mode. A userlist is supplied, even though these are Japanese-only aircarft; not built for export. Weither that makes a difference for not, don't know! But, it IS locked into a 'nationalized' usage. Also, my first attempt at a DDS damage texture -- please don't laugh too hard at it <grin>!! A new SF2-style hangar screen is also included.
 
Loadouts have been adjusted, leaning slightly more for the attack/strike role than the Real Life ™ aircraft. In this respect, its more like the fighter-trainer version (FT-2B??) than the pure trainer. Most of the weapons used are stock in-game items, although one or 2 used (in particular the JM117-GSC1 EO bomb) are availble in the Mistubishi F-1 upgrade, to be found at the following url:
 
http://combatace.com/files/file/11175-jasdf-mitsubishi-f-1-for-sf2/
 
(however, this weapon is only avaliable after 1977; before that you'll get standard US EOGBs)
 
All serial number decals ARE the actual ones as used; The info sheet in the Burindo book is/was a little vague and as I can't read Japanese... As is what I believe to be the 4 Hikotai tail badge; although it does look good!
 
As always, READ the enclosed readme for full, highly detailed, step-by-step install instructions. This package is set up for a 'drag and drop' style of installation -- everything has been divided into the proper folder format that SF2 needs/wants/requires. Of course, the usual "Notes" section for other important stuff; might want to read it, eh?
 
Happy Landings!
Wrench
kevin stein

Royal Navy Skyraider Mk.1 (What If...)
 
= For SF2 (Full-4 Merged) or SF2:V ONLY!!!- =
 
As stated above, you MUST have a Full-4 merged, or at the VERY LEAST!! SF2:V to make use of this mod, as it accesses the A-1H lod from SF2:V. All other parts are supplied herein (except the engine sound and the centerline droptank; they're included the A-1H/A-1J updates, which you should have. If not, what's stopping you? They're available at the following URLs:
 
http://combatace.com/files/file/11249-3rdw-a-1h-skin-and-ini-update-pak/
http://combatace.com/files/file/11252-3rdw-a-1j-skyraider-skins-and-ini-update-pak/
 
Yes, shamless self-promotion <grin>) Other than the aformentioned, this is a complete, new aircraft for Royal Navy usage.
 
This is a complete update of the "What If..." RN Skyraider I released in 2005. The aircraft has 3 sets of skins (created from a HomeGrown ™ template with redrawn panel and rivet lines and etcs). The skins cover:
 
830 NAS, in dark gray/white during the 1950s (includes Suez War 'Invasion Stripe' decals)
813 NAS, in dark gray/white for other 1950s/early 60s usage (no stripes)
814 NAS, in sea blue/white during the 1960/70s
 
All decals from the original pak have been reused, as everyone knows how I hate to waste good decals <grin>. Like my other USN Skyraider mods, this has a working canopy (use shift/0 to open and close), and corrected light positions, including a landing light. A new SF2-style hangar screen, and a short historical essay are included.
 
As always, =READ= the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs, to make it a LOT easier to install.
 
Good Hunting!
Wrench
kevin stein

05-07-2011
 
F-16AM "Fighting Falcon"(20) w/Jordan 2 Squadron Digital MARPAT Skin.
Also Known in HyperStealth’s advanced digital KA2 camouflage pattern
created for Jordan.
 
For any Strike Fighters 2 Israel or Combo Pack Series.
 
======================================================================
 
Install:
Drop straight into "StrikeFighters2 Israel" Directory. Overwrite when
asked.
If You want the Years for this Aircraft to be available You'll have to
edit the ISRAELME.INI files AllowedDates and drop it in the "Terrains\
IsraelME" Directory under the "StrikeFighters2 Israel" Folder.
Also add to SQUADRONLIST.INI below and replace xxx with next sequence.
 
[squadronxxx]
Name=2Squadron
DisplayName=Jordanian 2nd Squadron
Nation=Jordan
 
======================================================================
 
Included:
Aircraft INI's, Screens, Weapons, Pilot and Effects.
2011 Jordan KA2 and 1997 to pre 2011 Skin.
 
Thanks Go To:
TK and Crew for the F-16A Netz.
Thanks Gerwin for The Skin template for the F-16A Netz.
Also MGunny's Ordnance Weapons.
AleDucat's Boeing ACES II Ejector Seat.
Let me know if i missed anyone.
 
Have Fun
 
Spectre8750

MDD F-4K Phantom (FG.1) Royal Navy/Royal Air Force
 
-- For SF2, Full-4 Merged (Prefered) and/or SF2:E ONLY!!! --
 
As stated above, you =MUST= have either a Full-4 Merged install, or at the VERY LEAST SF2:E to make use of this mod package, as it references all stock items for the aircraft and cockpit that are =ONLY= found in SF2E or Full4 Merged game installs; is uses the F-4M lods for the aircraft and cockpit, as well as the various other inis. Some, however, ARE supplied, as I made adjustments and so forth.
 
This package represents F-4K/FG.1 Phantoms of the Royal Navy Fleet Air Arm, and later as serving in the RAF
 
Skins and decals in the pak are for:
 
767 Squadron, FAA (?Land based in UK and The Continent?)*
892 Squadron, FAA (aboard HMS Ark Royal)*
"Generic" RAF Camo (stock skin; uses stock decals for 19 Squadron)
111 Squadron RAF (Barley Gray)**
 
*Skins and decals were created by Sundowner some years ago
 
**maybe non-historical; it's possible that 111 used FG.1s upgraded to FG.2, with addition of the RWR 'box' on fin. But the skin is too nice to let go!
 
All weapons used are stock in-game items. Minor data ini edits allow for carrier useage, and a maunaly operated canopy. Use Shift/0 to open and close. A new artwork loading screen is also included.
Remember: this is the early model, withOUT the ECM/RWR fairings on the tail, and no RWR of any kind!! So watch you be-hinds!!
 
As always, READ the enclosed readme for full, detailed instructions. This package has been broken down into the various folders that SF2 needs/requires/should have, to make it a LOT easier to install.
 
Catch a 3 Wire!
Wrench
Kevin Stein

Lockheed F-104B Starfighter for Strike Fighters 2
 
The F-104B was the trainer version of the F-104A interceptor.It has been used by the Air Forces of the US, Pakistan, Jordan and Taiwan.
 
-------------------------------------------------------------------------------------------------------------------
 
This mod is intended as a general update of the F-104B model of Ajunaidr released some years ago.
The FM is improved and now there are a new ogival nose, pitot and other details added via "fake pilot".
 
-------------------------------------------------------------------------------------------------------------------
 
IMPORTANT!!!
You need SF2E to have the stock F-104G and SFP1 for the cockpit files.
or follow these precious instructins: http://combatace.com/topic/57393-flyable-f-104s-for-sf2/
-------------------------------------------------------------------------------------------------------------------
 
Installation:
 
Simply copy all the files in the respective directory of your game folder.
"User"\Saved Games\ThirdWire\StrikeFighters2
-------------------------------------------------------------------------------------------------------------------
 
Credits:
 
Original F-104B: Ajunaidr
Added 3D parts and Fuel Tanks: Spillone104
Textures : Spillone104 and Paulopanz
Decals : USAFMTL (Dave) and Paulopanz
Fake pilot mod: FastCargo
INIs : Spillone104
Effects : Spillone104
Sounds : Spillone104
 
Beta testers : Starfighter2 and Paulopanz
 
-------------------------------------------------------------------------------------------------------------------
 
Legal stuff:
 
This mod is freeware. Commercial use is not allowed.
 
------------------------------------------------------------------------------------------------------------------
 
 
Enjoy and good flight. :)

Yak-28 for SF2 Readme
 
Yak-28 Bomber, Trainer plane (1959)
 
Model based on Yak-28B model by Pasko, sound by Spiloone 104
 
A4-E Cockpit repaint by Wrench
 
red5202 pilot by The Trooper
 
plane required SF2 Soviet Bombs pack, please install it before
 
http://combatace.com/files/file/11667-soviet-bombs-pack/
 
To Install:
 
- unpack Archive in temporary folder
 
- copy Yak-28 folder to Aicraft folder.
 
- copy Sounds to Sound folder
 
- copy pilots to Pilots folder
 
- copy Fuel tanks & MER to Weapons folder (Weapon racks KD3-226-250 & KD3-226-500 has ini only section, they need for 6 FAB-250 / 4 FAB-500 loadout)
 
Plane specifications:
 
Yak-28:
 
- Engine R-11AF-300
 
- NR-23 gun
 
- max flight distance 2200 km
 
- Mach limit 1.74
 
- Bombs loadout
 
- 6 FAB-250 type bombs (1620 kg max)
 
or
 
- 4 Fab-500 type bombs (2120 kg max)
 
or
 
1 FAB-1500 or 1 FAB-3000 type bombs (3200 kg max)
 
Yak-28 features:
 
- animated canopy
 
- animated air intake cone
 
- animated nozzles
 
- grag chute
 
Yak-28 production: (10-15 planes 1959-60), used for training only Replaced by Yak-28B, painted natural metal only