+LloydNB 212 Posted October 7, 2009 (edited) The plan worked perfectly! Mind you we always reckoned it would only take a little nudge to convince an Italian boy from Jersey to start an new WWII Italian model. Lloyd Edited October 7, 2009 by LloydNB Share this post Link to post Share on other sites
+Veltro2k 6,351 Posted October 7, 2009 The plan worked perfectly! Mind you we always reckoned it would only take a little nudge to convince an Italian boy from Jersey to start an new WWII Italian model. Lloyd I actually was convinced one was already released thats why I ignored it till now Share this post Link to post Share on other sites
+LloydNB 212 Posted October 8, 2009 I didn't realise until now that Wrench had done all the Hawk squadrons in the Battle of France. I might just release this skin and then do a Vichy one for Morocco/Algeria. Lloyd 1 Share this post Link to post Share on other sites
Wrench 9,893 Posted October 8, 2009 (edited) Actually, it's all the same skin bmp; Heck Mitchell did all the squadron decals (and a SUPERB job, too!!! I didn't -and still don't know enough about AdA squadrons and markings, so....) There's a Vichy Hawk skin, too, that I did. But it SURE could use a little update!!! Like, it's rather generic in it's markings. Sort of a "Plane Jane" (get it?? <grin>) at my site: http://wrench1smog.com/aircraft/hawk75_vf.zip here at CA: http://forum.combatace.com/index.php?app=downloads&showfile=6697 There should also be a Vichy DB-7 around here/my site too. The DB-7s, both AdA and Vichy could use a data ini tweek, to remove the exhaust nipples, like I did on the A-20A for Pearl Harbor, and the early strafer SoWesPac version. I'll gladly share my templates, if that'll help! (painting those yellow/red markings was a frakking nightmare!!! Maybe you can clean it up some!?!??!!!) They SURE could use some better squadron markings, too ..... wrench kevin stein EDIT: your skin looks SOOOO much better than mine, I'd just do a update pack, saying "this replaces the original skin as done by The Wrench, with Heck Mitchell's AdA Squadron decals.. Install instructions: unzip, and drop a copy of the P-36ATex.bmp into each of the Hawk75_AdA skin folders, allowing it to overwrite Wrench's crappy orignals (wrench's words, not mine). Go fly! or words to that effect.... W Edited October 8, 2009 by Wrench Share this post Link to post Share on other sites
+LloydNB 212 Posted October 11, 2009 Early stages. Lloyd 1 Share this post Link to post Share on other sites
+Veltro2k 6,351 Posted October 11, 2009 Early stages. Lloyd Niiiiiiiiice Rising Sun Cicogna Share this post Link to post Share on other sites
+LloydNB 212 Posted October 11, 2009 (edited) And done!!! Based on a picture of a 12th Sentai Br.20. The characters on the vertical stabilisers say "Honour". Posting soon. Lloyd Edited October 11, 2009 by LloydNB 1 Share this post Link to post Share on other sites
Wrench 9,893 Posted October 11, 2009 Damnit Lloyd!!! You're gonna MAKE me finish these, aren't you??? Have to revisit my home-made templaes, and add some shading. The mapping on one of these is a little "off", but can't remember where or which!! Never could find proper historical numbers for one of them -- again, can't remember which A CAF version of Monty's Hawk III (Export), and the CAF P-26 should already be in the D/L sections. wrench kevin stein Share this post Link to post Share on other sites
Shaolin 0 Posted October 11, 2009 Early stages. Lloyd Looks like the mapping on the upper side of the fuselage is heavily distorted... (The mapping, not your skin!) Share this post Link to post Share on other sites
+LloydNB 212 Posted October 11, 2009 (edited) Shaolin Most aircraft here are mapped left/right and so there are inevitable issues as the skin stretches over the top and bottom of the fuselage. If the fuselage shape is roughly spherical the effect is minor. But if the fuselage cross-section is square (as in the BR.20) the stretching is more pronounced. Its just something that you work with. Wrench Yes, finish them! I'll add a Chinese P-36 skin this week. I think the Nationalists had two no.2 &4) that flew operationally. A factory was set up to manufacture more but it was relocated to India before any aircraft were built and the P-36s were incorporated into the RAF as Mohawks. Lloyd Edited October 11, 2009 by LloydNB Share this post Link to post Share on other sites
Wrench 9,893 Posted October 12, 2009 (edited) Chinese Peashooter: http://forum.combatace.com/index.php?app=downloads&showfile=7608 wrench kevin stein edit: ooopsy! I thought you meand P-26, not CAF Mohawks. my mistake!!! Edited October 12, 2009 by Wrench i made a goof Share this post Link to post Share on other sites
Shaolin 0 Posted October 12, 2009 Shaolin Most aircraft here are mapped left/right and so there are inevitable issues as the skin stretches over the top and bottom of the fuselage. If the fuselage shape is roughly spherical the effect is minor. But if the fuselage cross-section is square (as in the BR.20) the stretching is more pronounced. Its just something that you work with. Wrench Yes, finish them! I'll add a Chinese P-36 skin this week. I think the Nationalists had two no.2 &4) that flew operationally. A factory was set up to manufacture more but it was relocated to India before any aircraft were built and the P-36s were incorporated into the RAF as Mohawks. Lloyd I know, the "cheap" way of mapping ... And that's one of the reasons my first model is still far from completion - I have to learn "real" mapping first (the other main problem is a lack in motivation:boredom:)! BTW: It will be a WWII model... Share this post Link to post Share on other sites
+LloydNB 212 Posted October 14, 2009 Good Greif!!! Progress on the D.520 skin. Lloyd 1 Share this post Link to post Share on other sites
+Veltro2k 6,351 Posted October 15, 2009 Good Greif!!! Progress on the D.520 skin. Lloyd Looking Great Share this post Link to post Share on other sites
Wrench 9,893 Posted November 2, 2009 I absolutely, positively HAD to take a break from the Tunisia map...so I started on finishing off/beginning a couple of airplane projects. Among them are a 272 Sqdn skin for the Beau 6 (Malta based), a USAAF nightfighter skin; the aircraft will be "nationalized" and for either 414th, 415th or 416th NFS -which ever kept their Beaus til war's end and these AAF Spit 5s: 31st FG; 307, 308 and 309th FS (no piccy for 308, as I'm still doing up the serial number decals) wrench kevin stein Share this post Link to post Share on other sites
Wrench 9,893 Posted November 10, 2009 (edited) Just fiddelatling around.... not the least bit happy with the LW desert camo, but due to crazy mapping issues on the aircraft...(and the fact that it seems no 2 aircraft in the squadron had matching paint jobs...its like, well 'whatever!') some poetic liscene is used on the RA version, as it didn't have the grupo badge on the fuselage; was actualy on the wheel spat , and no squadron numbers or other id tags. It just looked to nekked 'the right way' wrench kevin stein Edited November 11, 2009 by Wrench Share this post Link to post Share on other sites
+Veltro2k 6,351 Posted November 19, 2009 greaT !!!!!!!!! Share this post Link to post Share on other sites
+76.IAP-Blackbird 3,557 Posted November 19, 2009 who made those birds ... looking great! Share this post Link to post Share on other sites
Wrench 9,893 Posted November 19, 2009 The Hawk 75/P-36A is in Wolf's WW2 Planes Pak. THIS one, the Vichy skin, is based off that, but with a different LOD. I had Capun shave off the nose gun blisters, as there was a mapping issue. The original AdA BoF version is available here and my site, as is my hack-job Vichy skin as well. (rather generic in nature -- Lloyd has turned the sow's ear into a silk purse!!) Righteous skin dude!!! wrench kevin stein Share this post Link to post Share on other sites
Wrench 9,893 Posted January 25, 2010 WOOT! Marauder!! wrench kevinstein Share this post Link to post Share on other sites
