By paulopanzAfter WWII 31 Lavochin La-5FN fighters and La-5UTI were incorporated into the inventory
of newly formed Czechoslovak Air Force.
Czechoslovakia became the sole operator of the La-5FN outside the Soviet union.
In the CAF the La-5FN were designated S-95 (S for Stihacka - Fighter).
These aircraft remained in use after the type had been withdrawn from Soviet union.
By the end of 1948 most La-5FN had reached the end of thier life and were gradually
withdrawn from service use.
- A brand new postwar La-5FN/S-95 plane
- 5 new CVL skins
- A-TEAM/CAPUN plane model * (Lod not included)
- paulopanz skins factory & decals
- all in your mod folder and overwtite
- take La-5FN-R2.lod from A-TEAM "StrikeFighters2 WW2Finland" install and put inside "La-5FN".
I'm going to upload a serie of A-TEAM/CAPUN great WWII planes post war remodded.
I'ld wish again that CA and A-TEAM great sites and people could find a way to be a whole great community, because togheter we will be all richer and stronger.
So don't post anything against anyone here, please.
Let's make mods and not mod-wars!
An early post war German clash coud be wellcome. Some more pieces are incoming ....
By cocasYak-9P ver 1.0
Cocas (3D model),Paulopanz (Skins) ,Baffmeister (FM) and Pasko (Cockpit)
weapons and guns are from 331killerbee´s weapons pack
credit goes for who ever made them
By paulopanzLa-9 entered production in August 1946. A total of 1,559 aircraft were built by the end of production in 1948. La-11 entered production in 1947. By the end of production in 1951, a total of 1,182 aircraft were built. They were two piston engined aircraft produced at the start of the jet age.
- 2 planes (the La-9 upgraded like Wrench's SF-2 La-11)
- new Stary's pit implanted
- 24 new & revamped skins (VVS, PLAAF, NKPAF & FAR)
Known issues: shadows
1st SF-2 upgrade: Wrench
Sound: rebel ryder
Skins, Decals, edits: paulopanz
- 'La-9-11 Mod' folder content in main mod folder and overwrite
By Wrencha-11 Fang by Bunyap, For SF2
= For SF2, Any and All =
Note: although NOT strictly a WW2 aircraft, but immeadite Post-War. This'll give the Mustangs, Spitfires and such something to else to tangle with in the late 1940s.
Some modifications, tweeks, and various fiddles with Bunyap's Lavochkin La-11 "Fang", bring it into SF2. This is the complete package, with cockpit, skins/decals, and engine sound.
Skins included are:
NK_CVAF (North Korean, Chinese "Volenteer" Air Force)
NKPAF (NK silver-gray)
NKPAV_Green (dark green camo)
The decals inis have been rewritten to use as many stock decals as possible. The NK Green, however, has new decals made for the KAW mod with semi-historical numbering.
New hangar and loading screens are included, now in jpg format. The hangar screen is an SF2-style rebuild of my original 'box art' version.
It should be noted, that due to the age of model (ie: it's from 2005!!) there are many issues that are unfixable. One of the major ones, is the shadows are turned OFF, as there are huge 'tractor beam lines' extending from the aircraft. You just have to live with them.
As always, fairly easy to follow, yet detailed install instructions are included. Please read them!
By WrenchYakovlev Yak-9U, -9UT and -9P "Frank" by Pakso
= For SF2, Any & All versions (Full-4 Merged Prefered) =
*Note: Full-4 merged prefered tag is because some decals used are referenced from SF2:I*
MOdifications, tweeks, FM enhancements, and so forth to Pakso's Yak-9 WW2/Korean Era/Early Cold War Soviet & satellite countries fighter.
This package contains 3 aircraft:
Yak-9UT (made from the data ini supplied by Pasko on the original release) *Note: these have the plywood aft fuselage, hence no rivets*
Yak-9P will full metal fuselage (export version?)
The 9U & 9P have the standard arament of 2 12mm machine guns and single 20mm cannon through the prop hub. The 9UT has 2 20mm upper deck cannon and a 37mm gun through the prop hub (T= anti-tank. Works great against bombers too!)
All aircraft have new, enhanced FMs for SF2. While pretty close, there is probably some room for improvement - this is !ENCOURAGED! for those with the skills and time to accomplish.
All aircraft have completely NEW skins, created from a Home-Grown Templates (patent pending), and how have the correct color schemes, as well as corrected/new panel and rivet lines for the variant (9U/UT is different from 9P). All national marking and 'Bort' numbers are stock, in-game decals. Userlists are incuded for all three.
All guns and weapons, excepting bombs which are stock, are provided in this pak, as well as Pasko's pilot figure. As expected, the canopy opens/closes via manual animation keystroke -the (in)famous Shift/0. A new in-line V-12 sound, from many of the WW2 mods, is included.
A quick note on guns: the nose cannon on ALL variants has been set as "Fire_Secondary_Gun", so make sure you have a seperate button mapped for it's use.
As always, fairly easy to follow, detailed install instructions are included. So, please read them. Also, give the "Notes" section a read for further information and stuff like that there. For historical purposes, Pasko's original readme is included.
By baffmeisterA basic update for Pasko' s Yak-3.
The original Normandie-Nieman skins for WW-2 use and the original Yugoslav skins for post war use, both changed to JPEG format.
The original Klimov engine sound.
The original Yak-3 pit with some ini edits.
A Soviet WW-2 Pilot.
A new SF-2 compliant FM. The FM will probably work in SF-1 installs at the final patch level but hasn't been tested.
PASKO for the model and skins.
KESSELBUT for the Yak-3 cockpit.
BAFFMEISTER, STARFIGHTER and THIRDWIRE for the Flight Model.
I got the Soviet WW-2 pilot from WRENCH but not sure who made it.
Install instructions and more info included in the Read Me.
WAIVERS: For freeware use only, commercial use not permitted!
By paulopanzThe Lisunov Li-2, originally designated PS-84 (NATO reporting name "Cab"),
was a license-built version of the Douglas DC-3. It was produced by Factory #84
in Moscow-Khimki and, after evacuation in 1941, at TAPO in Tashkent.
The project was directed by aeronautical engineer Boris Pavlovich Lisunov.
This is the post war turretless model rebuilt by me from the stock C-47A.
18 Skins: 3 PLAAF, 1 CVL, 1 FAR, 2 NKPAF, 2 ML, 1 PWL, 5 VVS, 1 SyAAF,
1 VPAF, 1 Yugo each one with its historical decalset
hangars, loding and loadout immages
- Wrench for templates
- Kesselbruth for C-47 pit (I'm still looking for a russian styled one)
- Kubit for PWL decals & references
- Gaunt for Hungarian stuff help
All in main mod folder and overwrite.
I hope this could be used in most of our campaigns from Nato Fighters, to Vietnam,
Sweden, as in Mid East, Korea and in Taiwan, too.